Devanco Canada - Get The Right Garage Door Opener‎ and Parts

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

SPDT

CPS3-N4

LiftMaster Option Card with CPS-UN4 Eyes for applications requiring 2 sets of photocells

For applications requiring two sets of photoeyes in a damp location
Range up to 45ft water dust and corrosion proof eyes (Nema 4x rating)
Works with Logic 3 4 5 Commercial Operators
Includes Durable steel brackets - floor or track mounting
Kit Inludes one set of CPS-UN4 and one CPS3 card ( CPSIII )

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

Used on old MJH

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

4690-040

Plate Mount Isolator

Vibration and noise isolator
Failsafe design prevents the bolt from falling should the rubber break
Reduces noise transfer from opener to building
Universal design allows for easy installation
Accepts 3/8” bolt

Specifications

CH900

Contact Cleaner 340g

Powerfull multi purpose contact cleaner and degreaser
Able to penetrate difficult to reach areas.
Cleans carbon deposits.
Removes dirt grease and other contaminants.
Safe on most painted and plated surfaces.
Suitable for contacts drivesmotors controls breakers switches telephones etc.

.......more details

Safety data sheet Fiche de données de sécurité

H12G11-SS

Hinge #11 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

For 3/4 & 1 HP trolley operators

124844

1" Nylon Bushing

MD-00034

Micanan Connecting Link #410

60-2728

AB 42GRU-9001 Retro-Reflective Photocell Exterior

Voltage: 12VDC/24VAC/DC
Sensing Distance: 30 Feet
Comes with Bracket and Reflector
NEMA 3 4 4X 6P 12 & 13
Allen Bradley

Z9205

Door Scale Arm

Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
Set door on shaft and multiply scale reading times 5 to give you the door weight
Bathroom scale not included

Drawing

118798

Marantec Trolley Assembly (Slider)

Replaces #8030177 and #803178
Replacement trolley assembly for chain & belt rail assemblies
Fits Marantec opener models: M4500M4500eM4700M4700eQ7500Q7700
Works for 7' 8' & 10' high doors (red pull cord rope can be adjusted to length accordingly)
Note: will not work for the Heavy Duty (2mm-14ga.) rail assembly
Same part number as 91570

.......more details

BOARD070MR

Manaras Replacement Control Board (Monitoring)

On-board 390MHz radio receiver accepts 50 remote controls

Replacement Chart Guide de remplacement

J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you

Installation manual Manuel d'installation Sell sheet Brochure

GD-LITE-1224134

Lynx Thermo Window 12" x 24" x 1-3/4"

DXT-21

Linear 2-Btn 1-Channel Handheld Transmitter 315 MHz *** Discontinued

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

Installation Manual

DXT-42

Linear 2-Btn 3-Channel Key Ring Transmitter *** Discontinued

Battery powered portable miniature transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a transmitter button sends a digitally coded wireless signal to its companion receiver. The transmitter buttons have a positive click feel.
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required. Transmitters can send a signal for up to 10 seconds with each button activation.
Each button sends a unique code. Pressing both buttons together sends code three. Press button(s) for a minimum of two seconds to insure receiver activation.

.......more details

Installation Manual

MA001

LiftMaster MA & MAT Control Board (K79-60166)

Electronic board for barrier gate operator
Same as K79-60166
Can be used in various Autogate Operators

YSG115-LED

Devanco Stop and Go Light Yellow Housing 115V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
Made in Canada

.......more details

Installation Instructions Instructions d'installation Sell Sheet

SL532COP

Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST532COP

BK303

Jamb bracket J-03 #3 12 gauge

Sold by the piece
Height 2.75" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

OSH-6534-ECB

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

OPJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect Circuit Board

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

Installation Manual Sell Sheet

BRACKET112

Manaras Wall Mount Stud Bracket

This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
Will not work will Trolley Operators

37301R

Genie C-Channel Chain Extension Kit

The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

Self-Contained Keypad System for Door and Gated Entrances
500 Code capacity
Grained stainless steel Surface Mount
Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
Same as SN7000255
Sentex Keypad

.......more details

Installation Instructions Programming Instructions Sell sheet

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

TLS1CARD

LiftMaster Option Board for L4 L5

Works in conjunction with Logic 4 & Logic 5 to provide seven field-selectable modifications
Including six door traffic control options
A means to connect External Open & Close limits by using a selectable DIP switch
Controls both 24V & 110V traffic lights
Formally known as RDGRNCARD

Installation Manual

SG10-24RG-LED

TriLite Stop & Go Traffic Signal 24V LED Yellow Housing

Red and Green LED traffic light
Approx. size: 11-1/2" High x 6-1/2" Wide x 4" Deep
24 volt DC input voltage only
Long lasting low power consumption
A simple reliable and cost-effective way to reduce accidents around the loading dock.
Available in two colors: safety yellow or black.

.......more details

Installation Instructions Instructions d'installation Wiring Diagram Schéma de connexion

PED42

Pedestal Post 42" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with 6 in. center radius giving a tight professional look
Same as G559

M8-705

Marantec Photoeyes 69190 / 97246

Works on all Marantec units
Includes brackets hardware and wiring
Same as item #86850 97246 used to be M4-705

Installation instructions

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

I-Beam chain rail for 3595 & ATS
Space required: 2" above heighest point of travel of the door

109020

Linear 1-Channel Multi-Code Receiver 300 MHz

Three tabs for universal mounting
One "NO" relay
Compatible with 10 dip- swith 300 MHz Multi-code transmitters
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

HD-15

Reflector Hood for 3" Round Reflector

Black/Charcoal

41DJ002

LiftMaster Circuit Board with Plate for 8500

Board: Security+ 2.0 for DC Jackshaft Model 8500
5 year warranty

1702LMC

LiftMaster Quick Release Lock

For all vault-type garages
For exterior manual operation
6ft industrial-strength connecting cable
Non-corrosive stainless steel faceplate and spur washer
Extension sleeve for doors up to 2" thick
Positive connection between cable and trolley release

.......more details

1702LMC Manual

NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

Watertight packaging
Detection range: 30 feet
6 foot cord
Reflector Bracket and mounting hardware Included
2 LED indicators
Sensitivity adjustment

.......more details

Installation Manual Sell Sheet

823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

Controls lights remotely
Turn on lights in your garage yard or home with your garage door opener remote control
Use with LiftMaster Internet Gateway to control lights from smartphone or computer
Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology

Installation Manual Manuel d'Installation

STRIP_CURTAIN

Complete PVC Strip Curtains Made to Order

Please call us for price and delivery we can supply complete doors and replacement PVC strips for existing installations. Many different sizes and colors are available

K001A6837

LiftMaster Replacement Logic 4 Circuit Board L4

iftMaster replacement logic board (L4) kit for Commercial operators L4 board is UL325 compliant & requires CSPU photoeyes for momentary contact operation
Works with LiftMaster operators of all voltages and HP
Maintenance Alert System (MAS)
Open Mid Stop feature
Timer-to-close mode
Car dealer mode

.......more details

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

This single channel miniature transmitter controls one door.
It has a nine switches encoder with three positions: + 0 and -.
Manufacturer's model number: 9931MT (190-109301)
Dimensions: 1 3/8'' x 2 3/4'' x 1/2''

22-240

Brake Solenoid 230-240V

Used on all brands of commercial door and gate operators
2 wire connection

LIMIT025

Manaras Single Snap-Action Limit Switch with Flat Lever

Replacement for LIMIT001
For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

STATION079

Manaras 3-btn Push-Button Control Station with Key Lock-Out Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

Connection instructions

HAE00018

Linear Inner Slide Assembly - Chain (HCT)

For LSO50 LDO33 & LDO50

300BH

3" Heavy Brush Insert 8ft Long

Polypropylene bristles
Same as model MS1712

1005-2-16'

Aluminum Bottom Retainer U-Shaped 16' Long***Actual Length 16'2"***

For door thickness 2"

DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
8-dip switch 64 selectable codes
Same as: DNT00027B or DT4A
310 MHz frequency

Programming Instructions

371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.

371LMC Manual

HSC-600

Hand Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Tool length is 25-1/2"
Wire rope cutting capacity 3/16”
Made in Japan

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

24-RWB-PAIR

Winding Bars Round 24" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

25-42-110

Extension Spring 7' Door - 110 lbs White

Double - Loop
25" long 42" stretch 110 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

Z9900

Leaf Bumper Spring with bracket Sold as a Pair

Leaf spring with bracket and safety strap.

CADROLL

3" Stainless Steel Carwash Roller 7" Stem ** To Extent of Inventory

Stainless Steel Shaft no bearing design
Roller made from NMW plastic which is more wear resistant that steel because it causes less friction
Rated for 200 000 cycles
Pound Load: 145 lbs

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing
Operating temperature: -40F to 140F

.......more details

Installation manual Sell sheet

RBH751L5-LH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

Installation Manual Manuel d'Installation Sell sheet

M3A

Safety Inertia Brake 1" Bore 2283 Torque PCM3AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 1" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

K75-37549

LiftMaster Disconnect Kit for SL595U

Compatible with LiftMaster SL595UL heavy-duty vehicular slide gate operators
Allows manual operation of your gate operator

AMB-3002

Ambassador 3002 1-Channel Receiver ***Replaced by DR & DT

Works with Ambassador remotes
Can use Allstar 313 MHz R-MVP3W or R-MVPC

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

LJ8950W

LiftMaster Light Duty Commercial Jackshaft Op. for Rolling Doors

Ideal for smaller/lighter commercial doors with light duty cycle requirements
MyQ Technology Built-In Wi-Fi Real-Time Alerts
Smooth Start/Stop
Optional Accesories 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
Powerful Add-Ons 811LM and KPW5/KPW250

RA-LYNX-RCVR

Lynx External Receiver

Add to most operator systems
Use with either residential or commercial applications
Unlimited transmitter capacity

Programming instructions Compatibility chart

SETR2641AM2K

Erone 2-Channel Mini Transmitter Black 433MHz

Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

Z9202

E-Z Ratch Kit Torsion Spring Winding System ** No Longer Available

Kit includes:
Two (2) - 21" Extendable Ratchet Handles (extend to a full 30" in length)
All-purpose commercial cone Gear Adapter (double-ended)
Six (6) Cone Adapter Pins One (1) 7/16" One (1) 1/2" Two (2) 5/8" Two (2) 3/4"
Mounting arm spacing allows it to be coupled to spring cone sizes up to 4 3/4" diameter
Compatible with 1” main torsion bar installations

.......more details

Operating instructions

GH-343-2

Doorlec Industrial Jackshaft Door Operator 2 HP 460V 3-Phase

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

TDC1222-14

Liftmaster Commercial 14FT Trolley Angle set (10-5814-P) and #41 chain pack (TDC41-14) ***Actual length 203"***

Double Angle Rails for doors up to 14'6" high
Includes #41 chain pack

BEA-10EAGLE-ARTEK

BEA Eagle Compact Motion Sensor 6'-13' Mounting Height

EAGLE ARTEK is a motion sensor for all types of automatic doors. Its slim and compact design ensures discreet integration for your application.
Superior field performance with improved filters that help to reduce false detections
Easy to install and set up with flexible parameters and simple push-button settings
Max. detection range: wide: 13’ × 6.5’ narrow : 6.5’ × 7’ (@ 7’ high)
Temperature range: -4 – 131 °F (-20 – 55 °C)
Cable length: 8’

.......more details

Installation manual Spec sheet

41DJ003MC

LiftMaster Receiver Logic Board DC WiFi RJO

Security+ 2.0 Receiver Logic Board Replacement Kit
For use with various LiftMaster® and Chamberlain® DC Wi-Fi® Wall Mount Residential Jackshaft Garage Door Operators; powered by myQ® and manufactured 2023 to present
The unit will feature a yellow circle learn button

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

Blocks pests from entry
Fills in holes and gaps along garage door frame
Keeps insects mice and unwanted guests outdoors
Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
Made in the USA

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

BEA-10-IXIO-DT1

BEA Sliding Door Sensor

Dual technology motion and presence sensor combining microwave activation and infrared presence detection for the automatic sliding door industry.
This solution is highly flexible and user-friendly for sliding doors industrial doors vehicle gate detection and off-door automation.
Precise Presence Detection: Two 24-spot high-density infrared safety curtains providing precise presence detection
Easily Adjustable: Four visible red alignment spots are projected on the ground to assist in precise IR curtain adjustment
Standards Compliant: Fully monitored internally capable of external monitoring
Dimension 10 3⁄5“ (W) × 2 1/4” (H) × 2 1/4” (D)

.......more details

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

MP00228

Micanan Track and #41 Waterproof Chain for 14' h Door

41C4672

LiftMaster RPM Sensor Kit Screw Drive *** To Extent of Inventory

For use with various LiftMaster® and Chamberlain® Screw Drive Garage Door Openers
Same as 041C4672

SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)

INSL24UL

LiftMaster Industrial Variable Speed Slide Gate Operator with battery back-up

For Industrial Slide Gates up to 2200 lbs.
Variable cycle speed is adjustable from .5 ft./sec. to 1 ft./sec.
Industrial brushless DC motor with battery back-up
Continuous-duty gate operation built with industrial oil-bath gear box
Enclosure Lockable Weatherproof 14g NEMA 3R Steel Cabinet
Smooth start/stop operation and mid-travel reversal extend operator hardware life.

.......more details

Installation-manual manuel-Installation Product guide Guide de produit Retrofit guide Guide d'installation

50-CP4

LiftMaster Sensing Probe Free Exit 100ft Lead

Self-contained free exit system designed to detect moving vehicle and open your automatic gate.
Can be installed above or below ground
Connects directly to any gate operator without an external output board.
Works with powered or solar gates.
SPECIFICATIONS: Cable Lead Length: 100 ft.
Power Requirements: 8-24 VAC oe 8-30 CSX

.......more details

2705.187_30

Whiting Curbside Torsion Spring.187 wire 2-3/16" ID 30" Long

Torsion spring wire only
.187 wire size

TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

Suitable for applications up to 55 feet wide and 35 feet high
Self-supporting channel steel C10 & flatbar mounting assembly
Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
Frame mounted thru-beam photoelectric sensor
High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
Door speed of up to 12 inches per second

.......more details

10RD433

BEA Digital Receiver 433 MHz

Integral sequencing "learn" buttons (for vestibule sequencing)
Pulse/toggle functionality
Additional hold time
12-24V AC/DC
Max No. of Programmed Units Per Receiver: 100 Transmitters
Dimensions: 2 3/4" x 2 1/8" x 1"

.......more details

CELLOPENER-365

EMX GSM Access Control & 365 Day Timer 2000 Users EMX-5431-1

Up to 2000 Programable Users
Weekly & 365 Day timer
AutoAdjust for Day Light Savings Time
Remote Programming From Anywhere in the World
GSM SIM Card Included
Cell Phone SMS Activation Required

.......more details

LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

Lead probe ONLY. Requires the LRS-C1 detector
Three-dimensional presence detection of vehicles
Select X Y Z axis independently
Stand-alone sensor
Sensor stores ambient background and settings in non-volatile memory
Includes direct burial sensor and 100 ft of lead wire

.......more details

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

GH-311-3/4

Doorlec Industrial Gearhead Door Operator 3/4 HP 115V 1-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details