Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MV-00245

Micanan Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set

50346

Doorlec Electric Switch and housing for Mechanical Edge

50150

Doorlec Electro-Mechanical Safety Edge and Weatherstrip Sold per Foot

For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.

.......more details

MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys keyed alike
H=7" W=2-3/4" D=2-3/4"

K001-KEY

Replacement Key for 3BXLT Key #1

Replacement key only for key #K001

WPS-1H-110V

Wall Pull Switch with 110V Heater

Wall Pull Switch Nema 4 Momentary Contact
Made of Aluminum DieCast
Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
Designed for industrial doors and fast moving lift truck operators.
Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)

.......more details

02-403N4-XALD

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Black Black Red

Open/Close/Stop allows complete control of the door.
Compatible with all commercial door operators.
NEMA 4 4X 12 13
Outdoor surface mount station with polycarbonate enclosure Part # XALD03H7
Dimensions: 2.0" x 5.27" x 2.68" (H x L x W)

INTERFACE003

Manaras Y-Connect Signal Merging Module

N4 compatible with 2 x monitored entrapment protection devices
Compatible primary devices: PHOTO061/061A/065/070
Secondary devices: monitored photocells light curtains electric sensing edges and/or non-contact sensing edges

MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

02-411

LiftMaster Pull Switch Assembly Nema 4

May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).

CPS-OPEN4

LiftMaster Monitored Dual-Sided Photo Eyes

For use with sectional or rolling doors.
May be installed in areas exposed to rain or moisture
Rubberized for more durability
Will work on LiftMaster residential operators

Installation Manual Manuel d'Installation Sell Sheet

PC50CNT20KIT

Carlo Gavazzi Transmitter and Receiver Thru Beam Kit 20m Range (PC50CNT20R and PC50CNT20RP)

Kit includes PC50CNT20R (emitter) and PC50CNT20RP (reciever)
Operates on 12-240 VDC and 24-240 VAC supply voltage.
The PC50CNT20R has a 3 amp relay output
Adjustable sensitivity modulated infrared light make and break (light/dark) switching function LED indications for output ON signal stability and supply ON
Same as Albany 4904R0007 / PC50CNT20RP8M1370

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

AW-14

Miller Edge Air Wave Switch in ABS Box

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Molded enclosure
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm

.......more details