Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Accessories
OWL

EMX Microwave Motion & Infrared Presence Sensor

  • The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
  • Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
  • Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
  • Supply Voltage: 12-24 VDC/AC
  • Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
  • Connections: 32 ft (10 m) 8 conductor cable directly from sensor
  • Environmental Rating: IP65
  • Vertical Directionality: 16-32º wall or ceiling mount
  • Horizontal Directionality: +/- 10º
  • Microwave Detection Range: Depends on sensor height and housing angle Max. Range: 23 ft (7 m) Max. Width: 19.7 ft (6 m)
  • Infrared Detection Range: Depends on sensor height and housing angle Max. Range: 18 ft (5.5 m) Max. Width: 26.2 ft (8 m)
21-35057

LiftMaster Transformer 460V 24VAC 40VA

  • 575V PRIMARY 24V SECONDARY
  • Same as K21-35057
821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

  • This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
  • This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
  • Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
  • Also known as: 821LM-SENSOR 041D7924-1
MAW123-YEL-RH

Miller Edge Air-Wave Edge Yellow Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
MO00006

Micanan Gearhead Disconnect Spring

  • Dimensions: 0.92ID x 0.09G x 2.00"L
K13-36117-1

LiftMaster Cludge Cover for RSW CSW

  • Protects cludge assembly
  • Hard cover sloped front beveled edges
  • Compatible with LiftMaster RSW12UL CSW24UL
041-0042

LiftMaster Wiring Harness Camera

  • Replacement wiring harness kit compatible with 85503 & 85503-267
041-0037

LiftMaster Cover for 85503

  • Replacement Cover.
  • Compatible with LiftMaster® Models 85503 & 85503-267 DC Battery Backup Belt Drive WiFi® Garage Door Openers; featuring myQ® technology and Secure View™ Video Camera.
H3NA12

Richards-Wilcox Hinge 3NA x 12 Gauge Roller Bracket

  • Galvanized 12 gauge hinge
BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

  • Includes 1 left and 1 right hand bracket
  • BB-4 SF
4580-304-BRONZE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Bronze (Commercial Brown) 458-47

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
SR-9004-BLACK

Elton Reverse Angle Clip-On Vinyl Black 200ft Roll

  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
CC-007

Skylink Chain & Cable Assembly for 7ft Door EQ Model Ops

  • Replacement chain & cable for rail
236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
K72-12564

LiftMaster Output Shaft Kit H Prior to 2005

  • Also known as: 308116010 308116010HK
K18-10931

LiftMaster Compression Spring

  • Also known as: 187009 G187009 1810931 18-10931 18-7009
E/1929/072

Automatic Systems Round Arm Ass'y 18" (BL229)

  • Used on the BL229 gate op.
SHAFT104

Manaras Clutch (Input) Shaft for Opera H

MC00001

Micanan Gear Reducer 45:1 (1/2 3/4 & 1HP)

  • For PRO-GH
MO00034

Micanan Brake Compression Spring (5/16" ID)

050DCTBF

LiftMaster Receiver Logic Board Kit DC WiFi Bluetooth Enabled

  • 050DCTB is a Bluetooth Enabled Receiver Logic Board Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® WiFi® DC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
  • The unit will feature a yellow learn button.
  • Replaces 050DCTWF
  • Backwards compatible with 050DCTWF
  • Board: Tri-band Security+ 2.0l
    • .......more details
GTO-R550

Nortek Replacement Swing Gate Control Board

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
MODKIT027B1

Manaras Universal Aux. Output Module B070 Field Install

  • MODKIT027B1 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD070
  • Order MOD027B1 when ordered in conjunction with a commercial operator
K75-12585

LiftMaster Complete Brake Assembly GH 230V

  • Complete assembly includes: Brake hub kit Brake release lever Brake disk Spring cup Studs Compression springs Brake solenoid Solenoid cover Spacers Mounting plate Pressure plate Feather key and Fastener.
  • Also known as: 3059004230
TRACK-2"-RAW-8

Raw Vertical Track 2" 8'-0" Sold per Piece

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

  • For use with various LiftMaster® Commercial Door Operators
.187_2"-RH

Torsion Spring .187 x 2" x 12ft RH

  • Wire size: .187
  • Inside diameter: 2"
  • Length: 12 ft
19-41HL-NP

Half (Offset) Link #41 Nickel Plated

  • For #41 chain
19-40HL-NP

Half (Offset) Link #40 Nickel Plated

  • For #40 chain
19-80ML-NP

Master Link #80 Nickel Plated

  • For #80 chain
19-60HL-NP

Half (Offset) Link #60 Nickel Plated

  • For #60 chain
BOARD003

Manaras Repl. Circuit Board MA-50 110V Lite Duty

  • Used on model MDTB
111396.0002

Overhead Brake Kit Model RSX 3/4-1HP 3PH

GH-321-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P Contactor Model (Hard Wired)

  • Custom-designed extra heavy-duty industrial-type electric door operator
  • Worm gear reducer 40:1 ratio
  • #60 roller chain and sprockets from operator shaft to door shaft.
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter
  • Rotary type limit switches
    • .......more details
41A5257-3

LiftMaster Hardware Kit *** No Longer Available

  • Hardware Replacement Kit. For use with various LiftMaster® Residential Garage Door Openers
MA020D

LiftMaster Door Kit Mega Arm Tower

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

  • 2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
  • Replaces BEARING012
MA006

LiftMaster Mega Arm Chassis

  • Sturdy aluminum construction
  • For LiftMaster MADCBBC MATDCBB MASTDCBB commercial parking gate operators
2200-306

Linear Clutch Spring HSLG

  • Used on various Linear Gate operators
MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

  • Miller Edge Monitored Edge Link II TRANSMITTER ONLY
  • Monitors the presence and function of any 10K (T2) monitored sensing edge
  • Provides a monitored wireless signal transmission from the sensor to the operator controls
  • Improved immunity to RF interference with 916 MHz operating frequency
  • Eliminates visible coil cords and retracting reels
  • Saves installation time
    • .......more details
2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

  • The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.
WA11

NICE Adjustable Stand for L & M BAR Gate Op

  • Adjustable stand for the barrier arms of the M-Bar & L-Bar barrier gate operators
  • Attaches to ground and provides support when arm is down
ETBHW-311-3/4HP

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

  • Trolley Industrial type operator with DC2000 Logic controller
  • Watertight/Dust tight
DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

  • Max Width: 12’
  • Max Height: 6’
  • 26-gauge galvanized steel
  • Manual lift operation
  • Slide bolt or curtain lock
CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

  • Complete brake kit with solenoid
10MS41-S

BEA Magic Switch Touchless Stainless Steel Single Gang***NLA Replaced by 10MS31U-B

  • BEA’s MAGIC SWITCH® Family provides a highly accessible and germ-free door activation without physical contact.
  • Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
  • Using microwave technology BEA’s MS41 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
  • Capable of detecting a moving hand cart or wheelchair.
  • Plus an adjustable hold time offers flexibility to meet ANSI standards.
  • The durable design suits sterile wash-down applications such as surgical wash-down clean room and pharmaceutical environments.
    • .......more details
3250

Deadbolt Diecast Case Lock Set w/2 Keys

  • Includes mounting hardware
  • Includes 2 regular keys (not Master keyed) Schlage keyway
  • For use on doors up to 2" thick
308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
76618

OHD Brake Pads Sold in Pairs

GHW-353-1HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1 HP 575V 3P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
EHJW-383-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 208V-3Ph

  • Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
  • With DC-2000 controller
  • Watertight and Dust Tight EEMAC Type 4/12
Q410

LiftMaster Surge Protector K70-51060

  • Most commonly used with LiftMaster® SL3000 & CSW200 Models.
OPH-6233-ECB-LH

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
K20-1075B-2TP

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph L5 TEFC

  • Electric motor
  • Also known as: 20-1075B-2TP K20-1075B2T
MOTOR009-WIRED

Manaras Electric Motor1/2HP 120/240V 1PH

  • Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
  • 1725 rpm built-in reset
  • Wired either 120V or 240V ECB
MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

Q104

LiftMaster Standard Arm Assembly CSW24U/RSW12U (75-50293)

  • Also known as: Q038 75-50293 K09-50104 Q040
2376.200.30.850

Whiting Torsion assembly .200 wire size 30" spring length 85" shaft

2376.206.325.900

Whiting Torsion assembly .206 wire size 32-1/2" spring length 90" shaft

33356A

Genie Opto-Luctor Wheel

MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
  • Adjustable spreader bar assembly included.
    • .......more details
HCT08

LiftMaster HCTDCU Rail Only for 7'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
.177-2-L

Cut-to-Length Torsion Spring .177 x 2" Left Hand Wound Gold

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
3BXLT-KA

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic Keyed Alike

  • Double pole contacts
  • Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
  • Comes with 2 keys keyed alike
  • H=7" W=2-3/4" D=2-3/4"
106-0005

Rodent Block Pull Chain Seal 2"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
106-0006

Rodent Block Pull Chain Seal 2.5"

  • Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
  • The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
  • Features solid cast aluminum construction easy to install and completely cover the chain opening.
  • The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.
OSH-6812-ECB

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
RDO-321-3/4

Doorlec RDO Rolling Curtain Op. w/ECB 3/4HP 230V 1PH

  • Additional charge for doors over 14' high
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
91-00401

Truck Door Step Bolt 1/4"-20 x 1.50" (3/4" head)

  • Zinc plated finish
  • Cross Reference: T #80015-1610
41A2818

LiftMaster Limit Switch Drive Gear Kit

  • For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
  • Complete replacement kit includes: helical gear e-clip and grease tube
PRO-R4918

Linear Magnetic Rev Counter PCB Assbly 3KXLS 4KXLS R4918

  • Linear Professional series
R5213

Bearing Flangette Retainer Only Standard

  • Does not include bearing
  • For use with all C16-32F and C20-32F
  • Steel Zinc plated finish
MB-01007

Micanan Electric Motor Only 1/2HP 220V 1PH

  • Limited duty motor
  • Used on Micanan's LT LJ LH LHA
3BXT-YELLOW

Replacement Button/Switch Only - Yellow

  • Replacement button for 3BXT
14-1056

PVC Roll 12" x .120" x 200ft Roll Low Temp Smooth for Replacement Strip Curtain

  • Clear and smooth. Suitable for most average applications.
  • Temperature Range: -34° C to 65° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
16-8001

LiftMaster Cogged Vbelt 4L 34"

  • This is a replacement Belt (4L340).
  • Compatible with LiftMaster® Model BG770 Barrier Gate Operators.
K77-36389

LiftMaster Hardware Kit LA500

SL595103UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl. UL325

  • UL 325 compliant system.
  • Power: 208/230/460/575 VAC. 3 Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
    • .......more details
.262_6"-RH

Torsion Spring .262 x 6" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 6"
  • Length: 12 ft
  • Special Order Minimum lead time 3 weeks
SL595151UL

LiftMaster Dual Voltage Slide Gate Op.1.5 HP 115/208/230V 1 Phase - Heater NOT Incl.

  • Power: 115/208/230 VAC. Single Phase.
  • Accessory power: 24VAC 500mA max.
  • Monitored safety inputs: 3 Main Board 3 Expansion Board.
  • Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
  • Gate travel speed: 12 in. per second.
  • Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).
    • .......more details
50324

Doorlec Drive Shaft Kit ETB-3

02-403N4-XALD

Push Button Control Station 3-Button Surface Mount NEMA 4/12 O/C/S Black Black Red

  • Open/Close/Stop allows complete control of the door.
  • Compatible with all commercial door operators.
  • NEMA 4 4X 12 13
  • Outdoor surface mount station with polycarbonate enclosure Part # XALD03H7
  • Dimensions: 2.0" x 5.27" x 2.68" (H x L x W)
K41-39254

LiftMaster Reflector and Bracket Kit

  • Commonly used to replace a lost or damaged reflector for LiftMaster® Monitored Photoelectric Sensors (LMRRUL).
  • Complete kit includes: (1) Bracket (1) Reflector (1) Reflector Cover and Assembly Hardware
  • Compatible with LiftMaster® LMRRUL Monitored Retro-Reflective Photoelectric Sensors
  • Reflector Dimensions with Hood: 2.6" x 4.72" x 2.0" (W x H x D)
  • Reflector MUST be mounted vertically; no horizontal mounting
GTO-R5211

Nortek Retrofit Replacement Control Board Green

  • Replaces the R4211 replacement control board
  • Retrofit board with upgraded firmware that is compliant with UL 325 Version 6
  • Color is green
  • Compatible with the Mighty Mule FM500 & FM502
  • Compatible with GTO PRO 2000XL GTO PRO 3000XL GTO PRO 4000XL
  • Compatible with the old GTO PRO 2000 GTO PRO 2500 GTO PRO 3000 GTO PRO 4000 Swing Gate Operators
    • .......more details
SPBAR001

NICE Bar Support Kit MBAR5

41D0277-2

LiftMaster Transformer WiFi Non-Battery Backup

  • For Wi-Fi models without BBU garage door openers; manufactured after 2011
  • Same as #204D0277-2
510.4228.07

Whiting Double End Hinges DF SS/Nylon - 7 Panel Door Add-On Option

  • Add-on option when ordering door.
ME113-C7

Miller Edge PVC Mounting Channel Flat Sold by the Foot

40659R

Genie Universal 4-Button Remote

  • Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
  • Easy to set up
  • Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme
OVIEW-IBT4

NICE Handheld Oview Display Programmer with IBT4 Interface Module OVIEW/A

  • Required for programming barrier gates
IBT4

NICE Interface Module

  • Required for use of Oview on the new Gen 2 MBAR models
  • Same as IBT-4N
15-10885

LiftMaster Dual Sprocket 48B10/41A24

  • Also known as: G1510855 156016 G156016 15-10885 15-6016 71156016
BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

  • Thru beam configuration
  • 90° adjustment left or right
  • The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
  • 50 ft. operating range
  • Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)
UNI-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Uniform Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
COMP-VILLERAY-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings positioned to create the Compact Villeray design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
SEIGN-TRAD-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Overlay moldings can be custom positioned to create the square or rectangle desired look - Moldings are factory white or can be painted to match door colour - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
NEW-HAMP-R16

Garex Ready to Install Special Order

  • R16 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration