Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: Two 2032 batteries
  • Codes: Custom block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.6" W x 4.2" H x 0.8" D
  • Same as: ACP00722
  • Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
MX00145

Micanan Brake Assembly for PRO-APT Solenoid NOT included ** DISC

  • Discontinued. Use part number MX00140
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
R5995

Shaft Collar 1-1/4" Double Split

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
  • Compatible with DJ J operators
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

157370

Decorative Lift Handle Yorktown Style 8-3/4" Stamped Steel Sold per piece

  • Black Stamped Steel
  • Also known as Spade Style
  • Mounting hardware sold separately
  • Priced per each
CB18A500-KOR

Cable 1/8" 7x7 500' Galvanized Supreme

  • Galvanized cable 1/8" 7x7 500ft spool.
  • A higher quality cable than the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
K20-1075B-2P

LiftMaster Electric Motor 3/4 HP 115/230V 1Ph Contactor Model

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

  • 9 dip switch 315MHz transmitter
  • Compatible with Commercial operators L3 & L4
  • Visor clip and battery included (GP23A)
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
S142ARNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
  • .......more details
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
11-10987

LiftMaster Clutch Shaft for MH

14JW

Rolling Steel 3" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
342.115-CUT

Whiting Intermediate Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer must specify exact length required
340.115-CUT

Whiting Top Panel Tongue & Groove 11-1/2" h Cut to Exact Length

  • Primer only
  • Customer to specify exact length
GH501-L5

LiftMaster Gearhead with Brake 1/2HP 115/230V 1P L5 ***No Longer Available

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
  • .......more details
SL532COP

Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST532COP
.343-3-3/4-RH-C

Torsion Spring .343 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 6" Length: 12 ft
.312-3-3/4-RH-C

Torsion Spring .312 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.306-2-5/8-LH-C

Torsion Spring .306 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 2-5/8" Length: 12 ft
.283-2-LH-C

Torsion Spring .283 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

  • For the Miracle-One single arm gate operator
  • Same as part no. K74-50271
LEVER056

Manaras Disconnect Lever

  • Works on newer model MJH
ME00028

Micanan Input Shaft Heavy-Duty

790

Fasteners Hex Nut 3/8-16 1000/Box

29-31229

LiftMaster Relay 24VDC 30A SPDT 1-Phase only

  • C-relay for model T operators 10A
915007048X

Extension Cable 1/8" 7x19 14' Sold as a Pair

  • Cable assembly for extension spring door - looped on one end the other is raw (no stops)
9150000670

Extension Cable 1/8" 7x7 14' Sold as a Pair

  • Cable assembly for extension spring door - looped one one end the other is raw (no stops)
1104-16FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 16' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-14FT-GREY

Residential Side & Top PVC Weather-Strip with cap 14' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
71-65WTC

LiftMaster Weatherproof Case (71-65WTBOX)

  • Optional weatherproof case suited for 412LMC 422LMC and 423LMC
  • Measurements of the interior: W=5.75" L=7" D=3"
  • Measurements of the exterior: W=7" L=10" H=3.5"
SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

  • Wireless RF Digicode® keypad.
  • Frequency: 433.92 MHz.
  • For automatic door opening in sequential mode.
  • 6 channels to control 6 different relays or 6 different RF receivers.
K-73BG770-3311

LiftMaster Service Kit E-Box for BG770

MDT-4A

Linear 5-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • .......more details
02-401

Push Button Control Station 1-Button Surface Mount NEMA 1

  • Die-cast metal enclosure
  • START may be used as OPEN with all LiftMaster operators.
  • May be used as OPEN and CLOSE on all operators with type B2 control wiring
DS-KIT

Linear Single Delta Radio Kit ** Discontinued

  • Kit includes one DT transmitter and one DR receiver
  • Same as: DNP00011
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
  • .......more details
41A7756

LiftMaster End Panel with Light Socket for 8557

.243-134-R

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
2806.139*140

Whiting Spring Assby .139 x 2-3/16 x 14" L Roadside

  • Replacement torsion spring with cones for Whiting Door Serial # 138631
  • Specs: .139 x 2-3/16" x 14" Long
  • Roadside
  • For Curbside order part # 2807.139.140
7001-12-W/B

Commercial Side & Top Weather-Strip 12' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

  • Wire size: .421
  • Inside diameter: 6"
  • Length: 12 ft
.363_6"-LH

Torsion Spring .363 x 6" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.319_5-1/4"-LH

Torsion Spring .319 x 5-1/4" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.283_5-1/4"-LH

Torsion Spring .283 x 5-1/4" x 12ft LH White

  • Wire size: .283
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.363_3-3/4"-LH

Torsion Spring .363 x 3-3/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.343_2-5/8"-LH

Torsion Spring .343 x 2-5/8" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.243_2-5/8"-LH

Torsion Spring .243 x 2-5/8" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2"
  • Length: 12 ft
.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.262_1-3/4"-LH

Torsion Spring .262 x 1-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.437_6"-RH

Torsion Spring .437 x 6" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 6"
  • Length: 12 ft
.468_6"-RH

Torsion Spring .468 x 6" x 12ft RH Blue/Orange **NLA

  • Wire size: .468
  • Inside diameter: 6"
  • Length: 12 ft
.283_6"-RH

Torsion Spring .283 x 6" x 12ft RH White

  • Wire size: .283
  • Inside diameter: 6"
  • Length: 12 ft
.437_3-3/4"-RH

Torsion Spring .437 x 3-3/4" x 12ft RH Red/Green

  • Wire size: .437
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.262_2-5/8"-RH

Torsion Spring .262 x 2-5/8" x 12ft RH Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
2705.162_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.162*180
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
7176.225_31.93

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 93"

7176.225_31.910

Whiting Heavy Duty Torsion Assembly .225 x 31" shaft 91"

1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1019-1-3/8-10'

Rigid Vinyl Bottom Retainer Flat 10' Long

  • Black - for door thickness of 1-3/8"
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-12'

Rigid Vinyl Bottom Retainer Notched 12' Long

  • Black - for door thickness of 1-5/8"
1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
27-20200

Truck Door Winding Plug for Todco Roll-Up Doors

  • Cast aluminum construction.
  • Provides easy method to adjusting spring tension.
  • Cross Reference: T #59158 T #51041 W #4050 340100
26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

  • These panels are cut to an extra wide width to fit wider vehicle applications
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • .75" thick 7 ply exterior grade medium density plywood
  • Primer finish
ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

  • For model PRO-APT
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

41D8198

LiftMaster End Panel with all Labels and Light Socket

  • End panel works with various models
25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

  • Steel construction Black E-coat finish
  • Attaches to bottom panel for roller support
  • Shaft cover for 1 stud
  • Cross Reference: W #1021
70.32

Whiting Stainless Steel U-Bolt 1-1/4"

  • Sold per U-bolt
2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

  • Torsion spring wire only
  • .192 wire size
STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

  • 2 N/O contacts and 1 N/C contact for stop.
  • Flush mount.
GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

  • Wire size: .295
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Includes solenoid
SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

  • BY PASS Board for 1150051
  • Same as KSN1600341B
10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

  • Stainless steel construction
  • Round head design 11/16" head
1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 5-1/4" Length: 12 ft
PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
SF600S-RIGHT

Spring Fitting 6" Pair Stationary + RHW 1" Shaft

  • Cones for 6" ID Right Hand Wound spring wire
  • Not universal thread
.343-6-RH-C

Torsion Spring .343 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 6" Length: 12 ft
41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

  • For model: 8550
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)