Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

SPR41B14A410B32

Sprocket 41B14-410A32 x 3/4 K0 0S w/Ollite Bushing

OSH-6114-CONT-R

Manaras Opera-SH 1HP 120V 1Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
OVERLOAD002

Manaras Telemecanique Overload 3-ph 1.2 - 1.8A

  • Telemecanique # LR2K0307
26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

  • Retainer extrusion is constructed of high quality aluminum.
  • Panel mounted retainer
  • Cross Reference: T #69790 500000
EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
  • .......more details
26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
CAPXLTK

LiftMaster Trim Kit and Back Kit

  • Trim ring and back box for CAPXL.
  • Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
  • Dimensions: Outer Trim – 23.75” x 19.375”
PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
7001-16-W/B

Commercial Side & Top Weather-Strip 16' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
28-02114

Truck Door 2" Vertical Track and Right Angle Assembly 120" Roadside (LH) for Whiting Roll-Up doors

  • SPECS: Length: 120" Fits door sizes: 101" - 114" high
  • Assembly includes: Right angle mounting track Vertical track and Torsion bracket
  • Cross Reference: W #2275-2
  • Galvanized steel 14 gauge construction
  • Tongue and groove for proper alignment at joints
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

C715477300K-1.25

Governor 1.25" Bore 1/4" KW

1634-112-W

Elton Commercial Window for Flush Doors 1-1/2" thick 16x34 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 35-1/8" x 17-1/8"
  • Cut-out size: 33-7/8" x 15-7/8"
  • Vision area: 31-3/4" x 13-11/16"
  • Different glass options and frame colours are available upon request
  • .......more details
SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

2100-0054-UPS

Linear Bolt #41 Chain Tension

  • Used on various Linear Gate operators
TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

24040

Doorlec Roller Chain #40 Sold per Ft

2376.206.35.940

Whiting Torsion assembly .206 wire size 35" spring length 94" shaft

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
  • .......more details
2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 343" Long
  • For Roadside order part # 2806.177.340
LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • .......more details
15-41B18LGH

Sprocket 41B18T 1" Bore

  • Also known as: 155016 41B18
  • 18 Tooth Sprocket #41 Chain (41B18)
  • Includes 2 Set Screws
41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
SUPPORT008

Manaras Board Support 1" ** Special Order Only

10TD900HH1

BEA 1-Button Transmitter 900 MHz

  • Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
  • It also provides better penetration of obstacles.
  • Operating temperature: -10 to 55C
  • IP65
028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
E/1929/234

Automatic Systems Rod Lever Assembly (BL229)

  • Used on the BL229 gate op.
E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

  • Used on the BL229 gate op.
MC271-2W-RH-GRAY

Miller Edge MC271 2-Wire Non-Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
  • .......more details
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
CP-SP-ARM-REL

Lynx Barlock Spring

7176.218*325.910

Whiting Heavy Duty Torsion Assembly .218 x 32.5" shaft 91"

TS-1-168-GALV-KEY

Tube Shaft 1" x 168 (14'.0) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

07-8005

LiftMaster Crank Link Barrier Gate

  • Also known as: K07-8005 G078005
  • For use with various LiftMaster® Barrier Gate Operators
K94-37848-2

LiftMaster Electric Motor 1.5HP

  • Replacement motor for SL595151U •1.5HP 1PH 120/208-240VAC
BMA3

NICE Release with Lever for Newer Big Metro Ops

9004-200FT-WHITE

Commercial Side & Top PVC Weather-Strip Reverse Angle Clip On 200' Spool - White

  • Side and Top Rigid PVC Reverse Angle
  • Reverse Angle Clip-On Vinyl
  • Side Use – Clips onto Steel Jamb
  • Also for Residential Use
  • Material: Rigid PVC / Flexible PVC
  • Box QTY: 200′ per Spool
  • .......more details
GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
ETBH-311-3/4HP

Doorlec 3/4 HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
H11G09-SS

Hinge #9 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G07-SS

Hinge #7 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H11G03-SS

Hinge #3 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
RB-TX10C

Miller Edge RBand Monitored Wireless Edge Transmitter

  • RBand transmitter only
  • On board diagnostics allows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
  • Nema 4
  • .......more details
K41-0256-000

LiftMaster Interlock Harness IHSL24UL

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

  • Sold per plug
GALV-306-6-144-L

Torsion Spring .306 x 6" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

  • Sold individually
HARNESS116

Manaras Opera ECB070 and Drive

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

  • Keychain style remote
  • Black
  • Not compatible with HomeLink
  • Dimensions: 2.5 x 1.5 x .5 inches
BCSI-PM19

Pivin Drapeau Keyway 1/4 x 1" *** Price by Quote Only

BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

2300-697

Linear Idler Wheel UHMW

GALV-375-334-R

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-331-258-R

Cut-to-Length Torsion Spring .331 x 2-5/8" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
GALV-243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-334-INSTALLED
2806.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 29" Long
  • Roadside
  • For Curbside order part # 2807.177*290
CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Minimum Length: 3ft
  • .......more details
10FALCON-EXW100

BEA Falcon Wide Explosion Proof HSG 100ft Cable

  • FALCON EX combines a microwave activation sensor with an explosion-proof / flame-proof housing
  • Ideal for use in unique environments such as chemical manufacturing petroleum refining and agriculture.
  • FALCON EX Wide can be mounted from 11 ½ – 21’ to fit any industrial application.
  • Nema4/IP66
  • Detection Zone: Falcon EX W: 30’ × 11’ @ 21’
  • Operating termperature: -22-140F
  • .......more details
DOCK-SEAL-R100

Dock Seal R-100 Fixed Header Seal Price by Quote Only

  • Made to order - Price varies according to specifics
  • This model is ideal for door openings of 8′ wide x 8′ high
  • Standard Seals include two side pads with a fixed head pad and option for an adjustable head curtain.
  • 40 Oz Vinyl
  • Comes with full height yellow guide strips and option for wear flaps
  • Black Blue and Green are stock colors for other colors there will be a surcharge as well as longer production time
  • .......more details
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-283-2-R

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

  • 10ft length
19-40ML-SS

Master Link #40 Stainless Steel

  • For #40 chain
8086.207.320

Whiting .207 x 2-5/8 IN x 32" Roadside with Cones

  • An original Whiting assembly
8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

  • An original Whiting assembly
K41-0253-000

LiftMaster Electric Motor INSL24UL

  • Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators
2807.206.380

Whiting .206 x 2-3/16 x 38" Curbside with Cones

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

  • Heavy duty industrial type control station open close stop 24V. control circuit
  • Universal mounting right or left
  • Floor level disconnect device electrical and mechanical
  • Emergency chain hoist operation on LJH model only
  • Colour code wiring diagrams
  • Rotary type limit switches readily adjustable in both directions
  • .......more details
GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

  • OPEN-CLOSE-STOP Push Button
  • Stainless Steel Enclosure
  • Buttons aligned vertically
  • Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”
GALV-393-6-144-R

Torsion Spring .393 x 6" x 12ft RH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

  • Installed directly on the output shaft of the operator.
  • Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
  • Includes sprocket for #50 chain
  • Operator mounting side must be specified
  • A spreader bar cannot be used in conjunction with this modification
  • This modification applies to RGH ops
  • .......more details
5-30-4

3" Vertical Track 12-GA 9'-3" (10' door) Sold per Pair

  • Punched track .102 x 112"
K72-12532

LiftMaster Output Shaft Kit J

  • Also known as: 308116010J 310-116010J 308116010JK 310116010J
  • Compatible with LiftMaster® Model J Commercial Door Operators
K80-5001

LiftMaster Keyway 3/16 x 3/16 x 1-3/4"

  • For use with various LiftMaster® Gate Operators and Perimeter Access Solutions
E/BLOP/118

Automatic Systems Option Double Limit Switch

GHW-383-1HP-RH

Doorlec Industrial Gear Head Door Operator 1 HP 208V 3P with ECB and Nema4 modification

  • Extra heavy-duty industrial-type electric door operator for damp environments.
  • Worm gear reducer 40:1 ratio
  • #50 roller chain and sprockets from operator shaft to door shaft. (#60 chain optional)
  • Door speed: 7 inches per second (approx.)
  • Adjustable torque limiter (also called friction clutch)
  • Rotary type limit switches
  • .......more details
GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

K77-38121

LiftMaster Wiring Harness SL585U SL595U

  • Compatible with LiftMaster® Models SL585U and SL595U Slide Gate Operators
31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

K79-13493B-500

LiftMaster Logic Control Board Assembly (FDO FCC LMPLC 500V CHIP)

  • For use with various LiftMaster® Commercial Door Operator Models
K005-KEY

Replacement Key for 3BXLT Key #5

  • Replacement key only for key #K005
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.
5-38-11

2" Horizontal Track Set 9'6" (8ft Door) 10" Radius 16ga 2-pcs

  • Left/Right hand horizontal track set 10" radius
  • Garage Door Residential usage