Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CB18B1000

Cable 1/8" 7x19 1000' Galvanized ** To Extent of Inventory

Galvanized Cable 1/8" 7x19 1000ft spool.
Cable break strength: 2000 lbs

B/CDJH-12-115-ECB

Lynx CDJH HD Jackshaft with Solenoid Brake 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.

.......more details

K20-1075C-2LP-H27

LiftMaster Electric Motor 3/4 HP 115V 1Ph Logic 5

Also known as: K20-1075C-2LP-H24
Replacement electric motor (3/4 HP 115/230V 1PH L5). For use with various LiftMaster® Logic 5.0 Gear-Reduced Commercial Door Operators

MOTOR383

Manaras Electric Motor 2 HP 208/480V 3Ph

Continuous duty C-flange ODP 60Hz

K13-32087

LiftMaster RPM Cup

SL595UL

K75-37700

LiftMaster Chain Guard and Idler Sprockets SL595U

Complete kit includes: (1) Chain Guard (2) Idler Sprockets.
This replacement kit is compatible with the following models: SL595U SL595UL

GT-100A

Skylink Garage One Receiver Rolling Code ***To Extent of Inventory

Automatic door closer: Never forget to close your garage door again.
Built-in timer from 2 minutes to 20 minutes will close the door automatically.
Audio warning when door is about to close.
Kit includes: Monitor Sensor model: GS-101 and Reciever GC-433R
Advanced Rolling Code Technology
Replaces your traditional wall button with Wall Console

.......more details

O02R9208

AirLift Top Cap Brass Nut w/Rod Seals

SHAFT072

Manaras Input Shaft for MLH 5/8"-18

RR-3-11-6202

Roller 3" UHMW + Rubber 11" Stem Black

3" UHMW tire covered with rubber
6202 sealed precision bearing
11" zinc plated stem
Rating: 200lb load; 100000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

SPR41B36X1

Sprocket 41B36 x 1" Bore 1/4" Keyway

2 set screw 5/16

G3353

GDI Chain Per 2 ft Length

If over 10' loop length is required

RSH-6114-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 120V With Elect. Board N4X Thru Beam Eyes Left Hand

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

OTBH-6232-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 3Ph Monitored Elect. Circuit Board Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain

OTBH-6812-AM-ECB

Manaras Trolley Operator 1/2 HP 208V 1Ph Monitored w/Eyes ECB Apt. Model

A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
30 cycles per hour 100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 chain on all APT models
TTC standard on all models with BOARD070

.......more details

2200-294

Linear Plate Sprocket 41A36 1" Bore

ME110-M-2W-BLK-E

Miller Edge Monitored 2-Wire Black End Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

45DCT125

LiftMaster Circuit Board for various 1.25 HP retail openers

Board: Tri-band Security+ 2.0
DC Chain/ Belt Drive model
Works with 1.25HP retail openers
Also known as: 041D7356‑5 41D7356‑5 45DCT125 1D7356‑5 001D7656‑5

19-5810-NP

LiftMaster Trolley Chain Pack #48 for 10ft Door Nickel Plated

Chain pack only

EL2000SSPKT

LiftMaster Pedestal Mounting Kit for EL2000SS

Compatible with model EL2000SS only.
Kit allows you to mount an EL2000SS unit onto a standard gooseneck pedestal.
Kit includes a mounting plate with gasket and hardware.

HAE00070

Linear LDCO Control Board (841/850/852/863B)

TCBOS-311

Doorlec Single Arm Barrier Gate Op 1/3HP 120volts w/ heater and DC2000 board

Includes 500W heater

ALUM-570

Aluminum 24" x 100' Spool Storm / Gris Orageux # 570

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 570
Reverse side is #431 Bright White

Colour chart

DOCK-LEVELER

Special Order Hydraulic Dock Leveler Custom Order

Custom ordered to customer requirements

Dock leveler brochure

AM-PC-CUSTOM

Linear Proximity Card SecuraKey Custom Coded Linear Format ACP00739C

The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
Custom Coded. Must provide Facility Code and Start #
Dimensions: 3.4" L x 1.9" W x 0.13" Thick

.......more details

P40-10PFO

Hand Crank Reducer 107174

TRACK-SET-2-138-8

2" Tracks Set 8'-0" Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

T108

Manaras Trolley Track 8ft for 3/4 HP models

For models OTH/OTBH/RTBH 3/4hp only with Chain #41

LEVER091

Manaras Open Limit Actuator

TSTRIP001

Manaras 12-Pole Terminal Strip

F210

NICE Adjustable Synchronised Photocells Thru Beam Includes Metal Housing (F210/ FA1)

The beam of the Nice F210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell.
The F210 photocells are available with relay output

OTH-6113-AM06-M

Manaras Silencio APT Operator 3/4HP 120V 1Ph ECB Monitored with Photoeyes

The OTH-AM06 is a silent apartment style low headroom trolley operator
Designed for use on industrial standard lift sectional doors
100 cycles per day
3/4 HP operators come with # 41 roller chain
Ceiling Mount only 7.36" headroom clearance required below the tracks
UL325

.......more details

5009-523-PAINT

Aluminum Touch Up Paint Nail Polish Style Slate / Charbon # 523

Glass bottle and brush applicator

CABLEKIT001

Manaras Comm. Receiver Antenna w/15' Coaxial Cable

BCSI-PM28

Pivin Drapeau Disconnect Coupler BCSI Gate Operator ** Price by Quote Only

BCSI-PM31

Pivin Drapeau Disconnect Lever BCSI ** Price by Quote Only

For industrial slide gate operator

D-2-6-KA

Keyed Disconnect Device 6ft Cable Keyed Alike (Special Order)

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

ALUM-403

Aluminum 24" x 100' Spool Clay/Argile # 403

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 403
Reverse side is #431 Bright White

Colour chart

WHITING-RV-INS

Whiting Stainless Steel Rivet/Mono Bolt Option for ColdSaver Door

Upgrade option

WHITING-PWCS

Whiting White Urethane Topcoat Option For ColdSaver Door Panel

This is an option when ordering a panel

K22-35704

LiftMaster Brake Solenoid 208V

Used on all brands of commercial door and gate operators
2 wire connection

ALUM-5P2

Aluminum 24" x 100' Spool Rockwell Blue / Bleu Rockwell # 5P2

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P2
Reverse side is #431 Bright White

Colour chart

CLUTCHPLATE004

Manaras Clutch Plate 5/8 Trolley

99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

SF514U-W

Spring Fitting 5-1/4" Winding Side Only for 1" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

343.155-CUT

Whiting Tongue & Groove Bottom Panel Plain Primer Only 15-1/2" Cut to Custom Size

Cut to exact size required ** customer must specify
Primer only
Does not come with any hardware no retainer no seal

K87-E-118

LiftMaster E-Ring Idler Shaft

Also known as: 87E118 87-E-118 G87E118
Commonly used with LiftMaster® SL595 Series; and various Commercial Slide Gate Operators

O17R2001

Airlift Automatic Oiler L3000

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

HYBRID-BLK-20

Residential Side & Top PVC/Aluminum W/S with cap 20' Long (241") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

HYBRID-BLK-15

Residential Side & Top PVC/Aluminum W/S with cap 15' Long (181") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

TC3-211-C

Lynx Commercial Trolley Op. 1/2HP 120V for 14' High Door Contactor

GAREX-PVC-W-18

Residential Side & Top PVC Weather-Strip with cap 18' Long (217") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

HYBRID-BLK-7

Residential Side & Top PVC/Aluminum W/S with cap 7' Long (85") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

GAREX-PVC-W-10

Residential Side & Top PVC Weather-Strip with cap 10' Long (121") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-9

Residential Side & Top PVC Weather-Strip with cap 9' Long (109") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-8

Residential Side & Top PVC Weather-Strip with cap 8' Long (97") - White

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

GAREX-PVC-W-7

Residential Side & Top PVC Weather-Strip with cap 7' Long (85") - White

White rigid vinyl retainer with white flexible vinyl seal.
Dual fin vinyl.
Comes with snap-on cap to hide screws.

19-41240D-NP

LiftMaster Drive Chain #41 10' Box Nickel Plated

#41 chain 240 links
Complete kit includes: Drive Chain 10' (#41) and (1) Master Link Kit.

MA002

LiftMaster Connector 12 Pin

Removable connector also known as MA-002

OWL

EMX Microwave Motion & Infrared Presence Sensor

The OWL is a vehicle motion and presence sensor that uses microwave and infrared technology to activate automatic doors and industrial gates.
Featuring two configurable outputs vehicle motion detection as well as presence detection the OWL activation sensor will ensure the safety of people and goods.
Mounting Height: 11.5-21.3 ft (3.5-6.5 m)
Supply Voltage: 12-24 VDC/AC
Dimensions: 9” (229 mm) x 5” (127 mm) x 5” (127 mm)
Connections: 32 ft (10 m) 8 conductor cable directly from sensor

.......more details

Manual Sell Sheet Quickstart Guide

821LMB-2SENSOR

LiftMaster MyQ Smart Garage Door Add-On Sensor Backwards Compatible

This add-on door sensor works with the myQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the myQ door sensor is only compatible with the new myQ Smart Garage Hub by LiftMaster Model 821LMB
Replaces both 821LM-SENSOR and 821LMB-SENSOR and can be used as a replacement for either one
Also known as: 821LM-SENSOR 041D7924-1

MO00006

Micanan Gearhead Disconnect Spring

Dimensions: 0.92ID x 0.09G x 2.00"L

K77-39428

LiftMaster Replacement Cover CSW24UL

Cantilevered cover
Includes labels keys cam-lock assembly
Sliding-latch door for reset switch
Protects internal gate operator components from exterior tampering weather damage

ME123-2M-BLK-RH

Miller Edge Black RH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

GH-383-2

Doorlec Industrial Jackshaft Door Operator 2 HP 208V 3P with ECB

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
Release the operator’s quick-disconnect trolley to open or close the garage door manually
Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required

.......more details

Remote compatibility chart

236515

Wayne Dalton Res. Bottom Bracket Roller Holder LH

Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
Pins & Cotters Included
Top quality galvanized steel
Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
Sold as a single unit

K72-12564

LiftMaster Output Shaft Kit H Prior to 2005

Also known as: 308116010 308116010HK

K16-GT2-7

LiftMaster Timing Belt

3M belt
Durable construction
Resists damage from friction and pollutants
Even stress distribution for heavy-duty operators
For use with LiftMaster CSL24UL CSL24V CSL24VDC
DIMENSIONS: 7.5 in OD x 7.25 in ID

.......more details

E/1929/072

Automatic Systems Round Arm Ass'y 18" (BL229)

Used on the BL229 gate op.

SPR410B18X11/4

Sprocket 410B18 x 1-1/4" Bore 1/4" KW 2S 5/16-18

426-0914

Richards-Wilcox Galvanized End Cap T175-24" RH

02-406-1T

LiftMaster Replacement Switch Key 1 only

Replacement Switch Key.
For use with various LiftMaster® Commercial Door Operators

E/1929/073

Automatic Systems Round Arm Ass'y 19'-8" (BL229)

Used on the BL229 gate op.

GDI-UL325-EYES

GDI Photo Eyes for Monitored Operators N4

PPLK1PH-100

LiftMaster Passport Lite 1-Button Mini Proximity Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Keychain remote control sold in a 100 pack

.......more details

210135

Skylink Chain for 7ft Door

Replacement chain for chain rail

GTO-R550

Nortek Replacement Swing Gate Control Board

BK600/PR-USA

End Bearing Plate Flanged 8-GA 6" with Bearing. Commercial Sold as a pair

For commercial applications Used on wood jambs
Includes (1) RH and (1) LH plate with bearing C16-32F
EBF6" offset USA Style
1" ID

CPT-223-PER-FT

Miller Edge Bulk Extrusion Sold per Foot

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

.187_2"-RH

Torsion Spring .187 x 2" x 12ft RH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

.187_2"-LH

Torsion Spring .187 x 2" x 12ft LH ***NLA

Wire size: .187
Inside diameter: 2"
Length: 12 ft

K23-20523

LiftMaster Interlock Switch 125/250VAC 3A N4

For use with various LiftMaster® Commercial Door Operators

SGO-311-1/2HP

Doorlec Slide Gate Op. 1/2HP 120V w/500w Heater

Engineered to accommodate heavy duty hight frequency commercial and industrial sliding gates with cantilever overhead or roller V track application
It is enclosed in a heavy steel base with 500 Watt thermostatically controlled heater and lockable cover
Three button control O/C/S
Adjustable clutch
Solenoid brake
Universal mount. Left or Right side

.......more details

BEARING047

Manaras Flange Bearing 2-Bolt Black for 1' bore

2 set-screw holes 1/4-28 at 90 degrees. Set-Screws NOT included
Replaces BEARING012

2200-306

Linear Clutch Spring HSLG

Used on various Linear Gate operators

MEL-II-TX10

Miller Edge Monitored Edge Link-II Transmitter

Miller Edge Monitored Edge Link II TRANSMITTER ONLY
Monitors the presence and function of any 10K (T2) monitored sensing edge
Provides a monitored wireless signal transmission from the sensor to the operator controls
Improved immunity to RF interference with 916 MHz operating frequency
Eliminates visible coil cords and retracting reels
Saves installation time

.......more details

2376.192.325.930

Whiting Torsion assembly .192 wire size 32-1/2" spring length 93" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

XBA18

NICE Indicator Lights for L-BAR Arm 26.2ft

The Nice Apollo XBA18 is a 26.2 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the L-Bar barrier gate openers.

XBA4

NICE Indicator Lights for M3/M5BAR 13.1ft

The Apollo XBA4 is a 13.1 ft long line of indicator lights for the click fixture on the upper or lower side of the barrier arm of the M3BAR and M5BAR barrier gate openers.

DS50

Light Commercial Non-Insulated Rollup Sheet Counter Door

Max Width: 12’
Max Height: 6’
26-gauge galvanized steel
Manual lift operation
Slide bolt or curtain lock

CP-BR-ASSY-575V

Lynx Brake Kit with 575V Solenoid CDJH

Complete brake kit with solenoid

OS-10X24-B-W

Garex Overstock 10'x24" Premium White Bottom Panel

One overstock bottom panel brand new.

EHJW-311-1/2

Doorlec Ind Jackshaft Op. Watertight ECB 1/2 HP 115V-1Ph

Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
Solenoid Brake prevents coasting and secures the door when closed
TEFC (sealed) continuous duty electric motor with overload protection
Automatic Friction Clutch protects the door and operator
Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications

.......more details

CDJH-12-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V with ECB UL325

New LX100 circuit board.
Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.

.......more details

MF00045

Micanan H.H Slotted Self Rounding Washer Head Screw 8-32UNF x 3/8"

VFOH5011

LiftMaster Variable Speed Front of Hood Op. 1/2 HP 120V with CPS-U

Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard

.......more details