Devanco Canada - Get The Right Garage Door Opener‎ and Parts

V300-TS

Top Seal Weather Strip 100 ft per Roll

For use with bottom retainers installed on top of door.
Vinyl: Black

Q311

LiftMaster Surge Protection for Master / Second *** No Longer Available

For the Miracle-One two arm gate operator - master/ slave
Same as part no. K74-50329

RADIO-KIT005

Manaras plug-in receiver for Board 60 or electromechanical operators 390 MHz *** To extent of inventory

Direct ECB plug-in receiver card kit (RADIO RE100B) for on-site installation.
Maximum 16 transmitters per receiver.

PRO-HHD-7543U-L

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

.262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

EHJ-353-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 575V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

PRO-GH-7583U-L

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

K77-38121

LiftMaster Wiring Harness SL585U SL595U

Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators

K001A6407-1

LiftMaster Logic Board Absolute Encoder

Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators

MOUNTSHAFT018A

Manaras Limit Shaft Kit MGH up to 1.5HP

For MGH MGT MGSL built from 2011 (Yellow C-Box) Limit chain size 410

2200-817

Linear Belleville Washer

2100-1621

Linear Belleville Washer Retaining Disc

2100-1661

Linear Plate Torque Limiter VS/GSLG-A

MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

GALV-363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

CG-HOIST-SINGLE-1

ControlGard Chain Hoist Single Compound 1" Bore

Cornell Single Compound hoists are designed for smaller doors
Features an integral braking system that only moves when the user is actively pulling the chain

MGH-6236-M-N1-RH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

37350

Reversing Contactor CUL - 16 Telco 24V

OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

MQ00011

Micanan 3/32" Aluminum Oval Sleeve Sold per Unit

K11-8061

LiftMaster Main Shaft (1)

Also known as: 11-8061 118061 G118061
For use with various LiftMaster® Commercial Gate and Barrier Gate Operators

745317

Strobe Low Profile Amber Lens Industrial Strobe

Polycarbonate lens
Single flash
Dimensions: 4" H x 5" diameter base
Available in surface mount or magnetic mount

CRG11136P

Pentagon Crank Gear 11:1 36kg PVC *** Price by Quote Only

HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

100 key pack numbered 00 thru 99

OPH-6433-ECB-LH

Manaras Opera-H 3/4HP 480V 3Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

MOD027B1

Manaras Universal Aux. Output Module B070 Red/Green 24V Modification

MOD027B1 modification only when bought with operator
Order MOD027B1 when ordered in conjunction with a commercial operator
Works with BOARD070

CLUTCH007

Manaras Friction Clutch 1-1/4" #50 OGH

PRO-GHC-15011U-L

Micanan 1.5 HP 115V 1P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

10-8026

LiftMaster Replacement Plate for Control Panel BG790

Also known as: K10-8026 G108026 108026

102-0048

TNR Flexam EM 4/1 0+05 Black Weave Repair Sold per Inch

HARNESS044

Manaras Opera Motor 3PH 110 Conn Wiring Harness

OSH-6213-CONT-RH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

EHJX-383-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 208V-3Ph

Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
DC-2000 logic with adjustable Timer To Close Delay On Reverse.
Solenoid Brake prevents coasting and secures the door when closed
Explosion-proof (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

1634-134-W-G/T

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass Grey Tint

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

O18R1003

AirLift Safety Eye Kit Telco

3SL-15R-HORIZ-8

Horizontal Track Set 3" SL 15" Radius 8'-0" Door (2 pcs)

Set of 2 horizontal tracks 9'-6" 13g

K10-3515

LiftMaster Retainer Guide

Also known as: 10-3515 G103515 103515
For use with LiftMaster® Models SL580 & SL590 Commercial Slide Gate Operators and Perimeter Access Solutions

O17R2001

Airlift Automatic Oiler L3000

OSH-6533-CONT-L

Manaras Opera-SH 3/4 HP 600V 3 Ph with Mechanical Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

71-17148

LiftMaster Fuse Link Kit FDC

Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions

K13-36117-1

LiftMaster Cludge Cover for RSW CSW

Protects cludge assembly
Hard cover sloped front beveled edges
Compatible with LiftMaster RSW12UL CSW24UL

71-6532448

LiftMaster Heater Kit Mod. 230V Field Install

Compatible with LiftMaster® Models SL585GL and SL595GL Slide Gate Operators

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

CABLE012

Manaras Brake Cable 7x7 1/16 x 16" w/Stop

Comes with cable stop on one end

COUPLING001

Manaras Coupling Light Duty A3032-1

Used with GEAR004

ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

Replacement screen only

MGH-6536-ECB-RH

Manaras 2 HP 600V 3P Jackshaft ECB Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

SPAMG095A000

NICE Upper Cover Kit MBAR5

BT501L5-BQ

LiftMaster 1/2 HP 115/230V 1p Commercial Trolley Op. wi/ Brake and Slow Speed Mod Installed Logic 5

Low profile trolley operator with brake and slow speed modification installed
Comes with #48 roller chain

IBT4

NICE Interface Module

Required for use of Oview on the new Gen 2 MBAR models
Same as IBT-4N

WHTG-TEMPGUARD

Whiting Special Order TempGuard Door **POR

Special order to customer's specs
1-1/2” fiberglass panels are clad with aluminum exterior facing for easy cleaning and excellent acceptance of paint and decals.
No rivets on face of door to interfere with lettering or decals.
One piece pultruded fiberglass shell featuring foam-in-place urethane insulation.
All hinge fasteners reinforced with steel backing plates.
Replaceable double seal at each panel joint.

.......more details

192417

Torque Force Pocket Guide 3.5" x 5" 195307

Imperial multiplier
Features: Drum specs Plugs specs Manual counterbalancing calculation Spring charts

41A5807

LiftMaster Chain and Cable Kit 7' Door

This is a one piece 7 ft. Chain and Cable Replacement Kit

M-0131

Autogate Proximity (Limit) Switch

M-0133

Autogate Proximity Magnets

K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

C-24X10-134-W

Thermal Window 24" x 10" for 1-3/4" Door White

For 1-3/4" thick door

MGR20-Y-2U-PER-FT

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
Non-monitored edge
Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

902-T-7X9-VL

Hardware Set 3" Industrial 902-T for 7' x 9' VL

A variety of options and sizes are available call for quote
Set includes tracks HD rollers hinges solid shaft drums cables springs and struts if applicable.

3709-4220

Strap 2" w/Ratchet & Double J-Hooks 20ft Long

Polyester strap 2" wide
Work load limit 3335 LBS

.234-3.5-11.25-RHW

Mini Storage Spring .234 x 3.5" x 11.25" long Looped Ends Right Hand

OPH-6212-ECB-LH

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

ME00008

Micanan Disconnect Shaft Gearhead 3/4" x 15.75"

C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

For 2" thick door

41C2760

LiftMaster Chain and Cable Kit 8'

Also known as: 1C2760 41C2760 41C2760-1
One piece 8 ft. chain and cable replacement kit installed on 8ft garage door

EPC-1

Accessory Hardware Kit for Gate Track for 3-1/2" Pipe *** Price by Quote Only

Includes guides rollers & hardware

MGH-6435-ECB-LH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGH-6435-ECB-RH

Manaras 1.5 HP 480V 3P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

218-45-10

PVC Connector for 3/4" - 3/32" RAH

OGH-6534-CONT

Manaras 1 HP 600V 3Ph Gear Head Operator Contactor Model

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
Each transmitter can be used in a limitless number of wireless remote control applications.
Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
The digital DX code format features over a million possible codes.
The DX transmitters are precoded at the factory to unique codes so no field coding is required
Powered by two 3-Volt #2032 lithium batteries included

.......more details

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

C-26-1/2X14-134-W

Thermal Window 26-1/2" x 14" for 1-3/4" Cedo Door White

For 1-3/4" thick door

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

Custom made to spec

GH-6533-0000-CBOX

Manaras Control Box for GH 600V

Control box only

.235-3.25-11.5-LHW

Mini Storage Spring .235 x 3.25" x 11.5" long Left Hand

.235-3.25-11.5-RHW

Mini Storage Spring .235 x 3.25" x 11.5" long Right Hand

C-334-114-INSTAL

Cones 3-3/4" Factory Installed (Pair) 1-1/4" bore

For do-it-yourself installation use part no. SF375-114

.437-6-R-C

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.437-514-L-C

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.421-514-L-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.331-514-L-C

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

.312-6-L-C

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.295-514-L-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.295-258-R-C

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.283-334-R-C

Cut-to-Length Torsion Spring .283 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-134-L-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-2-L-C

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

PRO-HB-7583U-LH

Micanan 3/4HP 208V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login