Devanco Canada - Get The Right Garage Door Opener‎ and Parts

050DCDDOWF

LiftMaster Receiver Logic Board WiFi Dock Door Jackshaft

050DCDDOWF is a Receiver Logic Board Replacement Kit.
Compatible with LiftMaster® Model DDO8900W DC Light-Duty Commercial Jackshaft Operators; featuring WiFi®

GH4416-09-R

Green Hinge #9 12-ga Right Hand *** No longer available

A unique spring-loaded hinge that allows automatic adjustment of the door.
Provides a close tight seal of the door to the building
Green powder coat finish
For doors up to 20ft

MK-00704

Micanan Harness 1-Phase Contactor Board

MA034RDOT

LiftMaster Articulating Square PVC Arm Kit Red/White with Retro-Reflective DOT Tape 9 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe
9 ft. x 2.5 in. square includes hardware kit (MA033)

Additional arm accessories

MK-00006

Micanan BX Conduit 1/2" ID x 5/8" OD Sold by the Foot

MQ00012

Micanan Adjustable Cable Stopper Gold C/W Set Screw Sold per piece

Used on all Micanan waterproof and corrosion proof units that have brakes as well as all explosion proof units.
Comes with set screw 3/16” x ¼”

TH827-24V

Erone 7-Day Timer 24V

24V AC/DC input voltage with battery back-up
One "NO" contact and one "NC" Contact
Up to 8 ON and OFF switches a day (56 per week)
Easy to read LCD Display
Manual override button
Ideal to keep a gate open during the day

.......more details

Programming Instructions Instructions de programmation

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 525
Reverse side is #431 Bright White

Colour chart

71-17148

LiftMaster Fuse Link Kit FDC

Fuse Link Replacement Kit for use with various LiftMaster® Fire Door Commercial Door Operators and Commercial Access Solutions

SPR41B44-1

Sprocket 41B44-1" shaft

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC) for Maxum Operators

For Maxum op

71AB120

LiftMaster Solenoid Brake Assembly for APT Logic 4

omplete disk brake assemble including 2-wire solenoid

Installation Manual

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

FORK001-RH

Manaras Disconnect Fork Right hand

K41-0354-000

LiftMaster Replacement Door for IHSL and INSL

Compatible with the IHSL and INSL

BRACKET204

Manaras OSHW Fork Pivot Bracket

PDC-300-075-1-50/63-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 50:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

041A4202-6B

LiftMaster WALL CONTROL PANEL

Wall Control Panel Replacement Kit. For use with various LiftMaster® Security+® Garage Door Openers. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
Also known as: 41A4202-4 41A4202-6B

PDC-300-075-1-50/63-20

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 50:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

15-50B60LGH

Sprocket 60 Teeth 1" Bore 1/4" Keyway w/SS

60 Tooth Sprocket Kit 1" Bore x 1/4" Keyway (50B60). For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators. Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

IBGARM18

LiftMaster TECHNA Industrial Barrier Gate Arm 18 ft without LED

3” Aluminum arm designed exclusively for TECHNA industrial barrier gate operators
18’ Functional length arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating temperature: -25°C to 60°C
Requires TECHNA INDUSTRIAL operator

.......more details

111439.0001S

Genie/Overhead Door Wire Harness Radio Pigtail

Fit various Genie/Overhead Door commercial operators

EHJX-353-3/4

Doorlec Industrial Jackshaft Op. Explosion Proof 3/4 HP 575V-3Ph ** Price on Request

Explosion proof NEMA 7/9 Heavy-Duty Industrial Operator
DC-2000 logic with adjustable Timer To Close Delay On Reverse.
Solenoid Brake prevents coasting and secures the door when closed
Explosion-proof (sealed) continuous-duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

PDC300-34-1-40-20-CH

Pulse300 Direct Drive Opener 3/4 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC300-12-1-40-20-CH

Pulse300 Direct Drive Opener 1/2 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-100-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-100-1-40/63-20-CH

Pulse 300 Direct Drive Opener 1 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1-40/63-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 1/2 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PRO-TBW-7511-U

Micanan 3/4HP 120V 1P Trolley Operator with Brake and Carwash Mod N4 Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

28001

Doorlec Flange Bearing F-360-13 3/8" (.94cm) Hole

Fits model LJHW

PDC-300-100-1.25-40/75-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1.25-40/75-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-050-1-40/50-20

Pulse 300 Direct Drive Opener1/2 HP 1" Shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

7-6119

RW Hanger 333 Truck & Pendant Sold Individually

For use on 333 square track

K77-36539

LiftMaster Output Shaft and Sprocket Kit

Compatiable with various LiftMaster® Commercial Swing Gate Operators
Kit includes smooth-barrel cylinder shaft + sprocket #35 limit chain APS sprocket roll pin
Compatible with LiftMaster gate operator models RSW12UL CSW24U

2200-938

Linear VBelt 28 4L Cogged

CGH155L5-LH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

41A6102-NOBOX

LiftMaster Power Door Lock Connector with 2 pins No Box

For Jackshaft models

K76-34997

LiftMaster RPM Sensor Kit for L2 L3 L4 L5

For use with various LiftMaster® Commercial Door Operators

620-100991

Linear Heater Kit Assembly 460V Cage Style

Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)

2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

FLO2

NICE 2-btn Dip Switch Remote 433.92 MHz

Nice 2 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

BGARM12ART84

LiftMaster TECHNA Barrier Gate Arm 12 ft w/84" Clearance without LED

12’ Functional length arm with an 84” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator.

BGARM10ART84

LiftMaster TECHNA Barrier Gate Arm 10 ft w/84" Clearance without LED

10’ Functional length arm with an 84” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator.

BGARM12ART98

LiftMaster TECHNA Barrier Gate Arm 12 ft w/98" Clearance without LED

12’ Functional length arm with an 98” articulated clearance height from the base of the arm
All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
Operating Temperature: -13°F (-25°C) to 140°F (60°C)
Requires TECHNA PARKING operator

K26-438

LiftMaster Artisan Timer

For use with various LiftMaster® Speed Jack Commercial Door Operators
Also known as: 26-438 AB117-00121 G26438 438USA
The DIP switches are used to set the time delay period between 1 and 1024 seconds.
The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.

.......more details

K94-36891

LiftMaster Battery Wiring Harness 7AH

For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators

KEYSWITCH039

Replacement key cylinder with two keys for station079

26-945215

Truck Door Intermediate Panel (11.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

K20-3075C-4T

LiftMaster Electric Motor 3/4 HP 230/460V 3P CF TEFC

Also known as: 20-3075C4T 20-3075-T 20-3075C-4T K20-3075C4T G203075T 203075T
For use with various LiftMaster® Commercial Door Operators

MK00810

NICE Replacement PLC Board for PRO-FDG

OPH-6532-0M00

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

4" deep (projection) x 20" tall x 12" wide

OSHW-6533-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Left Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

OSHW-6113-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
This end cap will also work on the CPT223 extrusion

111859.0001.S

Genie / OHD Shaft Assembly HXH/RHX-Hoist *** Price by Quote

112498.0001.S

Genie Release Kit Expf *** Price by Quote

112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
Works with TDC12 & TDC22 Maxum operators

22DUALTROLLEY16

LiftMaster Dual Trolley Mod for TDC12 TDC22 to 16ft high **includes (TDC41-16) CHAIN PACK (10-5816) 16 FT RAILS x (11-52102) 1" Solid Shaft 12ft (DualAuxTrolley41) Hardware kit

Includes: TDC48-20 CHAIN PACK #41 16 FT RAILS x 1 11-5220 CRSBARROUND1" X 12' x 1 10-5820-P TRACKTROLLEYFOR 16FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD41 MOD-KITDUAL TROLLEY41 CHN x 1

LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles

TDC1222-20

Liftmaster Comm. 20FT Trolley Angle set (10-5820-P x 2) and #41 chain pack (TDC41-20) and spacer pad (71-10324***Actual length 275"***

Double Angle Rails for doors up to 20'6" high
Includes #41 chain pack and Spacer pad part # 71-10324

MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

1-1785BL

RW Spring Bolt 514 x 2 Black

Housing: Cast iron 5-1/2" H x 2-7/8" W
Bolt: Cast iron bevelled
Keeper: Surface mount
Chain: Black 36" long with ring Finish: Black

26004A.S

Genie Bolt Retainer

The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support

510.5423.00

Whiting Side Seal Upgrade for DF Door OLD 5423

Upgrade when purchased with a complete door

LMEOLRES-10

LiftMaster End of Line Resistor 10K

For use with various LiftMaster® Commercial Fire Door Operators Gate Operators and Extended High Performance Release Devices

PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

MKTG-1031-1

EMX Pastic Screw for IRB-4X2

Replacement screw only

41D0236

LiftMaster keypad replacement kit for EL25 and EL2000

This replacement keypad features a 16 button face with weather protection gasket
fits Elite series EL2000 and EL25 access control systems
Also known as: 041D236 180D0236 00000000000180D236 180D236

MYQ-D49TCXB

LiftMaster MYQ Video Doorbell

Best-in-class Visibility: See every detail with 2K video and a 150° lens.
Color night vision keeps your view sharp around the clock.
Motion Detection: Get real-time alerts when motion is detected.
Easy Setup and Recharge: Install as a battery or wired solution. To recharge remove and plug in unit.
Stay Connected to Your Front Door: Get alerts when a person is detected.* *Available with a Video Monitoring Plan (sold separately).
Extreme Weather Compatibility: Built to perform in extreme weather from -4°F to 122°F.

.......more details

7DUALTROLLEY20

LiftMaster Dual Trolley Mod TDC 7 to 20ft **TDC48-20 CHAIN PACK #48 20 FT RAILS x 111-5220 CRSBARROUND1" X 20' x 110-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

Includes: TDC48-20 CHAIN PACK #48 20 FT RAILS x 1 11-5220 CRSBARROUND1" X 20' x 1 10-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

RGHW-6214-MON-R

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Right Hand

Rapido version of model OGHW
Includes Monitored Waterproof photocells

ME120-Y-2WIRE-R

Miller Edge Yellow 2-Wire NM Right Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

041-0186-000

LiftMaster LED Light Pod Kit for 87504-267 model

Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.

TDC48-14

LiftMaster Trolley Chain Pack #48 700LBS 14ft Door

Chain pack only
TDC48-14 is a #48 Chain Pack Kit for 14 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 14' commercial doors.

TDC48-10

LiftMaster Trolley Chain Pack #48 700LBS 10ft Door

Chain pack only
TDC48-10 is a #48 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 10' commercial doors.

MYQ-C23ACXW

LiftMaster MYQ Garage Camera Magnetic Mount Motion detection & 2-way talk

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

MYQ-C13ACXW

LiftMaster MYQ Indoor Camera Motion detection Night vision & 2-way talk

The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
Video camera begins recording when motion is detected.
Easy setup with Bluetooth and magnetic mounting base.
Enables secure in-garage delivery for Amazon Prime packages

.......more details

Z9962

L5 Operator Mounting Bracket

Compatible with L5 Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

15-48B18LGE

LiftMaster Sprocket 48B18 1"x 1/4"

Also known as: 15-9004 1548B18LGE 159004

Z9961

Maxum Operator Mounting Bracket

Compatible with MAXUM® Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

Installation Manual

86-925

Gel Connectors Red 19-26 AWG 100/Pkg

Internal moisture-resistant sealant protects wires from corrosion (indoor/outdoor use)
Quick one-step splicing – insert unstripped conductors and crimp
Use with solid copper single-conductor wire 19-26 AWG
Maximum insulated O.D. of .066 in. (1.68 mm)
Permanent connection- once crimped they cannot be reused
Use 12 or 3 ports as needed

.......more details

35.0245

BEA LZR-WIDESCAN Replacement Cover Only Black

Replacement cover for the LZR-WIDESCAN sensor

CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

For MGH 2/3/5HP

37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells (MUST incl. resistor)

Works in all Doorlec model openers except R-99
Input power to board is 120V
24V DC available on terminals 9 & 11
Accessory power on terminals 1 & 11
1 = Stop. 2 = Com. 3 = Open 4 = Close
Can be adjusted for constant pressure

.......more details

27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

PRO-HBH10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details