Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Carwash
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
14FT-I-BEAM

LiftMaster 14' I-Beam Rail 3714RV / CD1014

  • I-Beam Chain Drive Rail for model 3595
CR2450

Maxcell/Renata 3V Lithium Button Cell

.262_3-3/4"-LH

Torsion Spring .262 x 3-3/4" x 12ft LH Red/Yellow

  • Wire size: .262
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
LSGRY

Loop Sealant Cartridge Grey 29oz

  • Also available in black (LSBLK)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
71-B575

LiftMaster Interior Mount Brake Assembly 575V

Instruction Manual
41B0139

LiftMaster MVIS Motor Isolators 4/box

03-8024-K

Reversing Contactor 3-Pole

  • Reversing contactor with 24 VOLT coil
  • Dimensions: 3.5" long x 2.25" wide x 2.25" high
  • Telemecanique part # LC 2K09 107B7
T-53-S

FL-Allstar 3-btn 27-Door O/C/S Transmitter 107475-311 MHz ***NLA

  • This remote can control (open-close-stop) up to 27 doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 535T (190-107475)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8"
Programming Instructions
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
.331_2-5/8"-RH

Torsion Spring .331 x 2-5/8" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
PL-BO7-CRGSLIDE

Lynx Carriage Assembly (Nylon) ** No Longer Available

  • Proline / Lynx 455 Plus trolley slide assembly
  • For operators built from 2000 +
T3B-OCS

Lynx 3-btn O/C/S Transmitter 303 MHz

  • Ultra secure mid-size transmitter does not have dip switches.
  • 3 button (Open/Close/Stop)
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Must be used with Lynx OCS receiver for o/c/s functions
  • Visor clip and 12V battery included
Compatibility chart
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart
SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

  • Up to 85 transmitter keys
  • 1 NO relay + 1 NO/NC relay (230Vac)
  • Self-learning memorization
  • Relays with Pulse step or delayed operating mode.
  • Power requirements: 12/24Vac/dc
  • Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)
    • .......more details
Installation ManualWireless System Chart
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
    • .......more details
Sell SheetBrochureWireless System Chart
MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

  • Input / clutch shaft kit for MJH models up to mid-1998
  • Kit includes V-belt 4L360 to fit with newer deeper pulley
  • For MJH built after 1999 use MOUNTSHAFT001A
Drawing
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
DRUM006

Manaras Steel Brake Drum Flat Track - replaces DRUM001

  • Replaces DRUM001
  • Brake drum for all operators except Gear Head models prior to 1999.
  • Use with BRAKEPART018
DOORARM001

Manaras Door Lifting Arm Assembly

  • Complete door arm assembly for all Manaras trolley operators.
RADIO-31

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 4/12 313 MHz *** Repl. by RADIO-RE901B

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 4 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
Programming Instructions - ECBProgramming Instructions - CONT
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
Programming Instructions
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

HAE00013

Linear Turnbuckle Assembly - Chain (HCT)

HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
100BL

1" Light Brush Insert 6ft Long

  • Polypropylene bristles
  • Same as model MS1701
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

  • For use with 1016
Safety data sheet
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1015-1-3/4-16'

Rigid Vinyl Bottom Retainer Raised Centre 16' Long

  • Black - for door thickness of 1-3/4"
1006-1-3/4-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/4"
1006-1-1/2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1003-2-24'

Aluminum Bottom Retainer L-Shaped 24' Long

  • For 2" thick doors.
7001-16-BROWN

Commercial Side & Top Weather-Strip 16' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
RP-3002

Rubber Plug 1/2"

  • To plug end of 3002 gum hose
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
32-48-220

Extension Spring 8' Door - 220 lbs Green ** Replaced by 27-48-220

  • Double - Loop
  • 32" long 48" stretch 220 lb load
  • Springs sold individually
Spec Sheet
27-20308

Truck Door Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W #2523 for #2376 balancer
27-20303

Truck Door Cable Drum and Bearing Roadside (LH) for Whiting Roll-Up Doors

  • Black nylon drum with bearing
  • Cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines Left or Right drum (Left = Red)
  • Cross Reference: 2547
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
26-14325

Truck Door Bottom Panel with Seal (15" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

  • Complete cable locking system for 1-3/8" door.
  • System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.
SF175

Spring Fitting 1-3/4" Pair

  • Universal thread for use in either LH or RH wound springs.
  • A pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .2950".
  • Set screw installed: 3/8"-16 x 1" (2)
  • Fits 1" shaft
  • Winding bar hole 1/2"
    • .......more details
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

  • 6" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
903021ORBG

Operator Reinforced Bracket 21" Galvanized

  • Comes with clevis and clip pins. 24 per carton
6X10PO50

Devanco Loop 6' x 10' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
6X15PO50

Devanco Loop 6' x 15' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
19-48047M

LiftMaster Roller Chain #48x47

  • #48 x 47 pitch with master link
  • Internal reduction chain
  • Length is 24"
108D36

LiftMaster Light Lens (K108D0036-2)

  • Compatible with one light operators
  • Compatible with the following Liftmaster models: 1040 1045 1055 100WD 200WD 1140 1145 1155 110WD 210WD3 1240 1245 1255 215WD 15WD 1240R 1245R 1255R 985 1046 1146 1246 1246R 1056 1156 1256 and 1256R
  • Compatible with the following Chamberlain models: 2000 2100 and 2200
  • Dimensions are 7-1/4" wide X 4-3/4" high X 3" deep
BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

  • Same as BB-6-3 reinforced c/w cotter and clevis pins
  • Use with: 3" straight track
  • Sold as a pair (includes one left and one right).
7FT-RAIL-CHAIN

LiftMaster 7' chain drive rail 1707LMC - colour code: Green

  • #48 chain size
  • Price reflects cost if purchased with an opener
MX00150

Micanan Complete Clutch Shaft Assembly for PRO-HHD

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

  • Sold per piece no box quantity
750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

  • Indented Hex Washer Head
  • 7/16" Head
  • Max RPM = 2000
  • #3 point = long cutting edge (less thread)
RELAY043

Manaras Relay 4-Pole 24VAC

  • Used on Manaras MLJ MLH MLT Models
OPJ-6214-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 240V 1 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
C-24-12-2-BLK-TINT

Thermal Window 24"w x 12"h for 2" Door Black Tinted Grey Glass

  • For 2" thick door
29-31229

LiftMaster Relay 24VDC 30A SPDT 1-Phase only

  • C-relay for model T operators 10A
CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

O02R2011

AirLift Chain WP 11" with Turnbuckle *** By Quote Only

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
LMHS2475WPADA

LiftMaster Horn / Strobe 12/24VDC White W/NO

ME123-BLK-U

Miller Edge Black Universal Outlet 2 -Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
TCG-2

LiftMaster Tri-Code Commercial Receiver ** DISCONTINUED

  • Two channel commercial receiver compatible with Linear Delta Multi-Code and Stanley radios.
  • Six 3' wired leads
Installation Manual
796

Fasteners Keps Nut 1/4-20 1000/Box

  • Lockwasher & nut combination
36190T.S

Genie Control Board 3-Terminal *** DISC..

  • Fits the Legacy overhead model and the PMX500 model and is compatible with:
  • 696CD/B
  • Genie PMX/B Model PMX500-IC/B
  • Model 496CD/B
  • GCG & GCG-L Series e.g. GCG350 GCG350L
  • PCG & PCG-L Series e.g. PCG400 PCG450L
    • .......more details
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
Instruction Manual
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor *** To Extent of Inventory

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

  • Steel construction
  • Plain finish
  • Cross Reference: W # 2523 for # 2376 balancer
OTBH-6532-AM05

Manaras Trolley Operator 1/2 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
    • .......more details
K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
K94-36992

LiftMaster Brake Cable Harness 1PH L5

  • Compatible with various LiftMaster® Logic 5.0 Commercial Gate Operators
1404-16FT-BLK-XL

Residential Side & Top PVC Weather-Strip with cap 16' Long - X-Wide Black

  • Extra Wide Profile 2-1/2" wide
  • Flexible co-extruded cap to hide screws
  • Dual Fin PVC that seals against the door
  • Material: Rigid PVC / Flexible PVC Co- Extruded
  • Colors: Black Brown Bronze Cream Sandstone White
  • Lengths: 7′ 8′ 9′ 10′ 12′ 16′ 18′
    • .......more details
PRO-HBH-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
K15-50B18QGX

Output Sprocket for SL595 and SL595UL

  • This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
3-5273

Serco Pusher Assembly AB1000

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

  • Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
  • The code sent by the remote changes at each activation removing any scanning and copying risk.
  • A special algorithm ensures a continuous synchronization between the receiver and transmitter
  • Includes AES128 encryption
  • Compatible with RADIUM AES128 receivers
  • Range up to 820 ft (250 m)
    • .......more details
1-1093

RW Track Bracket #333

  • 22 x 333
111-0362

RW Box Track #333 10ft

  • For doors up to 1000 lbs
  • 10 ga steel
7-6100

RW Hanger 160B2 Sold per Unit

  • Hanger used on #333 track
  • For door thichness: 2-1/4" to 3-1/2"
41A8910

LiftMaster Chain Idler Pulley

111-1899

RW End Blind/Cover 31 track Sold Individually

  • Covers the end of the track to help keep out dirt and debris
EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
OSH-6433-M-N1-RH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

  • 36 tooth sprocket