Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Black
26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

  • Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size
SELECTOR-BTN-8L5

Devanco replacement rotating Black button for 8L5-OCS

  • replacement black button but for rotating 8 position selector for 8L5-OCS
DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

  • Fraba DW3S-300 air switch 10008797-2
  • Normally Open Contact (NOC)
  • Screw Type Connector
  • Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
  • Housing: ABS Switch: PA6V0 Nema4
  • Normally Closed Contact achieved by adjusting the sensitivity screw
    • .......more details
Operating Instructions
PS12D2A

LiftMaster Passport Power Supply Plug-In 12VDC 2A (02A1699-1/ ST122A)

  • Same as #002A1699-1
41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

  • Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
  • Compatible with Liftmaster 2575 3275 3575 and 3575S models
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-375-Installed
.295-514-R-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-514-INSTALLED
4X4PO50

Devanco Loop 4' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

  • For springs 2" up to 6"
  • This device can be applied on Industrial OH doors that are manual or motor operated
  • Must be installed on a keyed shaft
MP-00025

Micanan Auxiliary Chain Hoist for Jackshaft Op. / PRO-J (SCHAUX)

  • Allows for operation of a door by an auxiliary chain hoist.
  • Used primarily on center mount applications
821LMB

LiftMaster MyQ Garage Universal Smartphone Garage Door Controller Second Generation *** To extent of Inventory. Repl 821LMC-S

  • Enables smartphone control of most major brands of garage door opener with photoeyes.
  • Includes Wi-Fi hub and door sensor
Sell sheetBrochure
SMF5005

Adjust Holdown Assembly With Internal Float ** Price by Quote

  • Ratchet Bar Not Included
  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels are routed and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.
    • .......more details
MM-00035

Micanan Chain Keeper

MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

  • 2 required per machine
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
1104-7FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
50440

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 4 / 12

  • Surface Mount
  • Dust-proof EEMAC 12 and 4
41B0873

LiftMaster Safety Sensor Sunblocker Kit Works With 41A5034 and 041-0136

  • This complete kit is used to shield sunlight and prevent accidental reversal of garage door from sunlight shinning directly into the safety sensors
  • Works with 41A5034
  • Same as: 041B0873 41B873
DOCK-SEAL

Special Order Dock Seal Price by Quote Only

  • Made to order Models R-100 R-600 & R-700
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
  • Custom Logo available
    • .......more details
R-100 order formR-600 order formR-700 order formCatalogue
16-8002

LiftMaster Cogged Vbelt 4L330

  • Fits BG790 barrier gate opener
M6-18

Molded Rubber Bumper Black 18" L x 10" W 6" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.
    • .......more details
PRO-HB-5053U-RH

Micanan 1/2HP 575V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
TRACK-GUARD-24

Track Guard 24" Tall Safety Yellow With Base Sold as a Pair *** NLA

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5090 (right) and 60-5091 (left) sides
    • .......more details
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
TRACK-3"-RAW-24

Raw Vertical Track 3" 24'-0" Sold per Piece

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
.273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Orange/Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.312-6-L

Cut-to-Length Torsion Spring .312 x 6" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
SPRING-DUPLEX

Special Order Duplex Spring Assembly

  • Customer made to required size
K1D6761-1CC

LiftMaster Logic Board AC

37222R

Genie Series III Deluxe Wall Console

  • 3 function wall console for use with IntelliG™ and TriloG™ openers.
  • Same as GBWC-BX
  • 3 function console operates door opener controls lights and security lock out switch.
  • Not compatible with Series II
732

Fasteners Flat Washer 3/8" SAE 1" OD Zinc 1000/Box

  • 7/16" ID x 1" OD x 5/64" thickness (ID: 0.4375’’ OD: 1’’ THK: 0.084’’)
MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

  • Designed for use on commercial sectional doors with high or vertical lift
  • May also be used on small rolling grilles with max. 15 cycles per hour
  • Includes chain hoist
  • Includes solenoid brake
  • No longer available in contactor model (2017)
Installation manualSpecification sheet
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 562
  • Reverse side is #431 Bright White
Colour chart
BOLT027

Manaras Hex Bolt 3/8-16 x 1-1/2"

  • Used on old MJH
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
Comparison charts
CPS3CARD

LiftMaster Option Card Only (41K0811)

  • Works with all commercial Logic versions L2 L3 L4 L5
  • Use with CPS-U to add a second set of eyes to the operator
  • Allows activation of Timer-To-Close without CPS-U
  • Simply plugs into Logic board
  • Cut resistors on JU1 & R16 to activate timer feature
  • Same as 041K0811
    • .......more details
19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

  • For 3/4 & 1 HP trolley operators
PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

  • Monitored NEMA 1 enclosure through-beam type photocell
  • 4-Wire
  • Indoor
  • Range: 20 ft
OSH-6112-CONT-L

Manaras Opera-SH 1/2HP 120V 1Ph Contactor Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation manualSell sheet
HTUS

Stainless Steel Garage Door Top Roller Bracket 12-Gauge Single Slot

  • Manufactured with 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Adjustable from 2"-3-1/2"
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Operate LED
  • Visor clip included
  • Sold in lots of 10
  • Power: 9-volt battery
    • .......more details
MI00003

Micanan Pocket Wheel for PRO-H/HB/LH

  • Comes with 3/4" bushing and 2 1/4" spring pins
JDMG-LG-2030

GDI Jackshaft DC 115V

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
Sell sheetTechnical document
32-34792

LiftMaster Gear Reducer Nema 56C 30:1

  • Compatible with LiftMaster® Model SL585 Slide Gate Operators
  • Same as K32-34792
PRO-HBH-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions
SBPFL205-16

Pillow Block Flange Bearing Football Style 1" Bore SBPFL205-16

RELAY024

Manaras Relay DPDT 24VAC

  • Used in all heavy-duty operators as well as MLT and Opera-MH/MJ
97-75005

DOT-C2 Reflective Tape 150 ft x 2" W All White

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
GH4416-05-L

Green Hinge #5 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
K-LA400

LiftMaster Primary Replacement Arm Service Kit for LA400 Original Silver Arm

  • Replacement arm only - no stripes old style
LA400DC

LiftMaster Primary Actuator Arm for Single Gate Applications 12VDC New Version

  • New version has red stripe but will still work on the old LA400
Installation ManualManuel d'InstallationSell Sheet
27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
EP2989

Exhaust Port 5" with latch long barrel ** Discontinued **

  • 5" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

.225-2-RH-C

Torsion Spring .225 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .225 ID: 2" Length: 12 ft
CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Programming InstructionsInstructions de programmationSell Sheet
34516R

Genie Chain Glide Inner Slide ML Series with Magnet

  • For ML Series with Magnet: 350ML 500ML 700ML 800ML
1A4324-EZ

LiftMaster Steel Hood EZ Mount Bracket with Adaptor Plate (75-12362/ 001A4324)

  • Heavy-gauge steel bracket with EZ mount adapter plate mounting bolts nuts and washers.
  • Adapter plate holds mounting bolts in place for ease of mounting.
  • Cannot be used with Model GH 3HP.
37408

Doorlec Reversing Contactor BF9 120VAC

TR490

Waist-High Pedestrian Tripode Turnstile with Heater & Pictograms

  • The TR tripod turnstiles are very robust products that can function equally well inside and outside buildings.
  • They are particularly well-suited to the needs of access control at leisure centers stadiums and factories.
  • Well-built for increased durability tripod turnstiles efficiently control high throughput.
  • Bi-directional turnstile made especially for quick access control in areas with high traffic but limited space
  • Non-removable stainless steel arms to prevent vandalism
  • Durable corrosion-resistant heavy-duty mechanism for extended service life
    • .......more details
766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

  • Full length thread
  • Max torque = 6
STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
Programming InstructionsSell sheet
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
TH827-12V

Erone 7-Day Timer 12V

  • 12V AC/DC input voltage with battery back-up
  • Form 'C' relay
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
Programming InstructionsInstructions de programmationWireless System Chart
1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

  • Fits into the bottom of one-piece 'Stanley' doors.
  • Sold per foot
  • 2" wide
PRO-GH-VFD

Micanan Variable Speed 1 HP 208/230V 3 Phase Operator

  • Variable Frequency Drive Operator
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
L0172-092

Low Temperature Grease 10oz Tube

  • Lubriplate multi-purpose low temperature grease.
  • Excellent cold operating characteristics
8FT-RAIL-CHAIN

LiftMaster 8' chain drive rail 1708LMC - colour code: Blue

  • #48 chain size
  • Price reflects cost if purchased with an opener
CR2016

Maxcell/Renata 3V Lithium Button Cell

.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
DRUM005

Manaras Steel Brake Drum 5/8" - replaces DRUM004

  • Replaces DRUM004
  • Brake drum with edges for current braking systems (2000 - current)
  • Used on all Manaras operators except Gear Head models.
  • Use with BRAKEPART019 (old part BRAKEPART017)
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
2704.162_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long Galvanized

  • Most common torsion spring for cube trucks
  • Specs: .162 x 2-3/16" x 18" Long
  • For Curbside order part # 2705.162*180
298601

Linear Wireless Multi-Code Keypad 310 MHz

  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Easy access to battery
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Installation Manual
MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: 9-volt battery included
    • .......more details
Programming Instructions
RV-300

3" Vinyl Insert for Brush Retainer per foot

  • Color: Black
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
H11G05

Hinge #5 x 11 gauge

  • 11 gauge # 5 hinge - 0.76 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
S-HOOK_SMALL

S Hook #8 Small 1/8" x 1-3/8"

BK050/PR

Residential Bottom Bracket Low Headroom BB-5 LHR Sold as a Pair (L & R)

  • Minimum door thickness 13/16"
  • Gauge: .109 Height: 6-7/16"
  • A pair includes one left hand and one right hand bracket.
25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

  • Steel construction Zinc plated finish
  • Cross Reference: T #69249 T #61352 W #4003 230000
25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

  • Works with both Whiting and Todco doors
  • Aluminum eye ends are used on 5/16" eye cables
  • Cable size: 1/8"
4X16PO50

Devanco Loop 4' x 16' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

BK311

Jamb bracket J-11 #11 12 gauge

  • Sold by the piece
  • Height 4.75" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.