Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SF514U

Spring Fitting 5-1/4" Pair for 1" shaft

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.

201-300-411-00

Equinoxe Long Range Transmitter O/C/S for 16-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 16 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation - prior to 2016

Programming Instructions Instructions de programmation

201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation- prior to 2016

Programming Instructions Instructions de programmation

21-7460-1

LiftMaster Transformer 230/460V 3 PH

ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Built-in 26-bit Wiegand proximity tag
Eliminates need for separate proximity card or tags and transmitter
Supplied with quick-disconnect key ring
Same facility and ID codes for transmitter and proximity tag
Sold in lots of 10

.......more details

WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

Visor Style (comes with visor clip)
Green Indicator Light
Size: 2-1/4"" x 3-1/2"
Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
Same as models: 3910 02-3047-3BUH 297132

Programming Instructions

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

41ACOM12001

LiftMaster Capacitor 32UF 230V **DISCONTINUED

12-2125

LiftMaster Flanged Ball Bearing 1-1/4" Bore **to extent of inventory

Fits SW490GL swing gate

71-90TS

LiftMaster Timer Kit for TS Wiring

Field mod. kit

3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

For residential door with 2" track

WINDOW-21X13

Garaga Clear Thermo 21 x 13 White Frame 1-3/4" **** USE CODE G-21x13-134-W

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

20-8100M-DC

LiftMaster Electric Motor for VSL 1 HP 90 VDC 1 ph

Replacement electric motor for VSL gate op.

OTBH-6213-AE05

Manaras Trolley Operator 3/4 HP 240V 1Ph with Elect. Circuit Board Apt. Model

A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
30 cycles per hour 100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation manual Sell sheet

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** NLA

VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

Variable Frequency Drive modification for commercial operators
Whenever the primary power is 575V must add MX00164 panel

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
Winding cone color: White

PBTL3-BLACK

Replacement Button Only - N/O Open / Close Black

N/O switch and rubber cover for PBTL-3

K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
For All LiftMaster Trolley Operators except HCT and APT

12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

Fits model LJ / LJH

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

MEA2

Nice Key Unlock System for Older Metro Gate Op.

For underground gate operator
(1) MEA2 KEY UNLOCK SYSTEM (2) KEYS- METROPLEX & BIG METRO
Does not work on the newer systems. For newer Big Metro use BMA3 lever type release

KPX-100

EMX Access Control Keypad

Stainless steel face with metal backlit keys
Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
Dual relay outputs
Over 100 Million 4-8 digit codes
12-24V AC/DC operation
100 user codes on Relay 1; 10 users relay 2

.......more details

CB116A0250

Cable 1/16" 7x7 250' Galvanized

Galvanized cable 1/16" 7x7 250ft spool.

CB116A0500

Cable 1/16" 7x7 500' Galvanized

Galvanized cable 1/16" 7x7 500ft spool.

T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

Open/Close mini remote for 2 doors
Keychain and 12V battery included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P219-2K

Manual

SF375-DUPLEX

Spring Fitting 3-3/4" Stationary Side Only for Duplexing (Short Ear). *** Not Sold As A Pair

To make duplex assemblies you require one pair of SF600 (W & S) and only two SF375-DUPLEX stationary plugs only no need for P375 winding plugs

2B737

LiftMaster Output Board EL25

Output board for models EL25 and EL2000 (041B0737)

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

PRO-HBH-7521U-R

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation manual Manuel d'installation Loop placement guide Guide de positionnement des boucles

4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

XT2564-00-W

Xcluder Rodent Block 4" Black 75' Reel

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

Sold in cut-lengths per foot.
Dual fin

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

KH-3.5

Magnetic Key Hole 3-1/2" Tall

Decorative key hole only
Black flexible magnetic material with deep embossed design

15-50B24QGH

Sprocket 24 Teeth 1-1/4" Bore 1/4" Keyway

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

28020010-500

Cable Stainless 5/32" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
Allows for removal of a single PIN while maintaining full access for other users
Zinc-alloy metal front cover for tough environments

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure Compatibility chart

CSL24UL

LiftMaster New 24VDC Commercial High Traffic DC Slide Gate Operator

Battery Backup: 208 cycles or up to 24 days of standby power when the power is down
Security+2.0®: Access your property quickly with Security+2.0® Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used
MyQ®: Securely control and monitor your Gate Operator from anywhere and get activity notifications through the MyQ® app
Soft start / stop extends operator and hardware life in high-cycle and heavy-gate applications
Wireless dual-gate communication eliminates expensive conduit costs and unsightly driveway scars
Keyed manual disconnect when unlocked allows gate to be operated manually.

.......more details

Installation manual Manuel d'installation Sell sheet

4690-040

Plate Mount Isolator

Vibration and noise isolator
Failsafe design prevents the bolt from falling should the rubber break
Reduces noise transfer from opener to building
Universal design allows for easy installation
Accepts 3/8” bolt
300lb Max load

.......more details

Specifications

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

98875

Marantec Shark Tooth Position Reference Tab Chain Rail

For chain rails.
This part is installed inside rail on the actual chain.
This part works with the reference switch to determine the open & close limits of the garage door.
Reference switch part # 104083

TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

Priced per each

TAPS1458W

Stainless Hinge Screw 1/4" x 5/8" Self-Threader with Washer

Priced per each

PS324

Nice Battery Backup

Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)

ME123-M-BLK-END

Miller Edge Black End 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-BLK-U

Miller Edge Black Universal 4 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

LDM-1

Long Distance Module

Compatible with all door and gate operators that use 24V AC
20 mile range

39142R

Genie Aladdin Connect

Aladdin Connect™ controls and monitors your garage door opener with your smartphone
Compatible with smartphone iPad(R) & tablet devices
Easy installation & setup
Operates up to 3 doors with 1 system
Able to program timed closed functions
Wi-Fi communication Retro-fit capable Works with all brands

.......more details

Quick set-up guide Guide d'installation rapide

26CW94325-CUT

Truck Door Bottom Panel with Seal (15" x Cut-To-Size Painted White for Whiting Dryfreight

These panels are cut to customer's specifications
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes only with bottom retainer and seal (installed)

.......more details

JRGX114

Chain Hoist Jack Shaft JRG V2 1-1/4" Shaft Torque Force (126690)

Jack Shaft Mounting plastic guide 4.5:1 reduction
Gear drive
Fits 3-3/8" minimum offset
Includes: 26' of galvanized hand chain - doors higher than 15' require additional hand chain
1 chain keeper
2 shaft collars

.......more details

Sell sheet

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

Sell Sheet

CHI-SPECIAL

C.H.I. Special Order Door

Special order as per customer's requirements

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

374UT

LiftMaster Universal 2-btn Mini Transmitter

Dual frequency universal transmitter
Will activate 2 different types of openers (1 on each button)
Compatible with major brands except Marantec & Hormann
This mini remote is NOT compatible with DIP switch remotes or receivers

Programming instructions Sell sheet

19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

For 3/4 & 1 HP trolley operators

19-5118

LiftMaster Trolley Roller Chain Pack #41 for 18ft Door

For 3/4 & 1 HP trolley operators

DL-4000-8

Dock Leveler Retainer Galv. Steel Weldable 8' Long

Weldable to sides of dock leveler
Use with 4007 aluminum retainer & light brush (not included).
Vinyl insert slides into this outer retainer.

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

Three button wall station Open/Close/Stop
NO contacts on the Open and Close buttons
NC contact on the Stop button
Stainless steel surface plate
Flush mount

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

Q248

LiftMaster Gear Reducer 40:1 HCT Post 2/99 (K32-50251)

Same as K32-50251

MHS5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

1224-2-WHITE

Elton Commercial Window for Flush Doors 2" thick 1224 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

20109

Doorlec Hoist Spring EHJ

50180

Doorlec Brake Assembly 120V

41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

Kit contains: Straight arm Curved arm and hardware bag

20-1050B-2RLP

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

Replacement motor for APT
Also known as 20-1050B-2RL 20-1050B-2R K20-1050B2R
For L3 and L4

.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

SPRING027

Manaras Spring for Floor Level Disconnect Lever

spring for DISCONNECT001

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

.306-.250-DUPLX

Duplex Assembly .306 x 6" x 39" and .250 x 3-3/4" x 39" with Cones Right Hand

Assembled by manufacturer

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC

ZT37028235

Firestar Shutter 540 Galv with Lock & Key

BRAKEPART016

Manaras Brake Pad Assembly MLT MLJ MLH

Includes: 1 x BUSHING026 1 X CLUTCHPLATE008 1 X PLATE041

MU22-2WIRE-E-B

Miller Edge MU22 2-Wire End Black - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

7019195

FAAC 400 Screw Long Carte

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

#48 x 47 pitch with master link

19-5112-NP

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

PHOTO-062

Manaras Monitored Photoelectric Cells N1 Thru-Beam 20' Range ** NLA use PHOTO-070

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 20 ft

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

OSH-6533-ECB-LH

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation manual Sell sheet

K74-33015

LiftMaster Electrical Box Replacement Kit L3 **to extent of inventory

For models T GT and GH L3

K72-34818

LiftMaster Limit Shaft Kit SL575/585

Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.

BRACKET003

Manaras Disconnect Lever Bracket MJ

CABLE008

Manaras Disconnect Cable 25 ft

Cable 3/32"

OSH-6113-CONT-L

Manaras Opera-SH 3/4HP 120V 1Ph with Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

37030A

Genie Motor Assembly DC

Works with Genie ReliaG 800 2022 2024 and 2042
Replacement powerhead motor assembly

MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty