Devanco Canada - Get The Right Garage Door Opener‎ and Parts

3002-200FT

1/2" inside diameter
Installed in bottom "U" rubber for use as a safety edge

6X20PO50

Devanco Loop 6' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MV-00019

Micanan Pull Cord SPST Lever Type - Nema 4

EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

Grey coloured metal hood (1 hood)

IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
The IRB-4X2 will work with any control board that accepts dry contact on the input.
The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
*Not for use in applications requiring UL325 compliance
Thru beam design is not affected by shiny surfaces
Wide 24˚ transmission angle allows easier alignment and increases reliability

.......more details

Spec sheet

MV00021

Swivel Type Pull Cord - SPST Nema 4

Data sheet

LSBLK

Loop Sealant Cartridge Black 29oz

Also available in grey (LSGRY)
Can be installed in sub-zero temperatures as long as the surface is clean and dry
Loop sealant gun sold separatley # LSGUN

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Allows uni or bi-directional sensing and the unique ability to open a door when traffic is moving away from the sensor
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC
All settings are available directly on the unit or via the remote control

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

MWTA12

Miller Edge Transmitter with Audible Alarm Small

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

PED4272

Pedestal Post 42" & 72" Dual Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look

BEA-10-LBA

BEA LZR Metal Bracket Accessory

Mounting bracket only for the LZR industrial sensors including: LZR-I30 LZR-S600 LZR-H100 LZR-U920/U921

IS40-XL

BEA Industrial Sensor Low Mount Dual Technology Presence Detection BEA-10IS40XL

Combines Microwave Motion Detection with Infrared Presence Detection
Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
Up to 7 minimum object targets
Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
For lower mounting heights from 78" to 138" (6.5ft - 11.5ft)
Designed with NEMA 4 enclosure

.......more details

Installation manual Sell sheet Cut sheet

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

CS303-DB50

EMX Car Sense Direct Burial Sensor with 50 ft Lead Wire ** Replaced by the LRS-DB-50

Can be used for above ground applications ie.. strapped to a post or wall
Easy low cost installation
Small size of the detector allow for easy installation in pavement
Rugged sensor is also suitable for above grade installations
Includes direct burial sensor and 50 ft of lead wire
Advanced 3-axis technology for better detection

.......more details

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

.......more details

Operating Instructions

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation Manual Worksheet Sell Sheet

K107A0031

LiftMaster Replacement Keys (2) for KPW5 KPW250

Replacement keys only

DWGK11

Bircher Air-Wave Switch DW40 with N4 Enclosure

Bircher pressure wave switch with connection terminals
6.3mm plug tab in impact-resistant plastic housing
For pressure wave switch series D1 grey housing bottom.
A pressure wave generated by pressing the sensing edge reaches the pressure wave switch.
The membrane deflects and the electric contact switches.
The electric contact remains switched as long as the input pressure is above the response pressure.

.......more details

Manual