Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Brown
BEARING051

Manaras Flange 2-Bolt Flange Bearing ID 5/8" Black

  • 2 set screw holes 1/4-28 at 90 degree NO Set Screws provided
  • The original set screws are to be re-used
A22KITB

Erone Web-Based IP 2-Door NANO Kit

  • Atrium 2-Door Controller Kit Web Based IP Hybrid
  • Module Embedded Web Server Includes 2 NANOPB (black mini proximity readers) 15 Credential Software
  • Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
  • On-board Ethernet Port with AES 256-bit encryption
  • Auto-detect hardware modules Quick and easy card enrollment procedure
  • Lock outputs: 2 (750mA @ 12VDC/each) Relay Outputs: 2 Form C relays
    • .......more details
LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
41D8260

LiftMaster Cover 8355W

  • A one piece LiftMaster® "Silver" Replacement Cover.
  • For use with LiftMaster® 8355W Series AC Belt Drive WiFi® Garage Door Openers
HSLG-123

Linear Commercial Slide Gate Operator 1 HP 230V 3 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
111503.0002.S

Overhead Gear Reducer 40:1 RHX

60-6560-C-YELLOW

Speed Bump Yellow 36" Econo Light Weight for Concrete

  • A standard speed bump system section includes (2) main pieces (2) endcaps x 5” long and (1) connector clip.
  • Main pieces may be added and connected to form larger units.
  • 36” long x 10.5” wide x 2” high (main piece)
  • EndCap: 5” Safety Snap On End Cap - sloped modular profile prevents tripping by pedestrians.
  • Yellow Plates: Each speed bump section is embedded with (6) yellow safety plates of weather resistant composite material for protection from salt freeze and thaw.
  • Can be used as a cable cover - bottom sides include 1” x 1½” channels for protecting temporary or permanent cables or hoses.
    • .......more details
4004-10FT

Aluminum Retainer only for Heavy Brush 10' Long 45 degree ** To extent of inventory

  • For angle application (45 degree)
  • For use with Heavy Brush
Q200

LiftMaster Chain Coupling Release K07-50215

  • For Liftmaster trolley operator HCT
2500-2346-LP

Linear Plug-In Loop Detector LP PVT LBL

Programming instructions
109290

Amarr/Alpine Snap Latch Supply Bag for 1 3/8" Thick Doors *** Price by quote only

  • Is needed when 105381: T-Handle Lock Kit for 1 3/8" thick doors are ordered or the lock won't work.
1371

Whiting Complete Bottom Bracket with Cover

K20-1050C-1T

LiftMaster Electric Motor 1/2 HP 115V 1 ph Post 2/99

  • For use with 1-Phase LiftMaster® model HCT Gate Operators
  • Same as Q250
MQ00008

Micanan Set Screw 5/16"-18 x 5/16" Long

7001-10-ANODIZED

Commercial Side & Top Weather-Strip 10' Long - Anodized 7001-AB

  • Anodized galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

  • Removable wall mounting clip
  • Standard digital format: 256 selectable codes
  • Powered by one 9-volt battery (included)
  • Current consumption: 12 mA transmitting
  • RF frequency: 303.875 MHz
  • Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016
    • .......more details
MB-01012

Micanan Electric Motor for Pro LH only 1/2HP 575V 3PH

  • This will only work in the Pro LH operator.
Q118

LiftMaster Access Door Keys Qty 2 K80-50295

  • Also Known as K80-50295
7207

Whiting Balancer Bracket Center for Whiting Roll-Up Doors For #7176 Balancer

  • Steel construction
  • Plain finish
  • Whiting original
J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
SHAFT120

Manaras Input Shaft for OSHW

.192-134-L

Cut-to-Length Torsion Spring .192 x 1-3/4" Left Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
230404

Linear Motor Control Board 5 Relay (w/Brake)

  • For commercial door operator
CPT-223-50

Miller Edge Bulk Extrusion 50' roll

  • For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
  • Sensivity: 15lbs max activation
  • Lead wire 18"-22 gauge unversal
  • Wire configuration: N.O.
  • Electrical interface: sealed module- provides seamless connection to logic or relay type operators
  • ANSI/UL325 recognized component
    • .......more details
950-193

Richards-Wilcox 3" Sgl Btm Roller Carrier with Roller Carrier Tube for short stem roller

  • Original RW part
830

Fasteners Wood Screw #8 x 3" Flat Head Course Thread Zinc Plated 1000/Box

  • Drive style: Robertson / Square head
  • Plain thread
R125USB

Erone Card Enrolment Unit

  • Simply present the badge in front of the unit and the code is transmitted into the PC in the cardholder file.
  • The R125USB is used to quickly add cards to the system.
  • USB communication port connection
J505L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
ETH-A

Doorlec Trolley Type Apartment Op. 1/2 HP 120V Head Only

  • This operator can be wire to receive radio and photo electric control systems loop detectors etc..
  • Headroom Required: 2" minimum at doors highest arc of travel
TRACK-SET-2STD-14

2" Tracks Set 14'-0" Torsion 1-3/4" Door Clips for Wood Frame 12" Radius *** By quote only

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

  • Universal thread for use in either LH or RH wound springs.
  • Includes: (1) winding side only
RS2910B

Roller 2" Steel 9" stem 10 ball

  • Steel Roller Wheel Diameter: 2"
  • Working Length: 8.41" Overall Length: 9.46"
  • Head and Stem Finish: Bare
  • Shoulder: Bulged stem
  • Rating: 15000 cycles of a 12' door
  • Load: 75LB
    • .......more details
BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

  • They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
  • A pillow block bearing could be used if needed
  • Includes (1) RH and (1) LH plate
BK000-B/BLACK

Residential Top Roller Bracket Adjustable 2-Bolt Black Powder Coated Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
  • Individually wrapped
BK149/PR

Residential Bottom Bracket RBB-75 sold as a pair

  • For use with 2" straight track
GBUP412EF-1

Gate Roller 4-1/2" x 2-3/8" Polymer Sold Individually

  • Polymer gate roller with bracket for 4-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
GBUP312EF-1

Gate Roller 3-1/2" x 2-3/8" Polymer Sold Individually

  • Polymer gate roller with bracket for 3-1/2" upright post
  • Works with gate pipes that are 2-3/8" thick or less
WLMODULE002

Manaras Univ. Aux Output Module BOARD070

30004

Doorlec Brake Solenoid 460V with wire leads

STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
.192-2-R

Cut-to-Length Torsion Spring .192 x 2" Right Hand Wound Silver

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
  • Fully resettable and reusable after lockout ocurrs.
  • Commonly paired with commercial safety bottom brackets in sectional door applications.
  • Fits 2" shaft
  • Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.
    • .......more details
Reference manualTechnical dataSell sheet
120BH

12" Heavy Brush Insert 6ft Long

  • Polypropylene bristles
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 24 LEDs per guide light (12 Red 12 Green)
    • .......more details
50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

  • Open / Close with On / Off Key Switch Nema 4/12
  • Green - Open Black - Close
MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

  • Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
  • NOTE: Operator must be supplied with reverse limits
  • If purchasing for field install the limits on the operator would need to be reversed
DOC-6000

Atlas Door Operator Board

  • The Atlas board has been discontinued the Lynx 6000 is a direct replaceement
CP-BRK-WALL

Lynx Wall Bracket Commercial Operators

RP-BRK-WALL

Lynx Wall Bracket RSI

L-14-50-0-D

Cable Tie Standard 50 LB Black 14" Nylon 500/pkg

  • Ultraviolet Resistant
  • Length: 14.56" / Width: .180" / Thickness: .052" / Diameter: 4.125"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
    • .......more details
L-14-40-0-M

Cable Tie Standard 40 LB Black 14" Nylon 1000/pkg

  • Ultraviolet Resistant
  • Length: 14.50" / Width: .140" / Thickness: .058" / Diameter: 4.00"
  • Low insertion and pull through force
  • Advanced pawl and teeth design
  • Angled tail provides quicker initial insertion alignment
  • Tail finger grips allow easier handling and tightening
    • .......more details
CP-CLUTCH-D-58

Lynx Clutch Disk 5/8"

MH00027

Micanan Collar 1/2" ID

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

19-4071

LiftMaster Chain #40x71 No Master Link

  • #40 x 71 pitch no master link
  • Same as G194071
  • Compatible with LiftMaster Model SL595GL Slide Gate Operators.
729014

FAAC Manual Release Dial

71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

41AB150-2

LiftMaster Receiver Logic Board ** NLA

  • Also known as: 41AB150-2 41AB150
  • Receiver Logic Board 315MHz
H-0168

Autogate VBelt Banded B-66

  • New Style Double Reduction
K76-37667-2

LiftMaster Limit Box Kit

  • Compatible with model SL585 Slide Gate Operators.
10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

  • Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
  • Has a variety of mounting hole patterns compatible with many OEM manufactures
  • For use with J H DJ DH
  • May be welded
MZ-00005

Micanan Synthetic Oil in Reducer Cold Temp. Mod.

  • For models PRO-GH GHC GT and GSD
3BXL

Control Station Exterior Surface Mount O/C/S N4 with Key Lockout

  • Metal Enclosure
  • Buttons aligned in a triangular pattern
  • H=4-3/8" W=4-1/8" D=2-5/8"
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
41D8859

LiftMaster Cover 8550WL WLED

  • Burgundy Replacement Cover.
  • This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017
2704.148_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.148*180
CGH751L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

  • Hand crank for SL3000
PRO-SD-10011-U-RH

Micanan 1 HP 115V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
    • .......more details
28-32082

Truck Door 2" Horizontal Track with 8" Radius 120" Curbside (RH) for Whiting Roll-Up Doors

  • SPECS: Length: 120" Fits door sizes: Greater than 96" high
  • Cross Reference: W #11-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
.171-2.188-60-R

Truck Door .171 x 2.188 x 60 RHW

.171-2.188-60-L

Truck Door .171 x 2.188 x 60 LHW

MP00128

Micanan Up-Charge Track and #41 Chain for 10' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
SEA-1200

SEA Wireless Video Intercom System w/Surge Protector

  • Answer the gate intercom and open the gate from anywhere in the world ● 1-way video 2-ways audio communication with visitor ● Simultaneously calls up to 4 devices ● Use your smartphone phone as virtual key ● Connect to the intercom directly through your phone’s Wi-Fi enter the passcode for home hub Wi-Fi and the device is connected ● View the gate/door and open any time with monitoring mode ● Latching outputs for hold open ● Upgraded camera with IR cut filter for better color by day and IR night vision by night ● Store images of the last 32 missed callers on your phone ● Connects to your local internet router via WiFi or Ethernet ● Compatible with most wireless range extenders and wireless bridges for long distance applications ● No monthly fees
  • Entry codes: 1200
  • Ethernet Range: 328 ft
  • Wifi Range: 197 ft (subject to Wifi router range and environmental conditions)
  • Enclosure: IP65 Stainless Steel
  • Dimensions: 10.25" W x 8.5" L x 4.7" D
    • .......more details
K94-37848-1

LiftMaster Electric Motor 1HP

  • Replacement motor for SL595101U
V7001-BLACK

Replacement Vinyl Only for 7001-Black 200ft Roll

  • Sold in 200 ft rolls only
210109

Skylink Pulley Assembly - Chain

R5207

Pulley 4" Zinc Plated Steel

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Hardened inner race
HCT10

LiftMaster HCTDCU Rail Only for 9'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

LJ8950W

LiftMaster Light Duty Commercial Jackshaft Op. for Rolling Doors

  • Ideal for smaller/lighter commercial doors with light duty cycle requirements
  • MyQ Technology Built-In Wi-Fi Real-Time Alerts
  • Smooth Start/Stop
  • Optional Accesories 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
  • Powerful Add-Ons 811LM and KPW5/KPW250
KNX-2

Fire Access Station with Switch

  • Fire access station with contact on microswitch
  • Closes when padlock (not included) is removed
PRO-X_MOD-5HP

Micanan Explosion-Proof Modification N-7/N-9 for 5HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
PRO-4X_MOD_3HP

Micanan Nema 4X Modification 3HP

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • For 3HP motors
.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
MP00106

Micanan Warning Light Red/Green Remote Mount Box

.295-6-R-C

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.225-258-R-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
MW-00232

Micanan In-Line Torque Clutch Assembly Modification

  • Clutch is mounted in between motor and reducer flange
  • Overall length of operator increases by 3.85"
  • For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp
2807.148.180

Whiting .148 x 2-3/16 x 18" Curbside with Cones

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
29135

Doorlec Transformer 550Vpr 28V sec. 50VA

PRO-HB-5043U-LH

Micanan 1/2HP 460V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
CAM012

Manaras Roller Cam Opera

PRO-H-5023-U-RH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters