Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

Flush mount

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

For PRO-LTB LJ LH LHAB

MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

For 3/4 & 1 HP Micanan trolley operators

.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-J-5081-U-RH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

350g

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

.319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7521-U

Micanan 3/4HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5053-U

Micanan 1/2HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board

PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
2-btn control station Open/Close
Fully adjustable limit system
Pad mount
Security+ 2.0 technology

.......more details

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CGH755-L5

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MM00021

Micanan Disconnect Lever MSI0012

CAPXL

LiftMaster Connected Access Portal High Capacity

Connected Access Portal High Capacity Cloud-based access control for residential communities.
Capacities: 4 Controlled Gates/Doors
Wireless Link for up to 8 LiftMaster® Operators
4 to 8 Digit Entry Codes
4 to 6 Digit Directory Codes
50000 Local Resident Capacity

.......more details

CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

MV-00354

Micanan Control Station 3-Btn O/C/S N4 Surface Mount c/w Key Lock-out & Red Pilot Light 24V

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB810-36

Laminated Bumper Standard Black 10" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet

HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
Powdercoated Grey
For use with 7/16" stem rollers

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

For old 455 Automatic Doorman opener

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

MV-00296

Micanan Wireless Push Button Station OCS for Logic 10.0

Used only on Logic 10.0 program 3.2.5

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

37561S.S

Genie Belt and Bullet Assembly 8ft

For use on 8 ft doors
Compatible with the following:
SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
ReliaG 650 (Model 1028) 850 (Model 2028)
IntelliG 1000 (Model 3024)

1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

Sold per piece no box quantity

MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

For 1/2 Hp 110V operators

25C20

LiftMaster Screw Drive Coupling K025C0020

MM00020

Micanan Disconnect Arm

WEL-200

EMX Wireless Edge Link Transmitter / Receiver Kit

Provides a complete wireless solution for interfacing sensing edges with gate and door operators
The Wireless Edge Link eliminates the wiring between the safety edge and operator control box
No wiring needed reduces installation cost
Compatible with NC 10K and pulse monitored outputs
Operates two years on two AA lithium batteries
Connect up to 4 safety edge transmitters

.......more details

OCDFX3

Overhead Door 3-Btn Transmitter 315/390 Mhz

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX3.S GIDFX3.S

CHK-991

Chain Hoist Keeper

Chain hoist keeper is not the same as the chain keeper

1461-LCN

LCN Door Closer with Regular Arm and PA Bracket

Aluminum finish
Can be used for both commercial and institutional applications
Can be mounted on either left or right swinging doors
The spring power of a 1461 cylinder is field adjustable from size 1 through size 6 and is shipped adjusted to size 3.

OPH-6532-ECB-LH

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

ALUM-538

Aluminum 24" x 100' Spool Wicker / Cafe # 538

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 538
Reverse side is #431 Bright White

Colour chart

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

.207-3-7.5-RHW

Mini Storage Spring .207 x 3" x 7.5" long Right Hand

GH-3-LH

Doorlec Industrial Jackshaft Door Operator 3 HP 575V 3P TEFC Motor Left Hand

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

3/4" x 16-5/8"

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LITH-9V

Battery 9 Volt Lithium

1-4-3

Spring Extension Clip Medium-Heavy

10-1036-4

Whiting 2" Nylon Roller 5" Stainless Steel Shaft for Truck Doors

A Whiting original part
Stainless steel bearings stainless steel shaft

MGJ-5011U-RH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Right Hand

MGJ is designed for use on rolling grilles and shutters.
Maximum recommended duty cycle: 12 cycles per hour.
Heavy-duty wormgear-in-oil-bath speed reducer
3-button station for open/close/stop functionality
315 MHz radio receiver is integral to the Medium-Duty Logic board
UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)

.......more details

Installation manual Sell sheet

PRO-HHD-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation manual Specification sheet

BEA-10-FALCN-XL

BEA Falcon-XL Motion Detector Mount under 11'5"

Same features as the Falcon detector but made specifically for extra low mounting
Mounting height between 6.5' and 11.5'
Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor
Sensor also has the ability to differentiate between pedstrians and vehicles
Available remote makes it easy to make adjustments to all key parameters of the sensor while at ground level
Remote is sold separately

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

MH00097

Micanan Bearing 1/2"

CHAIN036

Manaras Jackshaft Drive Chain #60 - 1R10'

Includes 1 chain link

785105

FAAC XP30 Photocells 30m Range Relay

Hardwired pair of Photocell relays
30m Range
IP54
24v
Dimensions: 55 L x 78 H x21 D mm

9234001.003

Overhead Clutch Shaft Assembly with Double Pulley SFL

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-H-5011E-LH

Micanan 1/2HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

880LMW

LiftMaster Smart Control Panel Sec+ 2.0 Wi-Fi

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Programming instructions Instructions de programmation

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

28-30080

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Curbside (RH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PW-110

Devanco Power Wipes Heavy Duty Dual Sided Cleaning Towels 110/Bucket

These towels have an abrasive side for tough scrubbing and a smooth side for delicate surfaces.
They are loaded with commercial grade cleaning power and won't dry out like the competition
110 double-sided 12" x 8" towels Citrus scent
Safer than harsh thinners or gasoline
Use on nonporous/nonabsorbent surfaces to include: all metal surfaces sealed wood equipment vinyl and ceramic tile.
We recommend testing on plastics rubber and latex paint in inconspicuous areas before use.

.......more details

Safety data sheet Fiche de données de sécurité

CP-BRC-12

Lynx Resettable Circuit Breaker 12 AMP

Used on MCJH 3/4 hp 120V operators

7543.2

Whiting Bottom Panel with Seal & Channel TempGuard 13-5/16" x 95-1/4" FPW

Replacement for serial # 164352

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

MB-01003

Micanan Electric Motor Only 1/2HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC
All settings are available directly on the unit or via the remote control

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

TILT-5

Tilt Detector

State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
Safeguards against rolling steel door failure where conventional devices miss
Automatically stops the operator to keep door within safe parameters

Sell sheet

12123

Doorlec Coupling 1-3/4" x 5/8" bore 4 Pins

Used on model LJH

MJ5011U

LiftMaster Medium-Duty Jackshaft Op 1/2HP 115V

The MJ door operator is designed for use on vertical lift sectional doors or small rolling doors and grilles.
Maximum recommended duty cycle: 12 cycles per hour
Floor level disconnect
Adjustable friction clutch
Heavy-duty solenoid actuated brake
Easily field converted for right or left mounting

.......more details

Installation manual Sell sheet

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys
H=7" W=2-3/4" D=2-3/4"