Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K07-8064

LiftMaster Lower Crank BG790

Also known as: G078064 07-8064

2376.162.18.870

Whiting Torsion assembly .162 wire size 18" spring length 87" shaft

2376.177.25.930

Whiting Torsion assembly .177 wire size 25" spring length 93" shaft

GHX-353-3/4HP-LH

Doorlec Explosion Proof Gear Head 3/4 HP 575V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

K1D6686CC

LiftMaster Expansion Board CSL24V

This is a replacement CSL24V Expansion Board
For use with various LiftMaster® Slide and Swing Gate Operators

10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

Standard rivet used for installing #7515 Keeper
3 rivets are required per keeper

O04R2009

AirLift Bracket Horizontal 20" Flat Bar

GH-RSF

Gear Head Rolling Steel Hood Mounting Plate

1/4’’ steel plate painted with a black oxide finish

2376.192.34.930

Whiting Torsion assembly .192 wire size 34" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

EHJ-353-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 575V-3Ph

Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

G3353

GDI Chain Per 2 ft Length

If over 10' loop length is required

610.5600.3

Whiting Panel Option for Stainless Steel 5600.3 HD Bottom Roller Brackets

This is an upgrade option when purchasing a door or bottom panel

K10-3515

LiftMaster Retainer Guide

Also known as: 10-3515 G103515 103515
For use with LiftMaster® Models SL580 & SL590 Commercial Slide Gate Operators and Perimeter Access Solutions

O22R1004

AirLift Operator Install Kit

HYBRID-BLK-16

Residential Side & Top PVC/Aluminum W/S with cap 16' Long (193") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

41A6288

LiftMaster Work Light Hardware Kit

K72-12564

LiftMaster Output Shaft Kit H Prior to 2005

Also known as: 308116010 308116010HK

N4GH751L5-RH

LiftMaster Gearhead N4 w/Watertight/Oiltight Mod. and Brake 3/4HP 115/230V 1P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

3 Button station (NEMA 1)
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

K20-1150C-2LP-H28

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph L5

For use with various LiftMaster® Logic 5.0 Gear-Reduced Door Operators
Also known as: 20-1150C-2LP K20-1150C-2LP K20-1150C-2LP-H24

41D8257

LiftMaster Cover Only for 8550W

One piece cover is compatible with LiftMaster Model 8550W Elite Series

2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 23" Long
Roadside
For Curbside order part # 2807.177*230

K75-32268

LiftMaster Electrical Box Cover L3 **DISCONTINUED

2376.206.30.870

Whiting Torsion assembly .206 wire size 30" spring length 87" shaft

11-10014

LiftMaster Clutch Shaft

Commercial door opener clutch shaft
11 7/8" Long; 1/2" Wide

CGH103L5-RH

LiftMaster Gearhead w/ Brake and Carwash Mod. 1 HP 208/230/460V 3-Phase Logic 5 Right Hand

Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
Security+ 2.0®
Includes CPS-UN4

K75-19978-L

LiftMaster Frame Plate Kit Left Hand Disconnect

For use with various LiftMaster® Hoist and Jackshaft Commercial Door Operators

.25W8.2

Resistor 1/4 W 8.2K OHM

Dimensions (W X H X L) 6 X 15 X 3 CM

K77-19130

LiftMaster Hardware Kit LA400 LA412

LMPK2-SN

LiftMaster HID ProxKey III 1346 - Sentex Price Per Card ***NLA

Universal compatibility with HID proximity card readers
Provides an external number for easy identification and control
Pocket size key fob
HID Sentex 30 Bit Format
125 kHz
Sold in Lots of 100

.......more details

SHAFT120

Manaras Input Shaft for OSHW

K20-3050C-4P

LiftMaster Electric Motor 1/2 HP 208/230/460V 3Ph L3 L4 L or M

Standard 1/2 hp motor
This is a replacement Motor Kit (1/2 HP 230/460V 3PH CF)
For use with various LiftMaster® Three Phase Gear-Reduced Commercial Door Operators and Slide Gate Operators
Also known as: 6002242 K20-3050C-4 203050 K20-3050C4 20-3050C-4 203050C4 20-3050C-4P

MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

Installed to control auxiliary device

2376.177_25.900

Whiting Torsion assembly .177 wire size 25" spring length 90" shaft

PRO-APTC-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

2807.171.200

Whiting Spring Assby .171 x 2-3/16 x 20" L Curbside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 20" Long
For Roadside order part # 2806.171.200

26CW94623-CUT

Truck Door Top Panel Painted White (13" x Cut-to-Size) for Whiting DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
Non-routed
.75" thick 7 ply exterior grade medium density plywood
Painted white

GOFF-G2-LITE-3000

Goff High Performance Door Made to Order

Custom made to spec

1004-134-10'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 10 ft**Actual Length 10'2"***

For door thickness 1-3/4"

.421-6-R-C

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-334-R-C

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-514-R-C

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.295-334-R-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.283-2-L-C

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

218759

Torque Force Spring Failure Device 1-1/4" Shaft Right Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

2705.206_325

Whiting Curbside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

2376.206.325.910

Whiting Torsion assembly .206 wire size 32-1/2" spring length 91" shaft

PRO-H-7538-U-RH

Micanan 3/4HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7543-U-LH

Micanan 3/4HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5038-U-RH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5043-U-RH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

MK-00039

Micanan Overload Reset 1-Phase 10 Amps

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

50740

Doorlec On/Off Switch 575V 3Ph Gate Op

20amp

.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

ME117-C7

Miller Edge PVC Mounting Channel Sold by the Foot

PRO-LJ-5011-U

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

PRO-GT-10023-U

Micanan 1HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

LB1012-14

Laminated Bumper Standard Black 12" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.
This model has angles on both sides

.......more details

LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

41A4371

LiftMaster Belt Cap Retainer

Same as 41C4371

2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

Replacement torsion spring with cones
Specs: .139 x 2-3/16" x 13" Long
Roadside
For Curbside order part # 2807.139.130

41C5497

LiftMaster Wiring Harness Kit High Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

PRO-GHB50053-PNL

Micanan 5 HP 575V 3 Ph Gearhead with Brake No Controls

Special Order only
No controls in operator- separate panel is required

9004-08

Excalibur Threshold Kit 8'2" x 4" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-3/8"

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

Same as: 195105 19-41119MB 19-4119M 1941119M

.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

7001-8-BRONZE

Commercial Side & Top Weather-Strip 8' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

2376.206.30.930

Whiting Torsion assembly .206 wire size 30" spring length 93" shaft

2376.156.17.770

Whiting Torsion assembly .156 wire size 17" spring length 77" shaft

AW12K500-18

Miller Edge Air Wave Kit 18ft No Coil Cord

Kit Includes: AW12 Air Wave Switch Barbed Coupler (18') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs

26CW945255-CUT

Truck Door Intermediate Panel (15.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

MP00064

Micanan Track and #41 Chain for 12' h Door *Actual length 174"*

For 3/4 & 1 HP Micanan trolley operators

MD00422

Micanan Lovejoy Rubber 3JE Sleeve

2806.192.340

Whiting .192 x 2-3/16 x 34" Roadside with Cones

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

2376.200.30.890

Whiting Torsion assembly .200 wire size 30" spring length 89" shaft

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

111537.0001.S

Overhead Sprocket 38T 1/4P

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

111914.0002.S

Overhead Sprocket 28T 1/4P 501 D-Bore

Sprocket for the limit shaft
For the 1/2 hp 3/4 hp & 1 hp hoist RHX operator.

2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

K75-34824

LiftMaster Chain Guard Kit for SL575GL SL585GL SL585U slide gate operators

Complete with: Chain Guard Chain Guides and Retainers.
Works with SL575GL SL858GL and SL585U

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

Cold weather package includes: Arctic oil Heater Cogged V-belt

2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

Cold weather package includes: Arctic oil Heater Cogged V-belt

PRO-HBH10011U-R

Micanan 1 HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login