Devanco Canada - Get The Right Garage Door Opener‎ and Parts

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

MS00003

Micanan Carriage for PRO-APT / T

For model PRO-APT / T

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

Waterproof photoeyes.
for direct connect to operators with Logic boards. L3 L4 L5
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
These eyes will also work on the Micanan UL325 monitored operators

Installation Manual Manuel d'Installation Sell Sheet

AA

Battery AA Alkaline Duracell Procell Sold Individually

Sold Individually

17315

Doorlec DC-3200T 32-Channel O/C/S Transmitter 313 MHz

Wall mount transmitter for 32-doors
Includes 9V battery
Old style

Programming instructions

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

DOORARM001

Manaras Door Lifting Arm Assembly

Complete door arm assembly for all Manaras trolley operators.

SPREADER001

Chain Tensioner for 1" shafts

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

Fits Coldsaver Roll-Up Doors
1-1/8" thick 96" wide

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

1336.7

Whiting Stainless Steel Curbside Top Closure Bracket for 8" radius

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

2" Offset
For use with Light Brush or Vinyl Insert

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

25-10577

Truck Door Cam Lock Handle Only for Whiting Roll-Up Doors

Steel construction Black E-coat finish.
Cam lock allows one hand operation and easily accomodates padlock or car seal.
Can be used as a lift handle in open position
Back plate is offset to clear bottom seal retainer
Spring assisted handle eliminates door bounce
Handle Keeper Sold Separately. Use part #25-10578

.......more details

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

25-10501

Truck Door Max Strength Steel Lock (only) for Todco Roll-Up Doors

Superior strength heavy-duty cast grade 30 steel Zinc plated finish
Pins are mechanically fastened in place for optimum strength
Extra thick padlock provision designed for greater security
Trapped handle cannot pull out to bypass keeper resulting in tamper-proof lock
Spring assisted lock eliminates door bounce
Cross Reference: T #69571 280000

.......more details

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

5001-7-DK-BROWN

Residential Side & Top Weather-Strip 7' Long - Commercial Brown

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

T1B-DS

Lynx 1-btn Transmitter Dip Switch 303 MHz

Ultra secure mid-size transmitter with 8 dip-switches for coding
Compatible with HomeLink in-vehicle remote control
Can be mounted on visor with saddle clip or carried on a keychain
Visor clip and 12V battery included
Use with receiver (RA-LYNX-RCVR) for open/close on commercial operators
Same as model 2211-L (TX)

.......more details

Compatibility chart

2806.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 20" Long
Roadside
For Curbside order part # 2807.171.200

78LMC

LiftMaster Wall Control Panel

Wired multi-function control panel
Push-button is illuminated for convenience
Includes an adjustable light timer
For use with opener built January 1995+
Has a lock feature to cancel all radio control signals
Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318

.......more details

Installation Manual Manuel d'Installation

PRO-APTB-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

Guardian model

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

This receiver comes in a metal enclosure.
It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107480
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

MP00107

Micanan Mechanical Load Sensing Mod Left hand

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

41176R

Genie Shaft Assembly Kit 6070/6170

XF208VAC12

LiftMaster 208V Transformer Kit 1200

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

K093A0763

LiftMaster Rear Housing KPW5 KPW250

This is a replacement Rear Housing KPW5 KPW250.
For use with various LiftMaster® Wireless Keypad Entry Systems

NMTK

Linear MegaCode Wireless Keypad 318 MHz Grey

Wall-mountable backlit NMTK is a wireless MegaCode keypad
Requires: 3 AAA batteries for power
It can activate multiple MegaCode Receivers including Linear GDO’s and APeX equipped Gate Operators
User-selectable 1 to 6 Digit/Letter PINs
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Blue backlit keys for easy viewing

.......more details

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
1/2HP to 1.5HP Motors

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

4580-304-GRANITE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Granite Grey 458-20

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

For use with 1016

K20-1100B-2LP-H24

LiftMaster Electric Motor 1 HP 115/208-230V 1Ph Logic 5

For use with various LiftMaster® Logic 5.0 1-Phase Industrial-Duty Commercial Door Operators
Includes wiring harness

RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles of a 12' door
Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"

GAREX-PAINT-BRN

Garex Touch-Up Paint Commercial Brown

HAE00072

Linear WiFi Wall Station

This Wi-Fi wall station allows direct operation of the door operator and light using the buttons.
When connected to your local wireless access point you can check status get notifications open or close the door and manage user access from any location via the Linear Android or iOS app.
Requirements: To use with the app you will need:
a Wi-Fi network with internet connectivity
a strong Wi-Fi signal in the garage where you are installing the wall station
an Android or iOS smartphone or tablet

.......more details

TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

Suitable for applications up to 55 feet wide and 35 feet high
Self-supporting channel steel C10 & flatbar mounting assembly
Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
Frame mounted thru-beam photoelectric sensor
High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
Door speed of up to 12 inches per second

.......more details

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
Smooth quiet drop testing thanks to a durable viscous governor.
Simple drop-testing and ability to reset the door which makes for quick operational readiness.
Standard bottom bar slide bolt locks with an optional cylinder lock.
Slat Thickness: 22 gauge Flat slats

.......more details

51115

Doorlec Fire Release System

For fire rated rolling service doors connecting to existing dropout fusible link device
For GH and Belt Drive operators

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

DEV-RSFD-7500

Devanco Rolling Steel Fire Shutter 7500 UL Rated **Made to Order

Model 7500 shutters can be up to 13 feet and 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
Oversized fire shutters can be manufactured up to 20 feet wide.
Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection.
Pricing varies according to size and options selected.
This is a Made to Order item

DEV-RSSD-3000

Devanco Rolling Steel Service Door 3000 20GA Non Insulated Galvanized Slats **Made to Order

Model 3000 roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist manual lift electric operator.
Pricing varies according to size and options selected.

C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

For 1-3/4" thick door

33103

Overload 1.40 to 2.30A

Setting range 1.8-2.5A

1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

This is a field install accessory.
Also known as: Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.

ATV320U15M2C

Pivin Drapeau Telemecanique Variable Speed Controller 200/240V 1PH 2HP

INTERFACE003

Manaras Y-Connect Signal Merging Module

N4 compatible with 2 x monitored entrapment protection devices
Compatible primary devices: PHOTO061/061A/065/070
Secondary devices: monitored photocells light curtains electric sensing edges and/or non-contact sensing edges

STD-SS-MINI

Janus Mini Storage Latch Stainless Steel

Standard Stainless Steel latch

SF514U-W

Spring Fitting 5-1/4" Winding Side Only for 1" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

MA020D

LiftMaster Door Kit Mega Arm Tower

30003

Doorlec Brake Solenoid 115V with wire leads

Works with all 115 Volt Doorlec Commercial and Gate operators

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

E/1929/022

Automatic Systems Round Arm Ass'y 10' (BL229)

Used on the BL229 gate op.

K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
Will also work on L3 L4 operators

CHW401-114-TFRCE

Chain Hoist Wall Mount 4:1 1-1/4" 2000R Torque Force (126658)

4:1 Reduced drive
Sprocket: 41B36x114 Bore: 1-1/4"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Cross Reference: 2000R OMI 4006

Drawing Sell sheet

CP-SH-58-812

Lynx Complete Output Shaft Assy for TC3

Complete assembly with bearings

LIMIT024A

Manaras Double Snap-Action Limit Switch 2xSPDT 46 degree

MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

This will only work in the Pro LH operator.

27120

Doorlec Electric Motor 1/2HP 208/480/575V 3PH DC221

SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

CAP378

Capacitor 110/125VAC 378-454MFD

378-454 mF 125 VAC 50/60 Hz
Used on 1/2 HP LiftMaster operators

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm