Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Pivin
MJ00013

Micanan Brake Shoe and Drum Assembly

  • Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
  • Assembly includes: Both right & left brake shoe and the drum
CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

  • Single limit with curved actuator lever
  • Switch attaches directly to the Logic 6000 board
TRANSF142

Manaras Transformer 575-24V 40VA

  • Transformer 575V Primary 24V Secondary 40VA
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

  • Open/Close remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
  • Alternate part number: MN-100TI-A
Programming Instructions
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

  • 1-Channel Gate Receiver
  • High-sensitivity short-range radio receiver
  • Operates in conjunction with the 9-inch local antenna (supplied).
  • Designed for use with automatic gate operators or systems where a remote antenna is needed.
  • Same as: DNR00013P
Installation Manual
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

300BL

3" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1705
1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4" • DIE # ES18191
1104-16FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
TC1

Tri-Code Transmitter 1-btn Visor - DISCONTINUED

  • 10 dipswitch format 3-position slide switch
  • Compatible with Multi-Code 300 & 310 MHz Delta3 & Stanley 310 MHz
  • Discontinued 7/1/13
375LMC Programming InstructionsInstructions de programmation pour 375LMC
HSC-600

Hand Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Tool length is 25-1/2"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
24-RWB-PAIR

Winding Bars Round 24" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
28-32071

Truck Door 2" Horizontal Track with 8" Radius 107" Roadside (LH) for Whiting Roll-Up Doors

  • SPECS: Length: 107" Fits door sizes: Up to 96" high
  • Cross Reference: W #11-3
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
  • 8" radius
  • For use with 2" diameter steel or nylon rollers
    • .......more details
28-30012

Truck Door 1" Vertical Track 93.5" for Todco Roll-Up Doors

  • Galvanized steel 14 gauge construction
  • For use with 1" diameter rollers
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
Z9403

Coupler 1" Bore Adjustable

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
R5200

Pulley 3" HD Yellow Zinc Plated Steel 200lb Max

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/8"
  • Riveted with Ball Bearing
HD3080

Step Lift Plate Curled

  • Step Plate/Lift Handle
25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

  • Zinc plated shaft 10 roller ball design
  • Shaft Length: 3" Overall Length: 3.75"
  • Cross Reference: W #3228 T #61424 T #70225
  • Box quantity: 25
D-TEK-LM

EMX Industries Plug-in Loop Detector for Liftmaster operators ** To extent of inventory

  • Plug-in Loop detector for SL575 SL585 SL595 BG770 BG 79024VAC
  • Works with most LiftMaster gate operators
  • Won't work with Elite Series Mega Arm Slide & Swing
  • Simply plug it into the harness already in the operator
  • Loop lead-in wires connect to operator terminal strip
  • Gold plated control contacts
    • .......more details
Installation ManualSell Sheet
4X8SC50

Devanco Loop 4' x 8' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
WSL-1

Devanco WeatherStrip Lubricant 275g aerosol

  • Lubricates and protects Weather strip on garage doors doors and windows
  • Helps prevents sticking during extreme hot and extreme cold conditions
  • Same as LS-300
  • 12 cans per case
Safety data sheetFiche de données de sécurité
SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

  • High gain superheterodyne receiver
  • High RFI immunity
  • Supplied with F-connector whip antenna and mounting bracket
  • Memory: storage for up to 40 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
S2TR2641E2

Erone 2-Channel Mini Transmitter 433MHz

  • Open/Close remote for 2 doors
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochure
MV-00300

Micanan Banner Intrinsically Safe Reflective Photocell ONLY (0-25ft. Range)

  • Model Q45AD9LV same as part # 37620
  • Range: 9 m; Input: 5-15V dc
  • Output: NAMUR
  • 2 m (6.5 ft) cable
  • Nema rating: NEMA 6P
  • DOES NOT include the bracket or the reflector. Use MV00482 for the kit
    • .......more details
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
61LM

LiftMaster 1 Button Transmitter Dip Switch 390MHz *** To Extent of Inventory use 811Lmx instead

  • For openers manufactured from 1984 - 1989
  • Liftmaster models: 1040 1045 1046 1050 1055 1056 1060
  • Wayne Dalton models: 100WD 200WD 300WD
  • Chamberlain models: 140 150 240 350 450 550
  • Sears Craftsman & Master Mechanic models (see paragraph below on the manufacture date)
  • For openers manufactured from 1990-1992
    • .......more details
Programming InstructionsInstructions de programmation
3-44-2

Roller Carrier Only 2-Hole Sold per Piece

  • Sold per piece no box quantity
VBELTB30

Manaras VBelt 5L 30" Type B (5L330)

  • For models OTH OTBH OSL
  • Same as 5L330
25-60502

Truck Door T-Style Ramp Handles Roadside (Left)

  • Black plastic construction
  • Cross ref.: 39504-1
PULL-CHAIN

Pull Chain Spring

  • Used with a hand chain for full vertical doors.
  • Eliminates the need for leaf bumpers
K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

  • Normally Open
  • SGR13-193-028-D1-E-HS8-5
  • SGT13-193-028-D1-E-01-15
  • 1928mm housing 1800mm active height 28 channels NO relay output 15m cable
Specification sheetWiring diagram
2806.206.380

Whiting .206 x 2-3/16 x 38" Roadside with Cones

DWI-LOCK

Doorway Impact Monitored Slide Slock V2 *** Price by Quote

  • Monitored Slide Lock for the DoorWay Impact Sensor.
  • Connects to an Air/Impact switch to mechanically and electrically lock the door.
RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

  • Rapido version of model OGH
  • Includes PHOTO-061 Monitored N4X Thru-Beam eyes
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
PL-A26-LENS

Lynx Front Light Lens LPL 455+

10PBR45LL

Push Plate S/S 4.5" Round Large Logo

  • Compatible with 900 433 and 300mhz.
  • May be hardwired to the operator or connected to BEA transmitters.
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
XF600VAC7

LiftMaster 600V Transformer Kit 700

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
RSH-6814-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

  • High speed heavy-duty v-belt drive industrial operator.
  • Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
  • Two times the speed of the standard jackshaft operator
  • Manages soft-starts and soft-stops
  • Can be wall or shelf mounted on either side of the door
  • Cast iron pillow block bearings
    • .......more details
JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH Equivalent DC Operator Extended Cycle 1200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
    • .......more details
JHDC_Installation-manualJHDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
TDC12S1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 20 Cycles/Hr 1200LB

  • Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
TDC_Installation-manualTDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guide
TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
K177A0112

LiftMaster Trolley Spring

  • Also known as: 177A112 62274 177A0112 062274 132C2180 177A78
400-CBAC-EG-115V

FAAC 1042011277 Long (EG) Gate Arm w/Positive Stops 50-1/2" L *** Price by Quote Only

  • 400 CBAC EG Long Arm with positive stops
  • For hydraulic Swing Gate Operator
  • This arm is meant to be used to transform a kit into a master/slave or bi-parting system or as a replacement operator for an existing FAAC system
JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB

  • Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
  • myQ Compatibility: Setup available for either myQ or myQ Facility
  • Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
  • Heater sold seperately
  • Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
  • Motor Power: 24VDC
    • .......more details
JDC7S1BMC_Installation-manualJDC7S1BMC_Manuel-installationData sheetFiche TechniqueQuick connect guideGuide de connexion rapideOrdering guideSprocket recommendation
GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized
GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

  • The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
  • The IRB-4X2 will work with any control board that accepts dry contact on the input.
  • The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
  • *Not for use in applications requiring UL325 compliance
  • Thru beam design is not affected by shiny surfaces
  • Wide 24˚ transmission angle allows easier alignment and increases reliability
    • .......more details
Spec sheet
VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

BEA-10EARA

BEA Rain Hood for Eagle Artek Black

  • Rain hood only
CAMPLATE019

Manaras Cam Plate Opera C-Box

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

  • Does not include bearing
  • Steel Zinc plated finish
DC7AH

LiftMaster Battery for MAXUM Integrated BBU DC Units 7AH

  • For use in Liftmaster MAXUM DC Commercial BBU ops
  • 7 AMP
TDC7S1BMC

LiftMaster MAXUM Trolley DC Comm. Op (#48) 1/2HP Equivalent 120/240V 1PH Std Cycles 700LB

  • Smooth Start/Stop Operation - New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
  • Faster Speed - Average of 12” per second opening on sectional doors.
  • Battery Backup Option - Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately).
  • Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
  • Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
  • Drive Type 65:1 Gearbox with #50 Chain Output
    • .......more details
TDC_Installation-manualTDC_Manuel-installationData sheetFiche techniqueQuick connect guideGuide de connexion rapideOrdering guide
OPH-6533-M-N1-RH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
CCTD-04

Fuse 600VAC/300VDC Class CC Time Delay 4AMP Sold per Fuse

  • Sold per fuse
CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
MGH-6234-M-N1-RH

Manaras 1 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K19-40720D-NP

LiftMaster Chain #40 Nickel Plated 30ft

  • Inclueds (3) Master Links.
FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs
SC-25X15-78-W

Thermal Window 25" x 15" for 7/8" thick Steel Craft Door White

  • For 7/8" thick door
50690-2

Doorlec Clutch Assembly for ETBH w/Double V-Belt

18011

Doorlec Gearbox for TCBOD Barrier Gate

7176.218*29.90

Whiting Heavy Duty Torsion Assembly .218 x 29" shaft 90"

K07-8007

LiftMaster Arm Hub for BG770/790

  • Also known as: G078007 07-8007 078007
AFB120

LiftMaster Fire Access Box w/Micro Switch & Knox Key Switch Option

  • ll-in-one fire access box
  • Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
  • Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
  • NOTE: fire department padlock and Knox switch NOT provided
050ACTWFLKMC

LiftMaster Receiver Logic Board AC WiFi Lock Capable

  • 315MHz Security+ 2.0 Lock Capable Receiver Logic Board Replacement Kit.
  • For use with various LiftMaster® and Chamberlain® WiFi® AC Chain Drive and Belt Drive Garage Door Openers; powered by myQ®.
  • This replacement part is for units featuring a yellow learn button; manufactured after 2017 only
GDI-HB310

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft UL-325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
2376.162.18.770

Whiting Torsion assembly .162 wire size 18" spring length 77" shaft

OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
LJH-383-1/2-RH

Doorlec 1/2 HP 208V 3PH Jackshaft Operator Right Hand

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
    • .......more details
Technical information
P-639T

Pulsar 3-btn 9-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • Wall mount
  • OPEN-CLOSE-STOP 9 doors
  • 8 dipswitches 318 MHz
Programming instructions
P-8833TC

Pulsar 3-btn 9-Door Transmitter 318 MHz

  • Allstar compatible
  • Nine channel transmitter
  • 8 dipswitches 318 MHz
Programming instructions
P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

  • Allstar compatible
  • Economy housing receiver
  • OPEN-CLOSE-STOP
  • 24V AC/DC
  • 8 dipswitches 318 MHz
Wiring-diagram
EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
4580-304-GRANITE

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Granite Grey 458-20

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
CRG5120P

Pentagon Crank Gear 5:1 20kg PVC *** Price by Quote Only

041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1
TODCO-DOOR-USA

Todco Special Order Plywood Core Dry Freight Door Price by Quote Only

  • TODCO patented the Transportation Core™ a 3/4" 7-ply premium-grade plywood that forms the foundation of the door.
  • It has a hardwood outer veneer that virtually eliminates wood grain "telegraphing" giving a smoother more uniform look that lasts.
  • The TOUGHSHELL® system is a multi-layered formulation of liquid polymers that are specifically designed to work together on wood substrates and provide a state-of-the-art defense against moisture abrasion temperature extremes harsh chemicals even UV damage
  • Standard on all TODCO Dryfreight and TODCOLD® doors only EverWare™ rivets give you the protection of stainless steel – without the cost.
ZAP-800-3-PB

Zap Control Box Assembly for ZAP800

12-1008

PVC Strip 12" x .120" Standard for Replacement Strip Curtain Sold per Foot

  • Suitable for most average applications.
  • Temperature Range: -20°F to 150°F (-28° C to 66° C).
  • Formulated with ingredients that meet USDA requirements for incidental food contact.
02-411

LiftMaster Pull Switch Assembly Nema 4

  • May be used in two different ways: as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring).
  • In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
312964

ODCC Adjusting Wheel 8" OD 1" Bore

CT753L5

LiftMaster 3/4 HP 208/230/460V 3P Commercial Trolley Operator Logic 5 with Carwash Mod

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • This operator comes with the carwash modification already installed
    • .......more details
41C2762

LiftMaster Chain Assembly Kit 7' (041D3484)

  • Also known as: 41D3484 41A3484 41C2762
  • For use with various chain drive garage door openers that utilize a T-rail and have a 7' garage door
MA010

LiftMaster Gate Arm Bracket

  • Designed for use on all Mega Arm gate openers
  • Bracket will work with either right-hand or left-hand operation gate arm.
CLUTCH007

Manaras Friction Clutch 1-1/4" #50 OGH

RN0035-SS

Roller 3" Black Nylon 4" Stainless Steel Stem Precision Sealed Bearing 6203

  • A supreme precision sealed bearing roller that never requires lubrication
  • Ideal for high usage and high moisture areas ie..carwash
  • 7/16" stainless steel shaft.
  • 100 lb load 100000 cycles for a 12' door
  • Overall length is 5.17” and the shaft (stem) is 3.90” which does not include the shoulder.
VSA-5

Electrical Vehicle Treadle Switch 24VAC 5ft Long Black/Yellow

  • Exterior Electrical Vehicle Treadle Switch
  • 5 Ft Length
  • Device activates bells lights and other devices by exerting force on top
  • In protective housing with ramped edges
  • 24VAC
  • Yellow/Black in colour
    • .......more details