Devanco Canada - Get The Right Garage Door Opener‎ and Parts

903ADJORBX

Operator Reinforced Bracket 18-24" Adjustable Zinc Plated No Hinge

Also known as ARB Brackets

3-42-2B

Bottom Bracket with Removable Roller Carrier Commercial 2" & 3" 2-Hole BB-6 Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

Sold as a pair (1-left and 1-right)
13-guage
Dimensions: 4-9/16" W x 11" H
For 1-3/4" door

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters

.......more details

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

233817

Operator Reinforced Bracket 18-24" Adjustable with Hinge Kit Galvanized

Also known as ARB or ORB brackets
Kit includes: 5/16" Clevis Pin Hitch Pin 1/4-20x5/8" Carriage Bolt 1/4-20 Serrated Flange Nut
Hinge : Male Hinge 13 GA WIDE SD (MATERIAL STEEL 13 GA)

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

3-34-1

Low Headroom Quick Turn Top Bracket - Set of 2

Allows the top door panel to turn quicker saving you 2"- 4" more space. Also allows vertical tracks to be cut down up to 2" allowing more room above springs for operator installation in extreme low headroom situation
Sold as a set of 2 brackets
Requires 2 rollers per bracket - rollers sold seperately.
For residential garage doors.
Use with 12" & 15" curve 2" track

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

BK024/PR

Commercial 2" LHR Bottom Brackets Sold as a Pair (L & R)

Sold as a pair (includes one left and one right hand)
Same as BB-5 LHR Reinforced

BTM-BK-PCG/PR

Powdercoated Commercial 3" LHR Bottom Brackets Grey Sold as a Pair (L & R)

EZ123 UPWARDOR
Powdercoated grey
Use with: 3" straight track
Sold as a pair (includes one left and one right).

BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

Same as BB-6-3 reinforced c/w cotter and clevis pins
Use with: 3" straight track
Sold as a pair (includes one left and one right).

TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

Custom order to customer's needs
Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door

TRACKS-SET-3

3" Tracks Set with Wall Brackets *** By Quote Only

Custom order to customer's needs

CR-2154

Raynor Replacement Photocells *** Discontinued

The original PEC-R3 Sensors manufactured by Raynor are no longer available.
The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
Includes both the Emitter and Receiver sensors
Includes new sensor mounting brackets. Wires are not included.
These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
The new CR-2154 Sensors require new mounting brackets (included) to be installed

.......more details

GDI-TLG51

GDI Trolley Kit Add-On Feature

This is an add-on feature to the JDMG operator
Includes: Trolley brackets traveller idlers arms

TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

Drawing


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login