Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K1D8080-1CC

LiftMaster Expansion Board for LA500DC

K94-36411

LiftMaster Piezo Alarm

For LA400DC

K94-36408-1

LiftMaster Reset Switch LA500 with ID Resistor

For use with LiftMaster LA500 Series swing gate operators
Includes ID resistor kit
Includes LA500 product ID

42-8116-1

LiftMaster Terminal Block 16-Position

K20-1100C-2TLP

LiftMaster Electric Motor 1 HP 115/230V 1Ph TEFC Logic

EP2986

Exhaust Port 5" non latching long barrel

5" inside diameter 2" sleeve - non latching.
Includes fasteners & gaskets.
Polished aluminum finish.

1224-GLASS-ONLY

Elton Sealed Glass for frame 1224-1-3/4"

Thermal replacement glass only

15-3619

LiftMaster Sprocket 50B19T 1-1/4" x 1/4" 2-SS

ME120-PC

Miller Edge Rigid PVC Mounting Channel Sold per Foot

ME120-C

Miller Edge Aluminum Mounting Channel Sold per Foot

1-1/16" Wide 9/16" High

ME120-BLK-E-6FT

Miller Edge 2-Wire Black End Outlet 6 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MOTOR258-WIRED

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator is equipped with electronic circuit board or if it is hard-wired

17S

Rolling Steel 2" Flat Stamped Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

Installation Manual Sell Sheet

MP00019

Micanan Up-Charge Track and #410 (#48) chain for 20' h Door *Actual length 270"*

For 1/3 HP and 1/2 HP operators only

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

BRAKE013

Manaras Band Brake Assembly Kit OSH

Installation Manual

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

MOTOR255-WIRED

Manaras Electric Motor 3/4HP 120/240V 1PH Wired

Electric motor comes pre-wired for a brake
Must specify if operator has electronic circuit board or if it is hard-wired •This item is compatible with BRAKE011

MP00022

Micanan Up-Charge Track and #41 chain for 24' h Door *Actual length 318"*

For 3/4 HP and 1 HP operators only

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

For 1/3 HP and 1/2 HP operators only

MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

For 1/3 HP and 1/2 HP operators only

MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

For 3/4 HP and 1 HP operators only

MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

For 3/4 HP and 1 HP operators only

MP00014

Micanan Up-Charge Track and #41 chain for 14' h Door *Actual length 198"*

For 3/4 HP and 1 HP operators only

MP-00024

Micanan Auxiliary Chain Disconnect for Pro-T TB

Allows for operation of a door by an auxiliary chain hoist.
Hoist mechanism is coupled to front end of drawbar
MUST specify door width and position of hoist (left or right)

8030196

Marantec Belt Connector Kit

Works for all Marantec Belt Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

8030234

Marantec Chain Connector Kit

Works for all Marantec Chain Drive Openers
For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
Includes two connector pieces and four screws
Not for use on the heavy duty rails used by Q7900 & M4900e

9003-17FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 17' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

9003-13FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 13' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-15FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 15' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-9FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 9' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

9003-11FT-BLACK

Commercial Side & Top PVC Weather-Strip Reverse Angle Bolt On 11' Long - Black

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle bolt-on vinyl retainer.
Bolts onto reverse angle steel jamb.

Drawing

SL532-ZP-COPPER

Zinc Plated Copper Sleeve 5/32" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST532COP. Stops are not zinc plated

SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST316COP. Stops are not zinc plated

41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

Logic Control Board 315 MHz
Compatible with 3840 Screw Drive Purple Learn Button

SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

BY PASS Board for 1150051
Same as KSN1600341B

SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

Oval sleeves ONLY
Stops sold separately part # ST18COP. Stops are not zinc plated

29-98200

W-Style Universal Drop In Door 98" x 100"

Shipped with hardware loose on each side
98" W x 100" H
Made with 3/4" thick 7 ply exterior grade medium density plywood
Includes all hardware
Other sizes available

USVD-4X

EMX Ultra Sonic Vehicle Detector

The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle.
The USVD handles any drive thru operation such as fast food banking pharmacies car washes and parking garages.
The USVD is simply mounted on a post or order box and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.
Aux. relay settings for pulse on ENTRY EXIT or BOTH
Output delay option for 1 2 and 4 seconds
Operating range: 1ft. – 5ft.

.......more details

Installation Manual Sell Sheet

6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

6X18SC50

Devanco Loop 6' x 18' Saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
Requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

5X20SC50

Devanco Loop 5' x 20' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PD180CBT30MU

Carlo Gavazzi Photoelectric Through-Beam Emitter 30M

Emitter only. If receiver is required order PD180CBT30Q
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage emitter: 2 x 3.6VDC lithium batteries
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

PD180CBT30Q

Carlo Gavazzi Photoelectric Through-Beam Receiver 30M

Receiver only. If emitter is required order PD180CBT30MU
For Industrial doors and Gates
Range: 30M
Relay output
Supply voltage receiver: 12-24VAC/DC
Dimensions: 180m x 51 x 49m

.......more details

Installation Manual

17330

Doorlec DC-3100R 3-Channel O/C/S Receiver 301 MHz

Range of approx. 175ft (53.34m)
8 dip-switches for programming
24/120V selectable
Made from polycarbonate plastic for rugged and weatherproof use
Includes a built-in antenna to eliminate interference and provide continuous reception
A plug-in wiring harness is provided to facilitate interconnection between power supply of operator and receiver

.......more details

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

1224-1-3/4"-BLK

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 Black Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 25-1/8" x 13-1/8"
Cut-out size: 24-1/16" x 12"
Vision area: 21-11/16" x 9-5/8"
Different glass options and frame colours are available upon request

.......more details

2376.177_25.860

Whiting Torsion assembly .177 wire size 25" spring length 86" shaft

39-10167

LiftMaster Clutch Disc for MH

11-10987

LiftMaster Clutch Shaft for MH

K72-12493

LiftMaster Limit Switch Kit

Complete kit with limit nut retainer switch plates backup plate depress plate limit switches (3) standoffs screws and locknuts
For logic control MT BMT MJ MH MHS

23-10916

LiftMaster Interlock Switch SPDT

Interlock switch for LM commercial door openers with hoist disconnects
15A 125/250VAC

K72-12487

LiftMaster Limit Shaft Kit MT BMT MJ mechanical operators

For models MT BMT MJ mechanical operators
Includes limit shaft bearings limit nut sprocket. RPM sensor roll pin & e-ring

71-10345

LiftMaster RPM Sensor Board (MT only)

Z9998

Hand Chain 26' for Torque Force Chain Hoists SAE 1008 Zinc Plated

Works with all Torque Force Chain Hoists

41D7924-1

LiftMaster Extra Door Sensor for 821LM First Generation **to extent of inventory

Liftmaster Chamberlain 041D7924-1
Required to add a second garage door opener to your 821LM MyQ Garage.
Works on the Liftmaster 821LM and Chamberlain MYQ-G0201
Compatible with:
Green Learn Button (Billion Code 390MHZ)
Models: 1245 12551270 1280

.......more details

75-10359

LiftMaster Brake Pad

same as K75-10359
For MJ / HMJ and MT / BMT operators

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

K75-12492

LiftMaster Brake Kit 115V Units MH

PRO-LH-5021U-LH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (PRO LHE)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

PRO-LH-5021U-RH

Micanan 1/2HP 230V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (PRO LHE)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

PRO-LH-5011U-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
On board 372 MHz receiver with antenna
On-Board receiver holds up to 20 transmitters

.......more details

Installation manual Specification sheet

K-LA500

LiftMaster Primary Replacement Arm Service Kit for LA500 Original Arm ** DISCONTINUED

Replacement arm only - no stripes old style

PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

WKP5LM3

LiftMaster Wireless Keypad 5-Code ** Replaced by KPW5

Wireless access control keypad
Same features as WKP250LM3
5 code capacity - 4-digit codes
2-way design with confirmation beep
900MHz

Programming Instructions

MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

Length: 4 ft

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MSWIRE12GA6C

LiftMaster Dual Gate Connecting Kit 40 ft Wire **DISCONTINUED

H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

MBAT

LiftMaster Battery 7AH 12VDC

Single battery good for 40 cycles
Dual batteries recommended on gates over 16ft or 600 lbs.

706111011

Rolling Steel 800 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

M005

Rolling Steel Groove Mouth GM6789 Fire Door

616001404

Rolling Steel 900 Series Guide Channel Sold per Foot

Assemblies of strucural steel angles bolted to the wall supporting the entire weight of the door.

H031

Rolling Steel Slide Bolts and Holder Fire Door

271723

Rolling Steel Slide Bolts for Bottom Bar D679

B119

Rolling Steel Fire Door Bottom Bar Slotted Angles Sold per Foot

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

B014

Rolling Steel 2" Flat Bar 5/16" Sold per Foot

285547

Rolling Steel Aluminum Transition Piece Sold per Foot

B025

Rolling Steel Assembled Angles 2" x 2"x 3/16" Sold per Foot

Includes angles astragal and 1/2 slat

E076

Rolling Steel Aluminum Bottom Bar 679 Extrusion Sold per Foot

14FW

Rolling Steel 3" Filler Endlock for Continuous

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

14JW

Rolling Steel 3" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

14-J

Rolling Steel 3" Flat Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

4JW-RIGHT

Rolling Steel 3" Curved Cast Windlock 273004 RH

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

17K

Rolling Steel 2" Flat Continuous Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

17JW

Rolling Steel 2" Flat Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

17J

Rolling Steel 2" Flat Cast Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2KW

Rolling Steel 2" Curved Continuous Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

2JW-D064

Rolling Steel 2" Curved Cast Windlock

Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
A wind lock is a small metal device that is attached to each slat.
Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
With a windlock your door can operate efficiently despite wind load or pressure.
Windlocks are easy to add on to any existing rolling steel or shutter door

.......more details

AC9

Felco C9 Cable Cutter 1/4" Capacity

Tool length: 13"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 9mm / 0.35in

.......more details

Data sheet