Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

25-42-270

Extension Spring 7' Door - 270 lbs Orange ** check for availability

  • Double - Loop
  • 25" long 42" stretch 270 lb load
  • Sold individually
.331_2-5/8"-LH

Torsion Spring .331 x 2-5/8" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 2-5/8"
  • Length: 12 ft
CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
  • .......more details
CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
.262-258-R

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
KH-3.5

Magnetic Key Hole 3-1/2" Tall

  • Decorative key hole only
  • Black flexible magnetic material with deep embossed design
.295_3-3/4"-LH

Torsion Spring .295 x 3-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 3-3/4"
  • Length: 12 ft
MK00785-RATED

Explosion Proof Killark Labeled 3-Btn Pushbutton Control Station

  • CSA and UL labeled station
  • Three button O/C/S Nema-7/9
  • Surface mount
Q085

LiftMaster Dolly Cover HCT K09-50756

  • Same as K09-50756
34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

MO00002

Micanan Brake Compression Spring (5/16" ID) *** Replaced by MO00034

CB-1.097

Whiting Stainless Steel Cable 97" L with Plain Grommet 5/16" Eye

7001-18-WHITE

Commercial Side & Top Weather-Strip 18' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

  • Actual length is approx. 9'-1"
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
RADIO-37

Manaras MCR-32 Open/Stop/Close 24V receiver Nema 1 313 MHz ** To extent of Inventory

  • 3-Channel O/C/S receiver controls one operator with MCT series transmitters.
  • Steel Nema 1 enclosure.
  • 24 VAC input voltage.
  • 2 N/O and one N/C relay
  • Commercial antenna Included (Radio029).
  • Replaced by RADIO-RE900A
  • .......more details
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

DD-KIT

Linear Double Delta Radio Kit (2X DT & 1X DR)

  • Kit includes two DT remotes and one DR receiver
  • Same as: DNP00006
  • Operates on 24 VAC power
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
19-80HL-NP

Half (Offset) Link #80 Nickel Plated

  • For #80 chain
PRO-APT-7553-U

Micanan 3/4HP 575V 3P Apartment Trolley Operator N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
28-00190

Truck Door 1" Std Vert. Track and Angle Assbly Curbside (RH) 96.5" Todco Style

  • Fits Todco style doors
  • Galvanized steel 14-gauge construction
  • Includes J-style channel mounting angle with track and operator bracket
  • For door opening less than 90" high
  • Fits door sizes 72 - 90" high
  • Cross ref: T #49014-1 T #41034-1 & W #4046
  • .......more details
HINGE-811-PCG

Powdercoated Hinge #8 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #8 - 0.87 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
PDC-300-100-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
PDC-300-075-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
PDC-300-100-1-40/63-20

Pulse 300 Direct Drive Opener 1 HP 1" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • .......more details
41A6102-NOBOX

LiftMaster Power Door Lock Connector with 2 pins No Box

  • For Jackshaft models
MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
BGARM10ART84

LiftMaster TECHNA Barrier Gate Arm 10 ft w/84" Clearance without LED

  • 10’ Functional length arm with an 84” articulated clearance height from the base of the arm
  • All parts ship in a single carton box for convenient transport and storage ensuring easy on-site assembly. The arm is field-customizable for added flexibility.
  • Made from durable aluminum extrusion with secure fasteners for a reliable fit. Arm joint uses bolts nuts and washers for stability and are reinforced by a torsion bar for added strength.
  • Operating Temperature: -13°F (-25°C) to 140°F (60°C)
  • Requires TECHNA PARKING operator.
K20-3075C-4T

LiftMaster Electric Motor 3/4 HP 230/460V 3P CF TEFC

  • Also known as: 20-3075C4T 20-3075-T 20-3075C-4T K20-3075C4T G203075T 203075T
  • For use with various LiftMaster® Commercial Door Operators
OPH-6532-0M00

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details
MGH-6537-0M00

Manaras 3 HP 600V 3P Jackshaft monitored Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

  • The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
  • LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
  • With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
  • The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
  • Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
1-1785BL

RW Spring Bolt 514 x 2 Black

  • Housing: Cast iron 5-1/2" H x 2-7/8" W
  • Bolt: Cast iron bevelled
  • Keeper: Surface mount
  • Chain: Black 36" long with ring Finish: Black
610.5600

Whiting Panel Option for 5600 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
  • .......more details
MKTG-1031-1

EMX Pastic Screw for IRB-4X2

  • Replacement screw only
RGHW-6214-MON-L

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Left Hand

  • Rapido version of model OGHW
  • Includes Monitored Waterproof photocells
ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
TDC48-10

LiftMaster Trolley Chain Pack #48 700LBS 10ft Door

  • Chain pack only
  • TDC48-10 is a #48 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 10' commercial doors.
27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

PRO-HBH10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
MGH-6236-1M00

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OTBH-6532-AM05

Manaras Trolley Operator 1/2 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
  • Includes monitored N4X eyes (PHOTO 061)
  • .......more details
K07-8004

LiftMaster Upper Crank Link BG770/790 Barrier Gate

  • For use with BG770/790 barrier gate operator
K94-36992

LiftMaster Brake Cable Harness 1PH L5

  • Compatible with various LiftMaster® Logic 5.0 Commercial Gate Operators
CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

38252A.S

Genie Opto Wheel

  • The opt-wheel normally needs replaced if your garage door opener is short traveling in both directions (open and close) in the excess of 6 inches at a time then stopping.
  • Compatible with models: 1028 2028 1128 2128 1035 1055 2036 2035 2055 3035 3055 2033 3053 3155 7035 7055 7053 7135 7155
PRO-HBH-10083U-L

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
MX001777

HySecurity Limit Switch D2VW-5L3-1HS

  • Switch type: mechanical limit switch
  • Model: D2VW-5L3-1HS
  • Activates on contact to trigger gate control logic
  • Sealed housing for environmental resistance
MX000585-0

HySecurity Smart Touch Controller Board

  • Easy Installation Configuration
  • Warning Buzzer and Alarm System
  • Ethernet Connectivity via HyNet Gateway
  • Security Monitoring and Breach Reporting
  • Allows for the configuration of over 70 different settings for a reliable and highly customized gate operator
114-0328

RW Track Bracket #31

  • 18 x 31
41A8910

LiftMaster Chain Idler Pulley

F210B

NICE Adjustable Synchronised Photocells w/Blue BUS Technology Sold as a Pair

  • Pair of synchronised Photocells with built in transmitter for 8k2 resistive safety edges.
  • Transmitter is powered by one 3.6 V battery.
  • Receiver with BUS Connection.
  • 210 degrees horizontal adjustment and 30 degrees vertical.
  • F210B can only be connected to 'BlueBUS' networks
CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

  • Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
  • Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
  • Bearings: 2 hardened steel disc bearings
  • Finish: Complete hinge black enamel
  • Fasteners are not included
0824-2-WHITE

Elton Commercial Window 2" thick Door 0824 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 23 15/16" x 7 15/16"
  • Cut-out size: 23-1/8" x 7-1/8""
  • Vision area: 21-9/16" x 5-1/5"
  • Different glass options and frame colours are available upon request
  • .......more details
BGARM12

LiftMaster TECHNA Barrier Gate Arm 12 ft without LED

  • 3” Aluminum arm with integrated LED lights channel designed exclusively TECHNA barrier gate operators
  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle. Additionally it is compatible with the S50L a wireless edge safety device.
  • (Optional) LEDs are easily installed by sliding them into the arm's center channel and securing them with the included press-in clip
  • IP68 rated waterproof LED lights
  • .......more details
1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

  • For door thickness 3"
.171-2-3/16-72-LH

Spring Wire .171 x 2-3/16 x 72" LHW Galvanized

.192-2-3/16-72-RH

Spring Wire .192 x 2-3/16" x 72" RHW Galvanized

  • .192 x 2.188" x 6'
AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 343" Long
  • For Roadside order part # 2806.177.340
5001-16-CREAM

Residential Side & Top Weather-Strip 16' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
5001-7-CREAM

Residential Side & Top Weather-Strip 7' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-7-SANDSTONE

Residential Side & Top Weather-Strip 7' Long - Sandstone

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
BEA-10LIGHT-A

BEA Modular LED Signal Light Audible Segment

  • Audible Alarm 2.6 KHz ±250 Hz oscillation frequency; maximum intensity 92 dB @ 39.6 in
MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

  • Continuous duty C-flange TEFC 60Hz
112357.0002

Overhead Logic Board for RSX 1/2HP 1PH

  • Fits OPRSXH75015BR
7131

Whiting Brush Side Seal Assembly; 7/8"

  • Quote required prior to sale to ensure correct fit
41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
PPK3PHM

LiftMaster Passport MAX 3-Button Keychain Remote w/Proximity Sensor

  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufacture since January 1995
  • 3-button keychain remote with proximity sensor
  • 2x the range of standard remote controls
  • Narrow-band transmission
7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

K41-0240-000

LiftMaster Idler Sprocket Qty 2 IHSL24UL

  • 41-0240-000 is a Idler Sprocket Service Kit. Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators. Complete kit includes: (2) Idler Sprockets. Check the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details
15-80B60YMP

Sprocket 80B60T 2.0B 2X 1/2-13"

  • Also known as: 158060
TS-1-135-GALV-KEY

Tube Shaft 1" x 135 (11'.25) Galv w/KW 1/4" x 3/8"

  • When ordering order one foot longer that actual door width
  • Comes with 3 keys 1/4-3/8-3'' long
BEA-35-1566

BEA Power Cable RS-20US IS40

  • Replacement power cable only 35.1566
  • Replaces 35-1195
  • RS-20 US-Colored. Cable gland M16
BPPN17516

Garex Bottom PVC Moulding Black for 1 3/4" Door U shaped 192" (16')

SHSS-38-1

Set Screw Square Head 3/8" x 1"

  • Natural black
  • 16 threads per inch
H11G01-SS

Hinge #1 x 11 gauge Stainless Steel

  • Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

  • RBand is a monitored sensing edge transmitter/receiver system.
  • The receiver can be paired with up to three transmitters.
  • On board diagnosticsallows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
  • .......more details
K41-0243-000

LiftMaster Output Sprocket IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
K41-0256-000

LiftMaster Interlock Harness IHSL24UL

BCSI-PM21

Pivin Drapeau Flat Washer 3/8 Special *** Price by Quote Only

110968.001

Overhead Door Limit Shaft Kit RMX

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K41-0372-999

LiftMaster Drive Sprocket Chain Repair Kit

  • Repair Kit to correct quality issue with TDC1200 & 2200 Maxum trolley openers
  • MAXUM CDO SKUs affected TDC7S1BMC TDC7S4BMC TDC12S1BMC TDC12S4BMC TDC12X1BMC TDC12X4BMC
GALV-283-334-L

Cut-to-Length Torsion Spring .283 x 3-3/4" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
T/F-H/CHAIN-YELLW

Canimex Hand Chain 31.4 Yellow Zinc Plated Sold by Barrel Only 1000ft 173772

  • Yellow Zinc Plated Steel 31.4-19-4.55 sold in 1000' barrel
  • For use with specific Torque Force chain hoists ie 200R (244687)
  • This chain will NOT work in the hoists that use the 30.7-19-5 chain
  • works with Micanan / Nice Commercial operators
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700