Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SSZP10-6

Solid Shaft 1" Keyed Zinc Plated 10'-6"

RBH753L5-RH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Brake standard on all RBH operators
#48 chain #50 output sprocket chain
Comes with CPS-U photoeyes and 02-103 O/C/S push button

Installation Manual Manuel d'Installation Sell sheet

S2TR2641E2M

Erone 2-Channel Master Transmitter 433MHz

One master transmitter is required for each multi-user receiver for doing the programming.
Range in open space: 850ft or 250 m
One 12V lithium battery included
Bronze body with yellow buttons.

Sell Sheet Brochure

1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

BK100

Spring Anchor Bracket Mini USA Sold Individually

Adjustable residential center bracket
Bright zinc plated 12 gauge steel
Adjustable bearing plate
For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
For use with steel or nylon bearings
Bearings NOT included

.......more details

ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

Compatible with all Linear access receivers and controllers
Supplied with quick-disconnect key ring
Power: Two CR2016 batteries incl.
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 1.25" W x 2.25" H x .48" D

.......more details

Programming Instructions

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

86LMC

LiftMaster Antenna Extension Kit

For use with 312HMC 412HMC 422LMC and 423LMC
Kit contains 15ft of cable

50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

18-gauge
20 ft extended
Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
Also called Reel cord

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

71-B240

LiftMaster Interior Mount Brake Assembly 230-460V

Assembly includes: Brake Hub Kit Brake Release Lever Brake Disk Spring Cup Studs Compression Springs Brake Solenoid Solenoid Cover Spacers Mounting Plate Pressure Plate Feather Key Conduit.
Works on LiftMaster trolley garage door openers

Instruction Manual

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

19-50ML

Master Link #50

For #50 chain
ANSI Standard Carbon Steel

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

Illuminated keypad
Weather shutter protects keypad from elements
1 to 6 digit codes for maximum security
Allows for access without remote or keys
Compatible with Lynx residential openers built from 2000+
Mounting screws and 9V battery included

.......more details

Compatibility chart

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

SOLENOID004

Manaras 575V Brake Solenoid

Same as 22-575
Fits on all 575V garage door or gate operator brake system.

RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

Open/Close/Stop remote for 1 door
Operates single door: O/C/S configuration
LED indicator CR2032 battery and visor clip included
Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

7145.96

Whiting Bottom Seal For Coldsaver 96" long

Aluminum retainer sold separately

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

600BH

6" Heavy Brush Insert 8ft Long

Polypropylene bristles

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

5" yellow vinyl insert 150ft spool.

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 107" Fits door sizes: Up to 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

Z9900

Leaf Bumper Spring with bracket Sold as a Pair

Leaf spring with bracket and safety strap.

.363_3-3/4"-LH

Torsion Spring .363 x 3-3/4" x 12ft LH Green/White

Wire size: .363
Inside diameter: 3-3/4"
Length: 12 ft

T3B-OCS

Lynx 3-btn O/C/S Transmitter 303 MHz

Ultra secure mid-size transmitter does not have dip switches.
3 button (Open/Close/Stop)
Can be mounted on visor with saddle clip or carried on a keychain
Must be used with Lynx OCS receiver for o/c/s functions
Visor clip and 12V battery included

Compatibility chart

CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

MOD050

Manaras Friction Clutch Mod. #50 Chain Gear Head Operators

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to OGH and MGH operators

.......more details

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

GH105-L5

LiftMaster Gearhead with Brake 1 HP 575V 3-Phase Logic 5

GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

387LMC

LiftMaster Universal Wireless Keyless Entry

Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
Wireless – powered by one 9V battery (included)
Weatherproof slide-up protective cover
Open or close the garage door without using a remote
Backlit keypad

.......more details

Programming Instructions Instructions de programmation Sell Sheet

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

WHITING-ST

Whiting Strap Mounted Inside Door Option

This is an add-on option when ordering a Whiting door

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (1) set enough for one edge
p/n 1804-1463

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

Ratio 3:1
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Pull load hand chain: 35 lb max

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

Retro-Reflective photo cell

LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

CSA approved
Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams

.......more details

Technical information

VBELT_4L270

VBelt 1/2" x 27" (4L270)

V-Belt not cogged

210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

5 complete curtainlok's with fasteners
Curtain Lok™ for 1/4” thick Rubber Doors

202-0022

TNR Composite Bottom Bar Arm for HDXL

PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
Applications: rolling doors sectional doors and mass transit.
Electrical configuration: 3-wire SPDT
Temperature range: -20F to 158F
Max pressure: 20 PSI

.......more details

RESET-12A-32V

Doorlec Reset 12A 32V

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

PPLK1PH-100

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 100 pack

.......more details

210135

Skylink Chain for 7ft Door

Replacement chain for chain rail

106141

Marantec Shaft Adapter

17350

Doorlec Cable 5ft with Antenna

1209

Whiting Roller Hinge Complete

E/1929/235

Automatic Systems Axis 1.5" Ass'y w Bearings(BL229)

Used on the BL229 gate op.
Main pivoting shaft

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

TRANSF112

Manaras Transformer 575V-24V-50VA

K75-37549

LiftMaster Disconnect Kit for SL595U

Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
Allows manual operation of your gate operator

328-729

Lip Shock Absorber Dock Leveler

RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

ME-00009

Micanan Trolley Track Spreader Bar Assembly 1 Unit Only

3/4" x 5.79" long
2 are included when bought in the kit #MX-00119

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

3500

Whiting Beverage Align Roller 1" Screw Type

A Whiting original

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

.......more details

Operating Instructions

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

LA412XL20W

LiftMaster Single Arm Solar Package for LA412DC XL Gate Operator UL325 ***Includes (1x) K94-37236 Solar Harness (1x) SP20W12V Solar Panel (1x) LMRRUL Photo Eye (1x) A12330SGLPK Battery (12V) (1x) LA412DC Actuator Arm (1x) XLSOLARCONTUL Control Box

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio.
Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications.
Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs.
Includes: Single arm control box solar harness kit solar panel kit 12V 20W LMRRU photoeye and battery 12V 33 Ah.
Item codes: XLSOLARCONTUL SP20W12V LMRRUL LA412DC K94-37236 A12330SGLPK

.......more details

111075.0001

Overhead Door Poly VBelt for RSX RMX Jackshaft

Serpentine belt for Rolling Steel Door
Fits Genie GCL-T Trolley operator
Overhead Jackshaft models: RSX RMX

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-APT-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

G50402

LiftMaster Timer Defeat Hold Open Switch 50-12860

Allows for the auto-close timer to be manually disabled

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long

Reinforcement bar 2-1/4"
20G

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range)

Model Q45AD9LV same as part # 37620
Range: 9 m; Input: 5-15V dc
Output: NAMUR
2 m (6.5 ft) cable
Nema rating: NEMA 6P
DOES NOT include the bracket or the reflector. Use MV00482 for the kit

.......more details

BOLT016

Manaras Hex Bolt 1/4-20 x 4

KPR2000

LiftMaster Wired Keypad and Proximity Reader

The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
Supports HID 26 and 30-bit Wiegand proximity card formats.
Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
Latch Mode allows you to hold open a door or gate for an extended period of time.
Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.

.......more details

Installation instructions Manuel d'installation Sell sheet Brochure Wiring instructions Instructions de cablage

CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor

Same as CP-CAP-COM-450-540
Motor start capacitor

CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

Same as Garaga CF101

5001-14-DK-BROWN

Residential Side & Top Weather-Strip 14' Long Commercial Brown

PVC wrapped
Painted aluminum retainer
Dual fin vinyl

WE684

Omni Electric Motor TEFC 1HP 208V – 460V 3PH D56C

C-Flange

37222R

Genie Series III Deluxe Wall Console

3 function wall console for use with IntelliG™ and TriloG™ openers.
Same as GBWC-BX
3 function console operates door opener controls lights and security lock out switch.
Not compatible with Series II

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

MG1300

LiftMaster Maglock 12/24 VDC 1300 LB Strength

1300 pounds holding force
Equipped with an attached welding bracket and junction box with knockouts on four sides for fast and easy setup
Steel armature and mounting plates
Designed for minimum 1.5' gate frame
Outdoor face and side plate mounting
12 or 24 VDC power

.......more details

BT501L5

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Operator with a Brake Logic 5 ***No Longer Available

Low profile trolley operator with brake installed
Comes with #48 roller chain

Installation manual Manuel d'installation Sell sheet Brochure

60-7252

Wheel Chock Wall Bracket 14"w x 8"h x 4-1/2"d Painted Grey

Wall bracket only
4-1/2" projection

24-230-5

Relay 3 PDT 230V 7A

208/230VAC relay
Used in BG770 gate operators

RSH-6114-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Right Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

Installation manual Sell sheet

KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
Zinc-alloy metal front cover for tough environments

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure Compatibility chart

CPS3CARD

LiftMaster Option Card Only (41K0811)

Works with all commercial Logic versions L2 L3 L4 L5
Use with CPS-U to add a second set of eyes to the operator
Allows activation of Timer-To-Close without CPS-U
Simply plugs into Logic board
Cut resistors on JU1 & R16 to activate timer feature
Same as 041K0811

.......more details

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details