Devanco Canada - Get The Right Garage Door Opener‎ and Parts

8FT-RAIL-BELT

LiftMaster 8' belt drive rail 2778BD - colour code: White

Price reflects cost if purchased with an opener

7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

Price reflects cost if purchased with an opener

STAR1000

LiftMaster Commercial Access Control Receiver Security+ 2.0

Security+ 2.0™ technology provides 2X the range of standard remote controls
Compatible with HomeLink Wireless Control System
1000 remote capacity to support large quantity remote control requirements
Single and block addition
Supports suspending and unsuspending of remote controls to withhold and reinstate access
Designed for outdoor environments

.......more details

Programming Instructions Instructions de programmation Sell Sheet Brochure

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.218_2"-LH

Torsion Spring .218 x 2" x 12ft LH Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft

.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 1-3/4"
Length: 12 ft

894LT

LiftMaster 4-btn Sec+ 2.0 Learning Transmitter

Liftmaster 894LT is designed for Sec+2.0 and Sec+ applications
Replacement for Models 374LM and 974LM.
Compatible with the following Sec+2.0 Sec+ Dip-Switch when cloning other Dip-Switches Remote Controls such as: 811LM 813LM - Sec+2.0 331LM 361LM 362LM 363LM 333LM - 315Mhz Sec+ 61LM 63LM - 390MHz Burst Technology.
Sends out multiple frequencies on the same code at the same time (Sec+2.0 only) 2 and 4 button options
Typically used in gated communities along with a garage door opener.
This single remote control will allow you to copy the code used for the gate instead of carrying 2 remote controls in the vehicle.

.......more details

Programming Instructions Instructions de programmation Sell Sheet

829LM

LiftMaster Garage and Gate Monitor Sec+ 2.0 **to extent of inventory

This innovative monitor lets you check and close the garage door or gate from any room in the house.
Green and Red LED lights indicate whether the garage door or gate is open or closed.
Volume controlled audible alert lets you know when the garage door or gate is being opened.
Able to monitor and close up to four garage doors or gates.
Compatible only with new Sec+ 2.0 MyQ compatible garage door and gate operators.

Programming Instructions Instructions de programmation

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003

Installation Manual Manuel d'Installation

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

03-8024-K

Reversing Contactor 3-Pole

Reversing contactor with 24 VOLT coil
Dimensions: 3.5" long x 2.25" wide x 2.25" high
Telemecanique part # LC 2K09 107B7

19-48ML

Master Link #48

For #48 chain (#410)
Same as #65 chain

144C54

LiftMaster Idler Belt Pulley

Wide idler belt drive pulley
For square rail assemblies

41AB050-2

LiftMaster Electronic Circuit Board Assembly

Assembly includes: Logic board end panel and light sockets
For belt drive models with 2-lights
Also known as 41AB050-2M

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

41A5021-I

LiftMaster Electronic Circuit Board Assembly ** To Extent of Inventory

Assembly includes: Logic board end panel and light socket
For chain drive models with 2-lights
Fits 1265 Security + 390MHz
Also known as; 41A5021 41A5021-B 41A5021-C 41A5021-D 41A5021-E 41A5021-F 41A5021-G 41A5021-H

885LM

LiftMaster Wireless Control Panel Security+2.0

For use with Security+ 2.0 garage door openers that have a yellow Learn button.
The wireless control panel can be used as a secondary device to open & close the garage door and to turn on & off the lights on the opener.

885LM Manual

.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

Wire size: .283
Inside diameter: 6"
Length: 12 ft

.375_5-1/4"-RH

Torsion Spring .375 x 5-1/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

13-10024

LiftMaster Limit Nut

Limit nut / cam for commercial door and gate operators

19-41ML

Master Link #41

For #41 chain
ANSI Standard Carbon Steel

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

MI00006

Micanan VBelt 5L 32.5" 5L325

PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

For models built from 2000+
Comes with photoeyes wire and bracket

RP-SW-LIMIT

Lynx Limit Switch for old model 455

Limit switch for old Lynx 455 with metal cover

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

Installation Manual Sell Sheet

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

TRANSF143

Manaras Transformer 120/240-24V 40VA

Transformer 120-240V Primary 24V Secondary 40VA

SOLENOID004

Manaras 575V Brake Solenoid

Same as 22-575
Fits on all 575V garage door or gate operator brake system.

RADIO-RE101C

Manaras Factory Installed Mod plug-in receiver for Board 70 operators 390 MHz

Direct ECB plug-in receiver card (factory installed)
16 transmitters maximun per receiver.
Use part # RADIO-KIT004 when adding or replacing on-site.
This is now standard equipment on all Circuit board operators

RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

Open/Close mini remote for 1 door
Comes with LED battery life indicator
Mini 12V battery included
Key chain holder included

2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .162 x 2-3/16" x 18" Long
For Curbside order part # 2705.162*180

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 19683 (set by nine trinary dip switches)
RF frequency: 318 MHz
Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787

.......more details

Programming Instructions

MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

Activates one Delta-3 receiver
Test/operate LED
Key ring not supplied
Power: 12 V battery
Frequency: 310 MHz
Codes: 256 (set by dip switches)

.......more details

Programming Instructions

DR4

Linear 4-Channel Delta3 Receiver 310 MHz

Activates four devices or UP DOWN STOP for one commercial device
310 MHz 8 dip switch
Power: 24 VAC/VDC
Dimensions: 4.9" W x 4.2" H x 1.3" D
Same as DNR00023A or DR4V

Programming Instructions

8833T-OCS

Allstar 3-btn 1-Door O/C/S Transmitter 109372 318 MHz *** To Extent of Inventory

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

600BH

6" Heavy Brush Insert 8ft Long

Polypropylene bristles

600BL

6" Light Brush Insert 6ft Long

Polypropylene bristles

100BL

1" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1701

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

5" yellow vinyl insert 150ft spool.

DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

310 MHz frequency 8 dip switches for coding 256 possible codes
24V AC/DC input power 3 terminal connection
Activates one device
Dimensions: 5.5" W x 4" H x 1.25" D
Same as: DNR00001

Installation Manual

1003-3"-200FT

Bottom U-Rubber 3" Black 200' Long

200ft spool of vinyl insert.

1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1104-16FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

RCB-2560

Roller Chain Break #25 thru #60

Replacement tip included.

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

For the temporary repair of a broken spring.
Wire size: .2187 - .3065

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

25-42-110

Extension Spring 7' Door - 110 lbs White

Double - Loop
25" long 42" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

26-40200

Truck Door Head Seal Only 96" Long for Roll-Up Doors

Seal molded from long lasting rubber
Cross Reference: T #69718 630300

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

CHS401

Chain Hoist Shaft Mount 4:1 JR 4020 Torque Force (126684)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

Z9403

Coupler 1" Bore Adjustable

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway

DM28VL

Cable Drum Vertical Lift 28' 1350-28 Pair

28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".
Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.

.......more details

DM32-125

Cable Drum Standard Lift 32' 800-32 (1-1/4") Pair Torque Force

32 ft Standard lift aluminum die cast alloy cable drums for 1-1/4" shaft.
Pair includes (1) LH & (1) RH. Color coded: Red=LH and Black=RH.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Maximum Door Height: 32'-1".
Rated Lift per Drum: 1000 lbs.
Max Cable Diameter: 1/4".

.......more details

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

41A5034

LiftMaster Snappy Beam Sensors ** DISCONTINUED USE 041-0136

Will work on all LiftMaster residential openers equipped with safety beams
For newer models 1999-current will fit on existing brackets
For older models 1993-1999 new brackets #41A5266-1 are required or use old style safety beams #41A4373A
New Gen ( 2021+) operators will have new snappy beam sensors part number 041-0136
Not compatible with the New Gen (2021+) 041-0155 snappy beam brackets

41C4220A

LiftMaster Chain Drive Gear & Sprocket Assembly

Installation Manual Manuel d'Installation

25-10200

Truck Door Top Bracket Assembly for Todco Roll-Up Doors

Steel construction Zinc plated
Heavy-duty design
Assembly includes: Base Slide Bolt & Washer
Cross Reference: T #69433 W #4039

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1104-9FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 9' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

2200-555

Linear Sprocket 40A48 Machined

BUSHING055

Manaras Limit Shaft Bushing

5001-7-DK-BROWN

Residential Side & Top Weather-Strip 7' Long - Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

COOKSON-45-GREY

Rolling Steel Slat 3" Cookson Insulated with Wind Locks

Special order

10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

Fits model H operator with Logic 5
This item is now only sold in a kit. To order use code K72-19979

MR00008

Micanan Disconnect SASH Chain Sold per Pack of 10'

K41-0248-000

LiftMaster Alarm Kit for INSL24UL/IHSL24UL

Compatible with the following models: IHSL24UL IHSL24ULMC INSL24UL INSL24ULMC

BRAKEPART018

Manaras Brake Shoe Assembly Kit

Kit includes SHOE001 & SHOE002 for old brake system.
Fits all Manaras operators except gear head made prior to 1999.

Drawing

CR2032

Maxcell 3V Lithium Button Cell

12562

Doorlec Lower Brake Shoe - Left

Fits on all Doorlec operators equipped with brake shoes
Use with drum #12561

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

20-2LMC

LiftMaster 2-Strand Bell Wire 500ft White/Red

2 strand 22 gauge tin-dipped copper hook-up wire
Color coded White & White/Red wires

CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

.331_2-5/8"-RH

Torsion Spring .331 x 2-5/8" x 12ft RH Red/White

Wire size: .331
Inside diameter: 2-5/8"
Length: 12 ft

SLT2-22

Rolling Steel 2" Crowned Slat 22-ga Galvanized

8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

Open/Close remote for 3 doors
Compatible with Allstar and MVP receivers
Visor mounting clip supplied
Power: 9-volt battery
Codes: 6561 (set by trinary dip switches)
RF frequency: 318 MHz

.......more details

Programming Instructions

GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 20" Long
Roadside
For Curbside order part # 2807.171.200

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

24-24-2

LiftMaster Relay 24VAC 8-Pin DPDT

PRO-APTB-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

893LM

LiftMaster 3-btn Transmitter Sec+ 2.0

Controls up to three garage door openers or gate operators or MyQ® enabled light accessories
Equipped with Security+2.0™ rolling code technology that virtually eliminates radio wave interference
3V lithium battery included
Compatible only with Security+2.0™ LiftMaster® garage door openers or gate operators
Equivalent to Chamberlain's 953ESTD

Programming Instructions Instructions de programmation

SHAFT002

Manaras Hand Crank Shaft 5/8" Sold per Foot Max. Length 12ft

Must specify exact length required when ordering

387LMC

LiftMaster Universal Wireless Keyless Entry

Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
Wireless – powered by one 9V battery (included)
Weatherproof slide-up protective cover
Open or close the garage door without using a remote
Backlit keypad

.......more details

Programming Instructions Instructions de programmation Sell Sheet

GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

Extra heavy-duty industrial-type electric door operator for damp environments.
Worm gear reducer 40:1 ratio
#50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
Door speed: 7 inches per second (approx.)
Adjustable torque limiter (also called friction clutch)
Rotary type limit switches

.......more details