Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

5001-9-DK-BROWN

Residential Side & Top Weather-Strip 9' Long Commercial Brown

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
SBX-N4-P-0000-FD

Micanan Control Box Eurodrive Limit Box

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
MU22-CUSTOM

Miller Edge MU22 Custom Made Edge

  • Edge made to customer's exact specifications
PRO-HHD-5011E-R

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Right Hand

  • 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
  • .......more details
PPLK1PH-10

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0â„¢ Gate Operators
  • Keychain remote control sold in a 10 pack
  • .......more details
MK00710

Micanan Varistor Harness 575V with White Wires

MK00711

Micanan Varistor Harness 380V with Yellow Wires

MX00203

Micanan Complete Control Box Only for PRO-HHDU/TU Nema 1 110V

WINDOW-SP.ORDR

Special Order Window

  • Made to customers specific requirements
785105

FAAC XP30 Photocells 30m Range Relay

  • Hardwired pair of Photocell relays
  • 30m Range
  • IP54
  • 24v
  • Dimensions: 55 L x 78 H x21 D mm
MOUNTSHAFT012

Manaras Clutch Shaft Kit for MSJ

MP-00008

Micanan Two-Door Interlock Modification

  • Only allows one door to be opened at one time
MP00088

Micanan Track and #41 Chain for 8' h Door *Actual length 126"*

  • For 3/4 & 1 HP Micanan trolley operators
MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

  • For 3/4 & 1 HP Micanan trolley operators
PRO-TB-7583-U

Micanan 3/4HP 208V 3 P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
C-24-12-2-W

Thermal Window 24" x 12" for 2" Door White

  • For 2" thick door
PRO-H-5011R-LH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
PRO-H-5011R-RH

Micanan 1/2HP 115V 1P Hoist Operator Contactor Model Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Solenoid brake OPTIONAL
26253

Doorlec Shaft 9-3/4" x 5/8" Keyed LJ / LJH

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

  • Stops ONLY
  • Sleeves sold separately part # SL14COP
MT22-BLACK-U

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Universal Outlet

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
TMQ-GRG826-80:1

Grove Gear Gearbox Current Model 80:1 Ratio Assembly D 56C

GAL.250-134-33R

Galvanized Torsion Spring .250 x 1-3/4" x 33" RH with Cones

  • Made to order
MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Solenoid brake OPTIONAL
  • Non-monitored board NO photoeyes
PRO-HHD-7511E-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
  • .......more details
LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
41A2780

LiftMaster Chain Pulley Bracket Kit

  • Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
  • Compatible with ATS 2595 3595 models
CP-SP-DISCONNEC

Lynx Hoist Spring MCJH CP-SP-DISCONNECT

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRECUT-GALV

Special Order Pre-Cut Galvanized Spring Made to Order

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

  • Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
  • 24VAC/VDC
  • 10' Long
K76-34740

LiftMaster Limit Passpoint Kit

  • Kit Includes: Learn Limit Switch Learn Limit Nut Limit Shaft Assembly Sprocket and Wire Harness
  • For RSL12V RSL12VH
  • Aslo called Learn Limit Assembly Kit
PP12X34.5

Base Plate 12" x 34 1/2"

  • 12"x34.5" Base Plate Stainless Steel
98EO626

Panic Bar for Pedestrian Door- Exit Only

  • Panic Bar for exit only
ME00001

Micanan Limit Shaft 3/8-1/2 x 9.75"

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

  • Dual sprocket assembly for 3/4 HP chain drive operators.
  • Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
  • For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S
R4257

Linear Power Supply

  • For SW100 and SL100 gate operators
39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

  • Usable length is measured between the shoulder and the cotter pin
LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1†diameter.
  • .......more details
MK00188

Micanan Auxiliary Contact Block

5001-14-BLACK

Residential Side & Top Weather-Strip 14' Long - Black

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

  • Reinforcement bar 3"
GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

1058050002

Overhead Limit Cam Snap On for OHD Chain Model

  • For Overhead models #456 #551 #556 and the #65 series
  • Also called Limit Actuator
  • 105805-0002
R5221

Sheave Strap 4"

  • Sheave strap also known as fork only
26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
65-32449

LiftMaster Thermostat Control Heater 115V & 575V Fin Type ** Discontinued

  • Designed to automatically maintain a suitable temperature inside a control enclosure down to -40 degrees F.
  • Uses a high surface area aluminum heat emitter to eliminate the need for a fan
  • Provides low-radiation and high-convection heating in the enclosure
  • Adjustable from 30 degrees to 120 degrees F. (0 to 50 degrees C.) 208V - 460V
  • Compatible with operators SL575 SL585 and SL595
TILT-5

Tilt Detector

  • State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
  • Safeguards against rolling steel door failure where conventional devices miss
  • Automatically stops the operator to keep door within safe parameters
7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
K002B0821-1

LiftMaster Transformer for EL1SS and EL25

  • 120 volt input power plugs into a standard outlet
  • 16VDC output 2.5 amps
K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

1104-18'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 18' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-12'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 8' Long - Light Bronze (F)

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
K12-8034

LiftMaster Female Rod End LH

  • Upper rod end for BG770 BG790
  • Same as part # 12-8034
07-8058

LiftMaster Crank Link BG790

TRANSF037

Manaras Transformer 240/208-24VAC 40VA

  • Transformer 240-208V Primary 24VAC Secondary 40VA
783

Fasteners Hex Head Bolt Gr 5 3/8-16 x 1-3/4" 650/Box

  • 3/8" bolt has 9/16" head
  • Max torque = 22
  • Full thread
  • Grade 5
41D8181

LiftMaster Cover

.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

  • Spring wire only. Cones and Filler extra
5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

  • PVC wrapped
  • Painted aluminum retainer
  • Dual fin vinyl
  • Painted screws to match. 1 screw per foot
  • Sold by full case quantity (20)
1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-7FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 7' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
COUPLING019

Manaras Manual Hoist Coupling

  • For Opera-SH
ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Built-in 26-bit Wiegand proximity tag
  • Eliminates need for separate proximity card or tags and transmitter
  • Supplied with quick-disconnect key ring
  • Same facility and ID codes for transmitter and proximity tag
  • Sold in lots of 10
  • .......more details
27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

  • Replacement electric motor for VSL gate op.
VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

  • Variable Frequency Drive modification for commercial operators
  • Whenever the primary power is 575V must add MX00164 panel
27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
  • Winding cone color: White
12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

  • Fits model LJ / LJH
2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

  • Used on old MJH
E5761-A27

Automatic Systems Arm Shaft Assembly for BL27

  • French description: Ensemble Axe de Lisse
  • For model BL27 gate operator
28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
80-2103

LiftMaster Tinnerman Nut **DISCONTINUED

  • Black Plastic Knob
  • Formerly 802103 G802103
  • For SW470 with GL or S3 Board
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
9372263800

Square Torsion Spring .375 x 6 x 38" with Cones LHW 1-1/4" Bore

1003-4-DF-200FT

Bottom U-Rubber 4" Dual Fin Black 200' Long

  • 200ft spool of vinyl insert.
  • Dual fin
20109

Doorlec Hoist Spring EHJ

MD-00031

Roller Chain #40 Nickel Plated Sold by the Foot

.437-6-R

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
CONTACTOR041

Reversing Contactor 1 Ph-9A-24VAC

17-10363

LiftMaster Pulley 1-5/8" OD 1/2"B 4L Belt

19-5118-NP

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door Nickel Plated

  • For 3/4 & 1 HP trolley operators
MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
MU22-2WIRE-E-Y

Miller Edge MU22 2-Wire End Yellow - Sold per Foot

  • €¢Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
MGS20-B-2U-05

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 5ft Long

  • €¢Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
9291644400

Galvanized Torsion Spring .306 x 3-3/4 x 44" L with Cones LHW