Devanco Canada - Get The Right Garage Door Opener‎ and Parts

88824

Marantec Sprocket Holder Assbly For Heavy Duty 1.2mm Belt Rails Only

Compatible with Marantec Heavy Duty (1.2mm - 18 gauge) 2-Piece & Standard Belt Rail
Compatible with Marantec models: LC1000 M4500 M4500e M4500eI M4700 M4700e M4700eI M4900e Q7500 Q7700 Q7900 Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy LC and Synergy Solo
Compatible with Marantec belt rails: M13-1207B M13-1208B M13-1210B M13-1212B. M13-1214B

AM-PC-CUSTOM

Linear Proximity Card SecuraKey Custom Coded Linear Format ACP00739C

The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
Custom Coded. Must provide Facility Code and Start #
Dimensions: 3.4" L x 1.9" W x 0.13" Thick

.......more details

P40-10PFO

Hand Crank Reducer 107174

T108

Manaras Trolley Track 8ft for 3/4 HP models

For models OTH/OTBH/RTBH 3/4hp only with Chain #41

T110

Manaras Trolley Track 10ft for 3/4HP & All APT models

For models OTH/OTBH/RTBH 3/4 hp only with Chain #41

LEVER092

Manaras Close Limit Actuator

MS-00007

Micanan Trolley Track Set 12 Ga. 18'6" (for 16' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

HSC-600-BOLT-3012

Replacement Handle Bolt for HSC-600 Swager Sold Individually

Replacement bolt only to bolt the HSC-600 handle to the jaws.
3 bolts are required
Sold individually

1003-3.5"-200FT

Bottom U-Rubber 3.5" Black 200' Long

200ft spool of vinyl insert.

TCBOD-311

Doorlec Double Arm Barrier Gate Operator 1/2HP 120volts w/ heater and DC2000 board

raffic Control Barrier Gate Operator with 24' wishbone arm

Installation manual

LDC801

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Remote compatibility chart

GAREX-HRDWE-BOX

Garex Hardware Box Special Order

specify size color details when ordering
Please call for pricing

K10-34758-2

LiftMaster Battery Tray CSL24U

For use with CSL24U
Also known as: K75-34986-2

12-12004

LiftMaster 1" Ball Bearing

For use with various LiftMaster® Heavy Industrial-Duty Commercial Door Operators
Drive shaft bearing used on RBH
Same as K12-12004

ETBH-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

This is an upgrade option when purchasing a door or bottom panel

CP-TIMER-CN

Lynx Relay (Dual) Timer Hard Wired

610.9723

Whiting Panel Option for Long Pull Strap 32" L

This is an upgrade option when purchasing a door or bottom panel

343.155-CUT

Whiting Tongue & Groove Bottom Panel Plain Primer Only 15-1/2" Cut to Custom Size

Cut to exact size required ** customer must specify
Primer only
Does not come with any hardware no retainer no seal

169026

Euro Center Hinge (25233) Zinc Plated

Steel Zinc plated
Thickness: 0.098"
Pin: 0.276"
Mounting holes 0.275"
Use with Euro side hinge #169027

O17R1000

AirLift Inline Airline Dryer

O01R1108

AirLift Op. Original 8ft Complete w/hardware

HYBRID-BLK-15

Residential Side & Top PVC/Aluminum W/S with cap 15' Long (181") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-18

Residential Side & Top PVC/Aluminum W/S with cap 18' Long (217") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-8

Residential Side & Top PVC/Aluminum W/S with cap 8' Long (97") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

19-41240D-NP

LiftMaster Drive Chain #41 10' Box Nickel Plated

#41 chain 240 links
Complete kit includes: Drive Chain 10' (#41) and (1) Master Link Kit.

QW210

NTE Flameproof Resistor 1/4 Watt 1 kohm 250 mW Axial Lead Sold Individually

AHB-716

Adjustable Hinge Bracket for 7/16" Roller Shaft

Mounts on the #1 hinge to make the hinge adjustable from #2 through #13
Eliminates the need to stock odd size hinges
Works for 7/16" shaft diameter rollers

MAW123-YEL-RH

Miller Edge Air-Wave Edge Yellow Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.

MO00006

Micanan Gearhead Disconnect Spring

Dimensions: 0.92ID x 0.09G x 2.00"L

BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

Includes 1 left and 1 right hand bracket
BB-4 SF

ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

GH-311-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 115V 1P Contactor Model (Hard Wired)

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

Cones for 6" ID Right Hand Wound spring wire
Not universal thread

SG-13-NO/NC

Telco Light Curtain with Rectifier w/ Normally Open/Normally Closed Contact 72"

1-10 metre sensing range
16 to 56 parallel scanning beams
Active height of 720 mm to 2520 mm
Length of 868 to 2668 mm
3 different channel placement models
Cable or plug connection

.......more details

236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

SPR50B42X114

Sprocket 50B42 1-1/4" shaft 1/4" KW

42 tooth sprocket for #50 chain

10-10930

LiftMaster External Disconnect Bracket

Also known as: 10-7006 G107006 107006 1010930

25E10272

Truck Door Stud Plate for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors (2 Stud)

Steel construction Black E-coat finish
Stud plate for 2 stud
Cross Reference: W #2032

426-0913

Richards-Wilcox Galvanized End Cap T175-24" LH

MO00034

Micanan Brake Compression Spring (5/16" ID)

GTO-R550

Nortek Replacement Swing Gate Control Board

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

19-60ML-NP

Master Link #60 Nickel Plated

For #60 chain

19-80HL-NP

Half (Offset) Link #80 Nickel Plated

For #80 chain

19-40ML-NP

Master Link #40 Nickel Plated

For #40 chain

7-22-1

Replacement Cylinder Zinc Includes 2 Keys

Includes 2 keys Screws Backer Plate and Outer ring

MOUNTSHAFT018C

Manaras Limit Shaft Kit MGH Pre-2011 up to 1.5HP

For MGH pre-2011 up to 1.5 HP

115921-01

Wire Harness 66" long

Used on Rite-Hite dock leveler

18211

Limit Switch LS1 G3M Male

For use with Rite-Hite dock levelers

GH-321-1-CONT

Doorlec Industrial Jackshaft Door Operator 1 HP 230V 1P Contactor Model (Hard Wired)

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

XAC-A

Schneider Pistol Grip Pendant Station Yellow

2 push buttons 1 emergency stop
Coil cord not included

2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

25-42-320

Extension Spring 7' Door - 320 lbs Green w/ clip

Double - Loop
25" long 42" stretch 320 lb load
Sold individually
Rated for 10000 cycles

EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

Q410

LiftMaster Surge Protector K70-51060

Most commonly used with LiftMaster® SL3000 & CSW200 Models.

E402-00-FM

Doorlec Ersce Utility Switch 6A/230V Roller Arm ** Indef. Delivery

Utility switch with a 'NO' and a 'NC' contact
Adjustable arm with roller
Made in Italy

MOD114A

Manaras Synthetic Oil Upgrade Only

This Upgrade Mod. is only available when purchaed with a compatible operator
Synthetic oil is placed in the operator's reducer for improved performance stability and decreased sensitivity to temperature variances

MG00006

Micanan Hex Nut 1/4-20UNC

3 required per operator

EHJW-353-3/4

Doorlec Industrial Jackshaft Op. Watertight ECB 3/4 HP 575V-3Ph

Equipped with: 3-btn control Adjustable Automatic Friction Clutch Emergency Chain Hoist and Heavy-Duty Solenoid Brake.
With DC-2000 controller
Watertight and Dust Tight EEMAC Type 4/12

M7BAR-R10V1-PKG

NICE Barrier Gate Op. w/Heater Arm Package 110VAC

16 to 23 ft Arm Length
120VAC Power Source / 24VDC Operational Voltage
Open/Closes in 6 - 10 seconds
200 Cycles/Hour
Aluminum arm with red adhesive reflector and optional lights/bumper strips
ETL Listed (UL325)

.......more details

K79-13493-2-600

LiftMaster Logic Board Replacement Kit FDCL Firmware Version 600

Replacement board for fire door model FDCL

HCT08

LiftMaster HCTDCU Rail Only for 7'6" Door

Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
Heavy-duty 12-gauge C channel corrosion resistant steel track.
This DOES NOT include the head unit

BCH505L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph L5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

26CW945255

Truck Door Intermediate Panel (15.5" x 98") Painted White for Whiting Dryfreight

These panels are 15.50" height x 98" width.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

8030279

Marantec Replacement Belt with Tab for 8ft Door

Overall Belt Length = 250"
Travel limit tab attached to belt
For Marantec opener models: M4500 M4700 Q7500 Q7700 Q7900 M4500e M4700e M4900e Synergy 260 Synergy 270 Synergy 280 Synergy 360 Synergy 370 Synergy 380 Synergy Solo
Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced

106-0005

Rodent Block Pull Chain Seal 2"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

OSH-6812-ECB-LH

Manaras Opera-SH 1/2 HP 208V 1Ph with Electronic Circuit Board Left hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

106-0006

Rodent Block Pull Chain Seal 2.5"

Often overlooked and left unprotected the opening for the pull chain on dock levelers is an ideal entry point for mice and rats.
The chain provides a built-in ladder for pests and the chain opening is more than big enough for rats or mice to squeeze through.
Features solid cast aluminum construction easy to install and completely cover the chain opening.
The seals are designed to sit completely below the surface of the dock plate and will not interfere with material handling equipment.

GH-383-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

Overhead compatible full-size transmitter

CP-SH-58-1038-LS

Lynx Limit Shaft Only

5/8" x 10-3/8"
Used on most of Lynx operators

R5213

Bearing Flangette Retainer Only Standard

Does not include bearing
For use with all C16-32F and C20-32F
Steel Zinc plated finish

MB-01007

Micanan Electric Motor Only 1/2HP 220V 1PH

Limited duty motor
Used on Micanan's LT LJ LH LHA

K001-KEY

Replacement Key for 3BXLT Key #1

Replacement key only for key #K001

14-1002

PVC Roll 8" x .120" Standard Smooth 200' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

3BXT-BLACK

Replacement Button/Switch Only - Black

Replacement button for 3BXT

16-8001

LiftMaster Cogged Vbelt 4L 34"

This is a replacement Belt (4L340).
Compatible with LiftMaster® Model BG770 Barrier Gate Operators.

IRB-325-HD

EMX Industries Steel Protective Hoods Only Grey Powder Coat Set of 2

Protective Hoods for the Thru-Beam Photo Eye System (Item #IRB-325) by EMX
Easily installed using the existing mounting holes of the Photo Eye
Constructed of zinc plated steel
Grey powder-coated finish
9" x 3"

XBA8

NICE Apollo Red/Green Internal Traffic Light Module

This module makes your barrier shine red and green signaling oncoming traffic when it is safe to pass through the barrier. Designed for M-Bar and L-Bar barrier gate operators.

41D0277-2

LiftMaster Transformer WiFi Non-Battery Backup

For Wi-Fi models without BBU garage door openers; manufactured after 2011
Same as #204D0277-2

41D8257

LiftMaster Cover Only for 8550W

One piece cover is compatible with LiftMaster Model 8550W Elite Series

74183

Marantec External Gate Receiver 315 MHz

Upgrade your existing gate operator to be compatible with Marantec controls such as transmitters and keyless entry systems.
315 MHz operating frequency
HomeLink compatible
Very easy installation (follow wiring diagram of gate operator)
Compatible with other operator brands

510.2543.00

Whiting Narrow Mounting Angle for Posts Under 2-1/2" IN

This is an upcharge when ordering certain doors

41D0233-3

LiftMaster End Panel WiFi Logic Board

CP-PW-NM-34

Lynx Pocket Wheel for HDC

EHJ-311-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 115V-1Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

MEFF-PAIR

Miller Edge Funny Flaps for MC22 Sold as a Pair

Funny Flaps for use with the MC22 Sensing Edge and are a great fit for an application where extra sensitivity is needed
They're necessary to fill the gap between the edge and guide within the sensing edge system and their flexible durable construction offers an alternative to more rigid standard sensing edge setups.

LOTBINIERE-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Lotbiniere design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

URBAN-MR-R16

Garex Ready to Install Door Special Order

R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration