Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carwash
CDJH-34-115-CON-R

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
  • 24 Volt accessory power
  • On board (372 MHz) receiver capable of programming up to 20 transmitters
  • External receiver connection
  • NEMA 1 Electrical enclosure
  • Adjustable friction clutch
  • Maximum Output Revolutions - 45
  • Primary Drive: Heavy Duty 4L V-Belt
  • Secondary: #41 CHAIN / SPROCKETS
  • Output: #50 CHAIN / SPROCKETS
  • 32 RPM output shaft speed
  • Door speed determined by the door system installed
  • Standard sprockets: Sectional: 50B12 x 1” bore to 50B18 x 1” bore OR 50B18 x 1 1/4” bore Steel Rolling: 50B12 x 1” bore to 50B24 x 1 1/4” bore
24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

  • For Stanley Chain/Cable Openers Only
  • Not for Stanley Full Chain Openers
  • Replaces Part #920-0147
PTM-24V

EMX 7 Day Programmable Timer 24V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
10.1003.11

Whiting Step Bolt 1/4"-20x 1-1/2"

  • Used with keps nut #796 - sold separately
  • Ideal for installing hinges on dry freight doors
LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

  • HID 26 Bit Format
  • 125 kHz
  • Sold in Lots of 100 - Price Shown is Price per Card
  • Small enough to fit on a key ring
  • Universal compatibility with HID proximity card readers
  • Provides an external number for easy identification and control
    • .......more details
CP-PW-NM-34

Lynx Pocket Wheel for HDC

PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

  • R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
10RD900

BEA Receiver Module 900 MHz

  • Long range receiver to allow for wireless activation of any door control.
  • Provides greater line of sight transmission distance than legacy wireless frequencies along with providing better penetration of obstacles.
  • Voltage: 12 – 24 VAC / VDC
  • Operating temperature: -10 to 55C
Product guide
DMB51CM24

Carlo Gavazzi Mini Multifunction Timer

  • Mini DIN Rail Mount Multi-Function Timer
  • 24VDC and 24-240VAC/DC Supply Voltage
  • 0.1 Seconds to 100 Hours Timing Ranges with Six Sub-Ranges
  • Diagnostic LEDs
  • Only 17.5mm wide
K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

  • Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
  • This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
  • Will also work on L3 L4 operators
F400-1

FAAC 400 Hydraulic Swing Gate Operator Kit 115V dual swing gate

  • Kit includes: 2 FAAC operators 2 internal stops 1 control board 1 enclosure 1 photocell pair 2 copacitors 1 transmitter and 1 receiver
  • Max Gate Length: 16
  • Max Gate Length w/ External Lock: 23
  • Maximum Force Output: 1740
  • Duty: Continuous
  • Cycles Per Hour: 80
    • .......more details
LMTBUL

LiftMaster Monitored Through Beam Photo Eye w/ Heater Nema 4X

  • Tested and evaluated by UL and meet UL 325 requirements.
  • Long Range powerful beam provides reliable performance.
  • Sensing distance up to 90 ft.
  • Anti-Fogging Lens
  • NEMA 4X rated
  • Wireless network mode eliminates the need to wire between operators in dual-gate applications.
    • .......more details
Installation manualManuel d'installationProduct guide
E/BLOP/151

Automatic Systems Safety Edge for BL229 16'-5"

328-729

Lip Shock Absorber Dock Leveler

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
1004-2-14'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 14 ft***Actual Length 14'2"***

  • For door thickness 2"
VS-GSLG-723

Linear Industrial Duty Variable Speed Slide Gate Op. 2 HP 230V 3 PH

  • Up to 24" per second gate speed
  • Max gate length: 100 ft
  • Max gate weight: 4000 lbs
  • Integral APeX Controller
  • Soft start/soft stop
  • Programmable speed control
    • .......more details
Installation manualSpec sheet
50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

  • Open / Close with On / Off Key Switch Nema 4/12
  • Green - Open Black - Close
MT22-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
K32-11009

LiftMaster Gear Reducer 45:1 1/3-1 HP

  • Same as: 3211009 3290011 32-11009
  • For use on 3-horsepower 45:1 LiftMaster GH (gear head) commercial garage door operators
10.1002.3

Truck Door Rivet with Splines 1/4" x 1" Steel

  • Mild steel construction
  • Round head design 3/4" head
  • Standard hinge rivet
165917

Marantec Wireless Wall Station

  • This device is compatible with any Synergy garage door operator as well as MLine openers with a 315MHz frequency
  • Program any button to operate the light function.
  • Completely wireless.
  • Extremely secure multi-bit code technology allows for an unlimited number of Marantec wireless wall stations.
  • Operate up to 2 Marantec garage door openers or other external devices.
  • Includes 3-volt lithium battery.
    • .......more details
H-0166

Autogate VBelt Banded B-59

  • New Style Double Reduction
MW00024

Chain Tensioner for 1"-1" Shafts Inside the Box

  • Chain spreader for installation with 1" operator shaft & 1" door shaft.
  • Includes 2 shaft collars and set screws.
CAP425

Capacitor 125VAC 425MFD

  • Motor Start Capacitor 125V 425 MFD
DW-TR-200

Fraba Wireless Air Wave Switch Transmitter Only

  • Includes transmitter DWTR-200 433 Mhz only
  • A small radio transmitter and the pneumatic switch are packaged within the DW3S-200 case does not come with copper end
  • Comes with battery (CR2)
Operating Instructions
PRO-GJ-5011R-RH

Micanan 1/2HP 115V 1P Gearhead Operator with Mechanical Contactor

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • 1/2 HP high starting torque instant reverssssible motor
  • #41 roller chain drive & 41B19 operator drive sprocket
  • Emergency floor level disconnect for manual operation
    • .......more details
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

  • Same as #2-30-1
MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
COUPLER-LJ-OHD

Coupler Love-Joy for Overhead Door

MW-00232

Micanan In-Line Torque Clutch Assembly Modification

  • Clutch is mounted in between motor and reducer flange
  • Overall length of operator increases by 3.85"
  • For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp
LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

IS40

BEA Industrial Sensor Dual Technology Presence Detection BEA-10IS40

  • Dual technology sensor combining presence and motion detection in industrial applications.
  • Bidirectional unidirectional approach and unidirectional depart microwave detection options. Six modes of detection filtering and 9 uniqueinfrared patterns for highliy flexible presence detection.
  • Up to 7 minimum object targets
  • Adjustable infrared immunity modes to mitigate environmental disturbances (vibrations light and sun)
  • Mounting height: 8'-16'
  • NEMA 4
    • .......more details
Installation manualSell sheetCut sheet
PRO-HB-5021U-RH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
  • On-Board receiver holds up to 20 transmitters
81600

LiftMaster 81600MC DC Chain Drive Wi-Fi Bluetooth

  • Safeguards garage access by sending a new code with every click.
  • PosiLock® electronically protects against forced openings.
  • Alert-2-Close signals when a door is being closed by MyQ®.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Customized DC Motor is purposefully designed and built to last.
  • Chain Drive system for steady performance and industrial strength.
    • .......more details
Product guideGuide de produit81600 Installation Manual81600 Manuel Installation
FA-NHEX-58-18-J

Lynx Jam Nut 5/8-18 for MCJH

PRO-H-5021-U-RH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
  • On-Board receiver holds up to 20 transmitters
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
K71-D3PH

LiftMaster Drum Brake Kit 3 Ph 208/230/460V (Late Model Logic 5 Shoe and Drum Models)

  • Internal Solenoid Drum Brake with Cable Replacement Kit.
  • Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
  • Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
  • Quiet preferred sound profile
  • Industry benchmark stopping performance with adjustability
  • Significantly reduced modes of failure
    • .......more details
Installation manualManuel d'installation
MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming instructions
MK-00043

Micanan Overload Reset 1-Phase 15 Amps

MK-00036

Micanan Overload Reset 1-Phase 7 Amps

MK-00032

Micanan Transformer 460V-24V-40VA

MW-00020

Micanan Splash Proof Cover Fully Assembled T TB SD

  • Splash proof cover for models: PRO-T/TB
  • Same as MP00251
MM-00334

Micanan Bearing Support Plate for 5HP PRO-GH (Reducer 120)

MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

  • Provides added strength to the belt drive system
MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

  • Flush mount
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
RELAY068

Manaras Relay SPST 24VDC

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
CAPCELL

LiftMaster Cellular 4G/LTE Modem with Wifi

  • Connect CAPXL and CAP2D Anywhere: compatible with SIM cards from most carriers.
  • Sign up with your preferred carrier or add on to your current plan.
  • Avoid trenching and wire pulling for speedy installations.
  • Eliminate plain old telephone service (POTS) and improve reliability.
  • Compatibility: At&t® Verizon® T-mobile® Bell® Rogers™ Telus®
  • Capacity: Connect up to 4 wired or multiple Wi-Fi devices
    • .......more details
MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
10-10190

LiftMaster Brake Release Lever

  • Replacement lever for model SD
LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
ME00010

Micanan Input Shaft PRO-J 3/4" x 11-9/16"

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

  • Rubber tubing
BB-1

Rubber Button Cover Black for 3BLM PBS

  • Rubber button cover only
RCB-TIP

Roller Chain Break Replacement Tip Only

  • Replacement tip only for RCB-2560
108135.0003

Overhead Serpentine V- Belt for JST 26"

  • Overhead Door commercial garage door opener serpentine belt 108135-0003 included in the "speed-up" kit for sidemount only
  • Type "J" 26"
K1D8387-1CC

LiftMaster Expansion Board UL325

  • Compatible with various LiftMaster® DC Swing and Slide Gate Operators; manufactured after 2016.
  • This board is backwards compatible for older second generation units but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors.
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

VWS-34-SANDSTONE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Sandstone

  • Pan head
  • S point
BL229-EX1929/G45

Automatic Systems Rising Barrier Gate with 14'9" Round Arm

  • Orientation of the arm (right or left) must be specified when ordering
TRACK-GUARD-72

Track Guard 72" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5094 (right) and 60-5095 (left) sides
    • .......more details
DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

  • Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
  • This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
  • Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
  • Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
  • A wide selection of colors to choose from
  • Made to Order
    • .......more details
RB741

Linear / GTO 1-Button Transmitter 318 Mhz

  • Standard transmitter included with all GTO gate operators
  • Much smaller in size than previous model and improved signal range
  • The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
  • It is compatible with GTO and Mighty Mule gate operators
  • The code settings are the 9 dipswitches located inside the cover.
  • Measures: 2-1/2 H x 1-1/2 W x 9/16 D.
    • .......more details
50183

Doorlec Brake Assembly 575V

  • Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
  • For all V-belt driven models that have brakes
25C20

LiftMaster Screw Drive Coupling K025C0020

BUSHING055

Manaras Limit Shaft Bushing

178516

Hand Chain Tensioner Universal Bracket Torque Force

  • Floor mount
  • Includes chain keeper with clip #181745
  • For use with all Torque Force chain hoists
Instruction sheet
37348R

Genie Closed Confirm Remote 915 MHz GLR-BX

  • Beeps and flashes green when garage door closes.
  • Gives warning tone and flashes red when garage door does not close properly
  • Compatible with Models 4064 3064 4024 and 3024 only.
  • Works with Genie TriloG™ IntelliG® as well as Revolution Series models PowerMax® SilentMax® and ChainMax™ garage door openers
  • Requires a Genie Network Adapter
  • Sleek and compact design
    • .......more details
Programming instructionsInstructions de programmation
MX00002-110V

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Outside - Old Style

  • Replaces MX00140-110V
ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

  • 10 pieces of 10ft per bundle.
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
10FT-CHAIN-LDO

Linear 10ft Chain T- Rail for LD050/LS050/LDCO (HCT10C)

  • 10ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
LITH-9V

Battery 9 Volt Lithium

36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
12124

Doorlec Coupling 2-3/4" x 1"

  • Used on model SGP
MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
    • .......more details
Installation manualSell sheet
109435.0001

Overhead Limit Switch

42413

Pillow Block Bearing Housing Set GP-3

  • Can be fitted with bearing # 28301
38C

Skylink 1-Button Universal Remote ***NLA

  • Easy to carry or clip on sun visor.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • Programmed to work with constant pressure to close
TRACK-3"-RAW-14

Raw Vertical Track 3" 14'-0" Sold per Piece

CP-MO-34-1231WP

Lynx Electric Motor Base Mount 3/4 HP 110V 1 Ph TEFC

  • Electric motor only
50195

Doorlec Front Idler Assembly with Shaft Trolley Models

  • Fits all Doorlec commercial trolley operators
  • Same as # 50190
02-103-FR

Push Button Station 3-btn Surface Mount French Nema 1 Metal Housing

  • PBS-3S
  • Ouvre-Ferme-Arret
  • Momentary contact
  • Metal enclosure
  • Nema 1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
    • .......more details
T-931-MH

FL-Heddolf 1-btn Mini Transmitter P219-1K-311 MHz (New # T-931-MS)

  • Keystone-Heddolf miniature 1 button transmitter 311mhz
  • 12 volt battery and keychain included
  • (9) 3-position dip switch format
  • Compatible with Keystone T-931-H and Allstar T-931 and T-931-M
Programming instructions
02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

  • PBS-3
  • Open-Close-Stop
  • Momentary contact
  • Nema 1
  • Works with Liftmaster MH commercial operator
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
    • .......more details
MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

  • Heavy-Duty spur gear chain drive trolley
PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Non-Monitored board NO photocells
  • On-Board receiver holds up to 20 transmitters
.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
37558R

Genie Belt Drive Sprocket Assembly

  • Complete assembly for the belt sprocket on top of the machine.
  • Works with the following models: IntelliG 1200 and IntelliG 1000
GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

  • 390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
  • Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
  • Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC