Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door
MG-00082

Micanan Plastic Spacer for Boards (Long Length 1.190)

VBELT_4L300

Lynx VBelt 4L 30"

MK-00706

Micanan Harness 3-Phase Contactor Board

MM-00360

Micanan Circuit Board Support U-Bracket

MM-00366

Micanan Circuit Board N-4 Support U-Bracket

MK-00704

Micanan Harness 1-Phase Contactor Board

MK-00644

Micanan Plug-In Harness for Limit Switch Circuit Board 6-Wire

  • Limit Harness for MK00641 MK00488 MK00642 circuit boards
MK-00006

Micanan BX Conduit 1/2" ID x 5/8" OD Sold by the Foot

MK-00017

Micanan Ground Lug

MK-00015

Micanan Fuse 2 Amp 250V Glass

MK-00160

Micanan 12-Pole Terminal Strip

MK-00051

Micanan Overload Reset 3-Phase 3.7 - 5.5 Amps

MK-00052

Micanan Overload Reset 3-Phase 5.5 - 8.0 Amps

MK-00053

Micanan Overload Reset 3-Phase 8.0 - 11.5 Amps

MK-00054

Micanan Overload Reset 3-Phase 12.0 - 16.0 Amps

MK-00049

Micanan Overload Reset 3-Phase 1.8 - 2.6 Amps

MK-00139

Micanan Overload Reset 3-Phase 0.8 - 1.2 Amps

MK-00048

Micanan Overload Reset 3-Phase 1.2 - 1.8 Amps

MK-00044

Micanan Overload Reset 1-Phase 17 Amps

MK-00035

Micanan Overload Reset 1-Phase 6 Amps

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

  • LC2K1210B7 mini contactor
MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

  • 8-pin
MK-00562

Micanan Relay 120 VAC 8-Pin Plug-In

MK-00223

Micanan Transformer 460V-110V-100VA

MK-00100

Micanan Transformer 575V-110V-100VA

MK-00222

Micanan Transformer 460V-24V-100VA

MK-00099

Micanan Utility Limit Switch (Telemecanique) w/Roller

MP-00077

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41 w/Pillow Blocks

MK-00025

Micanan Double Limit Switch Cherry DAT

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00062

Micanan Timer Base 8-pin

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
MK-00477

Micanan Timer Plug-In Type 0-10min 120V

MK-00058

Micanan Dual Timer 24V Module APT

MK-00059

Micanan Timer 7 Day/24hr Economical

MV-00220

Micanan Pull Cord DPST Swivel Type - Nema 4

MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

  • Provides added strength to the belt drive system
PRO-PANEL

Micanan Custom Panel

  • Made according to customer's requirements
MV-00017

Micanan Key Switch O/C/S Btn Tamper Proof Nema 1 Flush Mount

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

  • Surface mount
MV-00012

Micanan 3-btn O/C/S w/Key Lock-Out Metal Housing Nema-4 Pushbutton Control Station

  • Surface mount
  • Metal Housing
MK-00785

Micanan 3-btn O/C/S Nema-7/9 Pushbutton Control Station

  • Surface mount
  • Killark
MV-00010

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Metal Housing
MV-00007

Micanan Single Button Nema-4 Pushbutton Control Station

  • Surface mount
  • Non-Metallic Enclosure
  • Double Pole Contacts
  • Dimensions: H=3-1/4"" W=2-3/4"" D=2-1/2""
MV-00005

Micanan PBC-3 3-btn O/C/S Nema-1 Pushbutton Control Station Flush Mount

  • Flush mount
MK-00031

Micanan Transformer 230V-24V-40VA

MV-00002

Micanan 2-btn O/C Nema-1 Pushbutton Control Station Metal

  • Surface mount
PRO-H-5083U-LH

Micanan 1/2HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
1005-1-3/8-12'

Aluminum Bottom Retainer U-Shaped 12' Long

  • For door thickness 1-3/8"
MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

  • For PRO-LTB LJ LH LHAB
MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

  • For 3/4 & 1 HP Micanan trolley operators
SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
SPR60B18X1

Sprocket 60B18 x 1" Bore 1/4" KW

  • Same as MD00425
HAML-WIRING-HARNESS

GDI Wiring Harness Length Per Foot G3343

  • If over 10' is required
HAML-MOUNTING-BRKT

GDI Side Mounting Bracket N/C When Ordered w/Operator

MD-00425

Sprocket 60B18 x 1" Bore 1/4" KW

OSH-6434-ECB-LH

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

RA-HOIST

GDI RA Chain Hoist/Brake 'BCR' N4/Flr Levl Dscnct N4 Field Install

  • Can be added in the field
ME110-C

Miller Edge PVC Mounting Channel Sold by the Foot

  • 7/8" length
GDI-HB320

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft UL325 Photo Eyes Extra

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
ME110-2W-BLK-E

Miller Edge 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Worksheet
50740

Doorlec On/Off Switch 575V 3Ph Gate Op

  • 20amp
PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

  • Thru-Beam type
ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

  • Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
  • Touch sensitive signaling that allows for immediate stopping and reversing of motion.
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration.
    • .......more details
Worksheet
PRO-J-10081-U-LH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
12119

Doorlec Commercial Aluminum Sliding Carriage with Teflon Insert

  • Works on all Doorlec trolley operators
PRO-J-10011-U-RH

Micanan 1HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.421-514-L

Cut-to-Length Torsion Spring .421 x 5-1/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.406-334-R

Cut-to-Length Torsion Spring .406 x 3-3/4" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.312-514-R

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.319-514-R

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-514-Installed
.312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.306-2-R

Cut-to-Length Torsion Spring .306 x 2" Right Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-200-INSTALLED
.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.295-514-R

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.295-514-L

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-514-R

Cut-to-Length Torsion Spring .283 x 5-1/4" Right Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
.283-6-L

Cut-to-Length Torsion Spring .283 x 6" Left Hand Wound White

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED