Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK-00033

Micanan Transformer 575V-24V-40VA

RATCHET_BAR

Rachet Bar for Holdown Assembly

SPUR_GEAR

Spur Gear For Holdown Assembly

SMF5005

Adjust Holdown Assembly With Internal Float

Ratchet Bar Not Included
A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green

HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

HRB-9

High Riser Bracket for 7" Above Dock or Higher 9"

High Riser 9" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-5

Standard Riser Bracket for 6" Above Dock or Less 5"

Standard 5" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-6

Standard Riser Bracket for 6" Above Dock or Less 6"

Standard 6" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

Used on the BL229 gate op.

17-2001

LiftMaster Pulley 8" x 5/8" 4L Belt (K17-2001)

Same as K172001

15480

Doorlec Heater Strip 175 W 575 V

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

DBE-20

Molded Rubber Bumper Black 20" L x 4 1/2" W 3" Projection 4-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 4 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long

Reinforcement bar 2-1/4"
20G

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

Reinforcement bar 2-1/4"
20-GA

LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1012-24

Laminated Bumper Standard Black 12" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1012-14

Laminated Bumper Standard Black 12" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB824-11

Laminated Bumper Black 8" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-14

Laminated Bumper Standard Black 12" x 14" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB412-36SF

Steel Faced Laminated Bumper Black 12" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB406-36SF

Steel Faced Laminated Bumper Black 6" x 36" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB406-24SF

Steel Faced Laminated Bumper Black 6" x 24" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-24SF

Steel Faced Laminated Bumper Black 12" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-14

Laminated Bumper Standard Black 10" x 14" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

Clipped ends
44" long 60" stretch 300 lb load

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

Double sprocket for PRO-H/HB

T008

Manaras Trolley Track 8ft for 1/2HP models *Actual length 126"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

T010

Manaras Trolley Track 10ft for 1/2HP models *Actual length 150"*

For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

CP-SH-34-1712_SHAFT_ONLY

Lynx Clutch Shaft Only for HDC Operators

Fits all HDC operators - waterproof or not. All HP all years
3/4" x 17 1/2" - 2.15lbs

AIRSWITCH016

Fraba Air Wave Switch Only

Fraba air switch only

HINGE-611-PCG

Powdercoated Hinge #6 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #6 - 0.81 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-311-PCG

Powdercoated Hinge #3 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #3 - 0.73 lbs
Powdercoated Grey
For use with 7/16" stem rollers

HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
Powdercoated Grey
For use with 7/16" stem rollers

CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

This rope is most commonly used on small overhead cranes and pulley systems.
Provides strength and flexibility but not a lot of wear resistance.
Cable break strength: 13600 lbs

K32-8002

LiftMaster Gear Reducer

Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002

MB-01202

Micanan Electric Motor Only 1/2HP 575V 3PH Base Mount FR56

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** NLA

For old 455 Automatic Doorman opener

MF00007

Micanan Hex Head Bolt 1/4" - 20UNC 3/4" Full Thread

Used on PRO-GHC
4 required per operator

MM00008

Micanan Frame GHC MSI0034

MG00018

Micanan Lock Washer 3/8"

PRO-GHC operator parts
10 required per operator

MF00019

Micanan Hex Head Bolt 3/8"- 16 UNCx1 Full Thread

Used on PRO-GHC
6 required per operator

9-22-1

Offset Strut Plate

MD-00005

Sprocket 410B12 3/8" NO KW 2 SS 1/4"

41A4208-2

LiftMaster Chain Spreader Kit

Chain Spreader Replacement Kit.
For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
Complete kit includes: Chain spreader replacement screws and washers.
Also known as: 41A4208 41A4208-2 062210

31343

Doorlec Sprocket 41B23 - 5/8" bore 2-Hole

MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

Open-Close-Stop
Dimensions: 7" h x 2-3/4" w x 3-1/2" d
Exterior surface mount

MB-03001

Micanan Electric Motor Only 1 HP 110/220V 1PH Base Mount O.D.P FR56

Base mount motor fits: T TB APT J EJ H EHJ HHD SD

37355

Reversing Contactor 120V Coil

ALUM-5P3

Aluminum 24" x 100' Spool Espresso # 5P3

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P3
Reverse side is #431 Bright White

Colour chart

BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

Control board for BOARD065

H503L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

50615

Splash Proof Cover EHJ / HDC

Drawing

109007

Allstar Slide Switch Only Ivory *** Discontinued

ABC selector switch only

COLLAR004

Manaras Collar 5/8"

3PHCONV

LiftMaster 3-Phase Conversion Kit

The transformer kit will convert an input voltage of 208 / 240 / 480 / 575 3 phase VAC to an output voltage of 120 VAC.
Included in New 3-Phase Transformer Kit: Transformer with bracket (2) Cable ties Bushing Wire sleeve 2’ (.61 m) (5) Wire nuts Mounting bracket 10-36745 and mounting hardware (for installing on CSW24U operators) (6) Operator rating replacement labels Accessory outlet rating replacement label
Compatible with SL3000501U SL3000101U CSW200501U and CSW200101U AC gate operators only

.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

VWS-34-WHITE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box White

Pan head
S point

VWS-34-BROWN

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Brown

Pan head
S point

VWS-34-MED-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Medium Oak

Pan head

PRO-HHD-5083U-LH

Micanan 1/2HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

BRACKET111

Manaras Hood Mount Angle Bracket

41C5497

LiftMaster Wiring Harness Kit High Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

Easy to carry or clip on sun visor.
Works in conjunction with Skylink Universal Receiver: Model SL-310R.
Operating range of 100 feet and more.
12V alkaline battery included.

MP-00002-460V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details