Devanco Canada - Get The Right Garage Door Opener‎ and Parts

6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
Microprocessor based / controlled clock for accuracy of 2%
Operates on a power supply of 12vdc or 24vdc
SPDT relay output : 5 amp 24vdc contacts

GALV-343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

An original Garex window
Fits 1-3/4" thick door R16

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

RBand is a monitored sensing edge transmitter/receiver system.
The receiver can be paired with up to three transmitters.
On board diagnosticsallows for easy set up and troubleshooting.
Offers pulsed and normally open outputs.
Ideal for commercial door operators manufactured after 2010.
Bi-directional link improves immunity to RF interference.

.......more details

GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

P-50H

End Plug for 1/2" ID Rubber Air Hose w/ Center Hole Qty 1

Sold per plug

HAWK2

EMX Microwave Motion Sensor Wide Coverage 5410-2 *** DISC

Advanced K-band planar microwave technology
Easy installation and adjustment
Wall or ceiling installation
Directional sensitivity: toward away or both
High coverage area resolution
Installation height up to 20 feet (6 meters)

.......more details

IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Also available in white: IP-MON
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

MD00027

Micanan Disconnect Coupling 3/4" ID PRO-J/LJ

Sold individually

OPJ-6433-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake

.......more details

BCSI-PM20

Pivin Drapeau Sprocket 50B12 *** Price by Quote Only

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

41A3589-2

LiftMaster 10ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 10 foot high garage doors
T rail assemblies ONLY.

LEDSTRIP004

LED Light Strip (1 Unit) Red/Green/Blue 96" 24VDC

An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option

Installation Manual

K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC

29201

Doorlec Transformer 460V pr 120V sec 35VA

460V prImary 120V secondary 35VA

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-331-258-L

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Galvanized Blue/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED
Galvanized

GALV-250-334-L

Cut-to-Length Torsion Spring .250 x 3-3/4" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

GALV-243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-334-INSTALLED

2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

Replacement torsion spring with cones
Specs: .177 x 2-3/16" x 29" Long
For Roadside order part # 2806.177.290

CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black extrusion flexible PVC conductive polymer Ends: Molded polymer
End plugs and mounting channel sold separately.
Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
When combined with the ME123 mounting channel ideal for 2" thick surfaces
Lead Wire 12 in. 22 gauge SJTO

.......more details

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: 70 milliseconds

.......more details

Installation Instructions MWT12B Spec Sheet MWT12B FAQ MWT12B

210339

Skylink Belt Gear with Holder LQ-803

LZR-MICROSCAN1T

BEA LZR Microscan Kit 1 Door with 2 Microscans Hub & Cables

Laser-based sensor system for automatic swing doors.
Time-of-flight technology used to eliminate the limitations of infrared-based devices.
Background independence eliminates nuisance detections caused by changing conditions while gyroscopes sense the movement of the door for accurate positioning.
Provides asjustable pattern depth.
Min/max door width: 20"-48" from leading edge of sensor LED
Mounting height: 75"-98" from finished floor to sensor LED

.......more details

10SSTI

BEA Active Infrared Presence Sensor

Active infrared sensor for industrial environments.
Applications: automatic industrial doors gates and automation.
Uses triangulation to detect presence of an object eliminating false detections caused by varying ground conditions.
Can be mounted on stationary or moving objects.
Can be used individually or daisy-chained with up to 8 other modules.
Can be used on narrow and wide doors.

.......more details

GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

K41-0383-000

LiftMaster Toroidal Transformer 1200lb / 120VAC-240VAC

For Maxum ops

K41-0375-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 1200)

Maxum J-1200

R2T

Erone Radium Mini 2-Button Transmitter 433MHz

The RADIUM remotes are compatible with all standard 433 MHz RADIUM wireless receivers.
They have been designed with a high security coding system (KeeLoq® Hopping code).
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Range up to 820 ft (250 m)
Two CR2016 batteries included

Wireless System Chart

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

5-30-4

3" Vertical Track 12-GA 9'-3" (10' door) Sold per Pair

Punched track .102 x 112"

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

E/BLOP/118

Automatic Systems Option Double Limit Switch

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

.......more details

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

2200-983-UPS

Linear Brake and Puck Assembly UPS HSLG

GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

9' Square Arm
PVC
Red & White Retro-Reflectorized DOT Tape
Hardware NOT included

XF600VAC7

LiftMaster 600V Transformer Kit 700

For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators

OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #41 chain pack

TDC1222-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #41 chain pack (TDC41-14) ***Actual length 203"***

Double Angle Rails for doors up to 14'6" high
Includes #41 chain pack

TDC7-8

Liftmaster Comm. 8FT Trolley Angle set (10-5808-P x 2) and #48 chain pack (TDC48-08) ***Actual length 131*

Double Angle Rails for doors up to 8'6" high
Includes #48 chain pack

S50E

LiftMaster Small Profile Ends Kit 10 Sets of 2

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (10) sets of 2

SHAFT028

Manaras FDGHE Cam Shaft 5/8"-18

OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Comes with carwash modification and tracks/chain for doors up to 12ft

.......more details

GALV-295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

JDC7S1BMC

LiftMaster MAXUM Jackshaft DC Commercial Op. w/BBU 700LB

Max door height: 40 ft. Max. Sectional doors up to 700 lbs. Rolling steel or insulated doors up to 450 lbs.
myQ Compatibility: Setup available for either myQ or myQ Facility
Operating Temperature: Without Heater: -4°F (-20°C) – 140°F (60°C). With Heater: -40°F (-40°C) – 140°F (60°C)
Heater sold seperately
Voltage: 120V/240V (1PH/3PH); 480V (3PH); 208V & 600V (3PH) available with transformer accessory
Motor Power: 24VDC

.......more details

JDC7S1BMC_Installation-manual JDC7S1BMC_Manuel-installation Data sheet Fiche Technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-331-334-144-L

Torsion Spring .331 x 3-3/4" x 12ft LH Galvanized Red/White

Wire size: .331
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-319-334-144-R

Torsion Spring .319 x 3-3/4" x 12ft RH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-306-334-144-R

Torsion Spring .306 x 3-3/4" x 12ft RH Galvanized Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-250-334-144-R

Torsion Spring .250 x 3-3/4" x 12ft RH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-R

Torsion Spring .243 x 3-3/4" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

PUSH180

Manaras Contact Block NO XB4/XB5

MOTOR069

Manaras Electric Motor 1HP 575V 3PH 60hz TEFCXP 56C CFACE Only No Base

MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

XF208VAC12

LiftMaster 208V Transformer Kit 1200

VTS3-PER-FOOT

Top Seal vinyl only Black Price per Foot

Q123

LiftMaster Electric Motor 12VDC K20-9012B-1

For use with various LiftMaster® Slide and Swing Gate Commercial Door Operators

INFLAT-DOCK-SHLTR

Inflatable Dock Shelter *** Made to Order Sold by Quote Only

Custom order item. Sold by quote only

CAMPLATE019

Manaras Cam Plate Opera C-Box

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

41151R

Genie Light Kit Wall Mount

Bluetooth Light Assembly for the Genie #6070 & 6170 Wall Mount garage door opener.
Replacement light kit for 39945R

DS75-INSULATED

Light Commercial Insulated Rollup Door with Exterior Curtain Lock ** Price by Quote Only

Mini Storage door non insulated with exterior curtain lock
Custom ordered to exact size

WD-8300

Wayne Dalton Classic Steel Garage Door ** By Quote Only

Heavy-gauge steel and a thick layer of insulation provides a smooth dependable operation that excels in appearance and strength.
R-VALUE: 12.12 / 16.12
WD's best-insulated residential garage doors feature two layers of steel surrounding a thick layer of foamed-in-place polyurethane insulation.


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login