Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bearings
26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Attaches to bottom panel for roller support
  • Shaft cover for 1 stud
  • Cross Reference: W #1021
6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X12PO50

Devanco Loop 4' x 12' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X6PO50

Devanco Loop 4' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
SAFEPACK-MOD

Doorlec Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

MK00488

Micanan Electronic Circuit Board Monitored

  • Replacement board for PRO-LH (50-11)
  • Board has terminals P1 & P2
  • Up to 20 transmitters can be programmed
Instructions Manual
210134

Skylink Pulley Assembly - Belt

  • Fits Skylink & Mastercraft 046-0266-0 belt model openers
45ACT

LiftMaster Circuit Board

  • Board: Tri-band Security+ 2.0
  • AC Belt and Chain Drive models
  • Fits models LC500EVC HD420EVC PD622EVC
  • Same as 41D7675 1D7675 7675 45ACBL1 45ACBL2 45ACBL3 45ACBL4 45ACBL5 45ACCL1 45ACCL2 45ACCL3 45ACCL4 45ACCL5 45ACBR1 45ACBR2 45ACBR3 45ACBR4 45ACBR5 45ACCR1 45ACCR2 45ACCR3 45ACCR4 45ACCR5 045ACT 041D7675
MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

OPJ-6432-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 480V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
E/1929/201

Automatic Systems Limit Switch Assembly

  • Used on the BL229 gate op.
E/BLOP/118

Automatic Systems Option Double Limit Switch

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

  • MODKIT027 for field install simply plugs into the control board
  • Controls several auxiliary devices such as Strobe horn fan lights etc
  • Works with BOARD060
  • Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.
E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

  • Length: 15" Width: 5.0MM (0.187")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
E14400M

Cable Tie KSPEC 40 LB Black 14" Nylon 1000/pkg

  • Length: 14" Width: 3.6MM (0.140")
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
  • Rounded edges provide added safety and eliminate insulation damage
    • .......more details
WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

S3HD-2

Coaxial Splitter 2-Way Female to Female Type F

  • A practical and efficient solution for dividing a signal from a coaxial source into two separate channels
  • Its careful design helps minimize signal losses thus ensuring optimal quality on each output
  • Frequency: 5 - 3000 MHz
  • Special order item price may vary depending on availability.
15-50B72QGH

Sprocket 72 Teeth 1-1/4" Bore 1/4" Keyway

  • For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators
OSH-6232-M-N1-RH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
GALV-306-334-144-L

Torsion Spring .306 x 3-3/4" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
59206

Todco Operator Bearing Shallow Header Roll Up Door

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

  • Does not include bearing
  • Steel Zinc plated finish
DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

  • Mini Storage door non insulated with exterior curtain lock
  • Custom ordered to exact size
MPB-3

Doorlec Open Mushroom Stop Lockable Close Push Button Station

  • Green (Open) Red (Mushroom Stop) Black (Close) push-button station
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

  • Blocks pests from entry
  • Fills in holes and gaps along garage door frame
  • Keeps insects mice and unwanted guests outdoors
  • Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
  • Made in the USA
K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

  • Inclueds (3) Master Links.
50-19503

LiftMaster Push to Open Bracket

  • Allows the gate to swing away from the property
  • To be used with LA400 and LA412 gate operators
Installation manual
SP10W12V

LiftMaster Solar Panel Kit 12V 10W

  • Includes: (1) 10 Watt 12 Volt solar panel
  • Mounting bracket
BEA-10-WBA

BEA Universal Mounting Bracket

  • Extendable from 15.35" - 23.62"
  • -90 to 90 degree tilt range
  • Self Drilling screws provided
  • Carbon Steel Black Powder Coated
SA1929/A51

Automatic Systems Board w/Battery Assy for BL229

E/BLOP/121

Automatic Systems Option 1 Kit 2 LED Lights on Arm

  • Increases visibility of the arm on BL229 gate operator
NO_HAR-11

EMX Detector Only No Wiring Harness Included

5001-12-BLACK

Residential Side & Top Weather-Strip 12' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
LAP

Linear External Antenna Kit LA-P AAE00366

  • Compatible with DVS-1200 DVS-2400 and DUAL-824 systems
  • Omni-directional external antenna
  • Antenna connector mounts inside case wire whip extends outside case
  • Compatible with EXA-1000 external antenna
  • Designed to enhance the radio range of Linear's DVS-1200 DVS-2400 and DUAL-824 systems.
  • The LA-P antenna Type F connector can also be used for coax connection with a remote mounted EXA-1000 antenna.
    • .......more details
4041-LCN

LCN Door Closer

OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
    • .......more details
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
Technical information
K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

  • Compatible with LiftMaster® Model SL585U Slide Gate Operators
P-8833TC

Pulsar 3-btn 9-Door Transmitter 318 MHz

  • Allstar compatible
  • Nine channel transmitter
  • 8 dipswitches 318 MHz
Programming instructions
DS200-MINI-STORE

Wayne Dalton Mini Storage Door ** Price by Quote Only

  • Mini Storage Door Made to Order
VBELT_4L270

VBelt 1/2" x 27" (4L270)

  • V-Belt not cogged
DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

  • Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
  • Black crinkle head
  • Ideal for decorative (carriage style) hinges
MRIN

LiftMaster Base Riser Mount for industrial operators

  • Works with LiftMaster IHSL24UL and INSL24UL slide gate operators
  • Provides a base-mount option instead of post-mounting the operators
Installation manualManuel d'installationRetrofit guideGuide d'installation
SA1929/A19

Automatic Systems Retrofit Logic Board with Drive for BL229 Board and Double Channel Loop Detector

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .156 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.156*180
CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
312964

ODCC Adjusting Wheel 8" OD 1" Bore

NIR-50-325-KIT

EMX Retro Reflective Photoeye Kit UL325 NC/10K Across NO Contact EMX-5255-K

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • NC and 10K monitoring
  • 50 ft. operating range
  • Sensitivity adjustment
  • Wide range operating voltage
    • .......more details
MV-00025-NEW

Micanan 32-Door O/C/S Transmitter CT-32 313 MHz New Style with Flat Buttons

  • Commercial / Industrial transmitter
2376.187*31.930

Whiting Torsion assembly .187 wire size 31" spring length 93" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
19-60ML-SS

Master Link #60 Stainless Steel

  • For #60 chain
LRS-DB-100

EMX Direct Burial Sensor with 100 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
DEV-RSFD-7000

Devanco Rolling Steel Fire Door 7000 UL Rated **Made to Order

  • Model 7000 are manufactured with UL labels of Class A B or C; however their sizes can be customized to an extent with UL oversize certificates.
  • Model 7000 fire door includes UL labels of 3 1½ and ¾ hours.
  • The fire door’s heat-sensing technology will allow the doors to close automatically with additional smoke protection available that makes the fire door more reliable than alternative options.
  • Door sizes can be customized to fit openings that are 43 feet and 6 inches wide by 26 feet tall.
  • The doors also include viscous-governor technology as well as a 165-degree fusible link.
  • Pricing varies according to size and options selected.
    • .......more details
751-CDN

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) Canadian Steel - 1000/Bag

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
  • Made in Canada with Canadian Steel
GH-353-2

Doorlec Industrial Gearhead Door Operator 2 HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
MOD114C

Manaras Synthetic Oil Upgrade for MGH up to 1.5HP

  • This Upgrade Mod. is only available when purchaed with a compatible operator
  • Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances
1104-7FT-CLAYSTN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Claystone

  • Claystone rigid vinyl retainer with claystone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
FH12-00128-00

Complete Adjustable Hinge Set Galvanized 3-PC

  • Upwardor hinge set
CAPXLV

LiftMaster Smart Video Intercom - L

  • LiftMaster’s cloud-based video intercom for multi-tenant residential properties.
  • The intercom allows residents to see their visitors through live video and grants access to the building via the MyQ app
  • Display and interface – 10” color display with touchscreen
  • Connectivity – WiFi cellular wired high-speed DSL
  • Audio capabilities – Voice over IP – digital call quality with no long-distance charges
  • Video capabilities – One-way video calling with a 135-degree view
    • .......more details
BEA-10-PSMDR2024

BEA Power Supply 100 - 240 VAC 24 VDC Output

041-0155-000

LiftMaster Safety Sensor Brackets 2021-Present

  • IMPORTANT NOTE: The new safety reversing sensor brackets are only compatible with the new safety reversing sensors (041-0136) and are NOT compatible with older style safety reversing sensors.
  • For safety reversing sensor brackets compatible with models pre-2021 refer to 041A5266-3.
DOCK-LEVELER

Special Order Hydraulic Dock Leveler Custom Order

  • Custom ordered to customer requirements
Dock leveler brochure
5009-562-PAINT

Aluminum Touch Up Paint Nail Polish Style Commercial Brown / Brun Comm. #562

  • Glass bottle and brush applicator
BCSI-PM28

Pivin Drapeau Disconnect Coupler BCSI Gate Operator ** Price by Quote Only

SL595205UL

LiftMaster Industrial Slide Gate Operator 2 HP 575V 3PH with Heater - UL325

  • 3 Phase: 575V is a discrete model without field-selectable voltage.
  • Includes factory installed heater kit.
  • P3 MOTOR® high starting torque continuous-duty motor.
  • Operator Duty Rating: 25 cycles per hour.
  • Metal frame 7-gauge pre-galvanized steel.
  • Worm gear reduction 20:1 worm gear reducer.
    • .......more details
MP00070

Micanan Jackshaft w/Aux Trolley Assembly Mod. 8ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
19-40240D

LiftMaster Drive Chain #40 10' Box Black Oxide

  • Complete kit includes: Drive Chain 10' (#40) and (2) Master Link Kits
  • Black Oxide coating provides corrosion resistance
  • Suitable for use exterior applications
236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
PHOTO-075

Manaras Non-Mon. Retro-Refl. Photo Cells Exterior 24V IP67 0.5-32' Range.

  • Non-Monitored reflective Photoelectric manufactured by Sick
K16-GT2-7

LiftMaster Timing Belt

  • 3M belt
  • Durable construction
  • Resists damage from friction and pollutants
  • Even stress distribution for heavy-duty operators
  • For use with LiftMaster CSL24UL CSL24V CSL24VDC
  • DIMENSIONS: 7.5 in OD x 7.25 in ID
    • .......more details
210135

Skylink Chain for 7ft Door

  • Replacement chain for chain rail
ET1820PPAS-1

Carlo Gavazzi Through Beam Reciever 20M Plug

  • High power through-beam photoelectric switch.
  • Range up to 20 m.
  • Easily adjustable sensitivity with 270° potentiometer.
  • LED output indication.
  • Precise detection through narrow beam.
  • Short M 18 metal housing for heavy duty applications. IP 67.
    • .......more details
19-50HL-NP

Half (Offset) Link #50 Nickel Plated

  • For #50 chain
.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH

  • Wire size: .187
  • Inside diameter: 2"
  • Length: 12 ft
GEAR004

Manaras Plastic Gear for MDJ/MDT

  • White plastic gear with 2 holes to accept COUPLING001
WB-350

Skylink Multi-Function Wall Console New ATR Model Ops

  • For use with the Skylink ATOMS AT series garage door openers.
  • Oversized Push Button for activating the garage door opener.
  • Activate opener light on/off and the light will remain on until the button is pressed again.
  • Feature with Lock function to ignore all radio signals for added security.
  • Illuminated LED indication.
  • Easy to Install.
    • .......more details
2000Z

LiftMaster HD Roller Cage Bearing Hinge Flat Mount Both Sides Prime Coated Sold in Pairs

  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Largest Weld Surface in the Industry
  • Easy to Fully Lubricate
    • .......more details
Q104

LiftMaster Standard Arm Assembly CSW24U/RSW12U (75-50293)

  • Also known as: Q038 75-50293 K09-50104 Q040
684-33-110

Universal Bracket 2.25" x 2.5" x 48" w/ Plate 4"x12"

Q027

LiftMaster Motor Capacitor 240VAC 65 MFD K29C-65AU2415

  • Replacement Motor Capacitor (65uF 240VAC 50/60Hz).
  • Compatible with LiftMaster® CSW200U & SL3000U Models (post 2016) and various Commercial Swing and Slide Gate Operators; manufactured before 2016
  • Dimensions: 2" diameter x 4-1/4" long.
91-00401

Truck Door Step Bolt 1/4"-20 x 1.50" (3/4" head)

  • Zinc plated finish
  • Cross Reference: T #80015-1610
41A2818

LiftMaster Limit Switch Drive Gear Kit

  • For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
  • Complete replacement kit includes: helical gear e-clip and grease tube
40659R

Genie Universal 4-Button Remote

  • Pre-programmed settings and a unique programming feature give homeowners a simplified compact multi-door and gate option
  • Easy to set up
  • Compatible with most major brands sold in the USA including: Overhead Door Genie Chamberlain Craftsman Ryobi Sommer Linear MegaCode Marantec Wayne Dalton Liftmaster FAAC Xtreme
LMHNTG

LiftMaster Rearview Parking Access Hang Tag 25/pkg Random Coded

  • Rearview mirror hanger gives access to gated facilities complexes for cars trucks and other vehicles
  • Can be used for larger vehicles with higher cabs as vans various trucks
  • 20-25 foot detection zone
  • Device is engineered for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader
  • Simple transferrable item can be swapped out for rental cars different vans/trucks in a fleet dealer/loaner repair cars and more
  • Tags are sold in batches of 25. Your location may have a facility code. Check with your maintenance department or administrator if needed
    • .......more details
Installation manualManuel d'installationSell sheetBrochure
HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

  • Complete cable locking system for a 1-3/8" or 2" door Keyed alike
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
  • T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)
E/BLOP/149

Automatic Systems Safety Edge for BL229 13'

STRUT-3-30'

Door Strut 3" Hemmed 30ft Long

  • Reinforcement bar 3"
1209

Whiting Roller Hinge Complete

050ACTWFATS

LiftMaster Receiver Logic Board AC WiFi for ATSW

  • 050ACTWFATS is a Receiver Logic Board featuring Wi-Fi® with myQ® technology.
  • For use with LiftMaster® Model ATSW AC Chain Drive Light-Duty Commercial/Residential Door Operators; manufactured after 2018.
  • Unit will feature a yellow learn button
P-0130

Autogate Motor Belt Tensioner Upgrade Kit

  • This isneeded to change over to their current motor
787453

FAAC XT4 4 Channel Remote Control Transmitter 433RC ***discontinued

  • 4 Channel
  • Visor clip & 12v battery included
  • Features programmable technology
  • Dimensions: 2" x 2.5" x .5"