Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery
Codes: Factory block coded in MegaCode format
RF frequency: 318 MHz
Dimensions: 2.2" W x 3.8" H x 0.9" D
Same as: ACP00746

CHAIN031

Manaras Jackshaft Drive Chain #50 5' with Link

ER294-K

Heddolf Long Range Receiver 433 MHz

Up to 1500ft range
Compatible with EX220-1K

1A4324

LiftMaster Steel Angle Hood Mount Bracket

Heavy-gauge steel bracket used for vertical or horizontal mount for either front or top of coil mount.
May be welded.
For use with LiftMaster Model DJ DH MGJ GH J and H.
Cannot be used with Model GH 3HP.

8X118-WHITE

Fasteners Wood Screws painted White 1000/Box

Ideal for residential weatherstrip

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

200BL-10

2" Light Brush Insert 10ft Long

Polypropylene bristles
Same as MS1703-120

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

C-123-L

Aiphone Door Answering Intercom System

Door answering intercom system for home or business
Master room station: 7-1/2" X 5-1/8" X 1-3/4"
Door station: 4-3/4" X 3-7/16" X 1-1/8"
Power supply 6V DC 800 mA not included

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

COAX-5-RG6

Coax Cable Assembly 5 ft

Assembly includes union

PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 523
Reverse side is #431 Bright White

Colour chart

07-8058

LiftMaster Crank Link BG790

MET-14500C

Cable Tie Metal Tooth 14" 50 LB Black 100/Bag

L-7-50-0-M

Cable Tie Standard 50 LB Black 7" Nylon 1000/pkg

Ultraviolet Resistant

SETR2641AM2C

Erone 2-Channel Mini Transmitter Dark Red 433MHz

Heavy-duty construction
Elegant & easy to carry
Light grey and dark red base with dark red buttons
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

ALUM-562

Aluminum 24" x 100' Spool Commercial Brown # 562

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 562
Reverse side is #431 Bright White

Colour chart

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

H12G10-SS

Hinge #10 x 12 gauge Stainless Steel

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

27-24301

Truck Door Single Torsion Spring Assembly 89.5/48 for Todco Roll-Up Doors

Single counterbalanced spring design available in 36" 48" and 60" spring lengths.
Shaft Length: 89.50" Spring Length: 48" Wire Size: .243
Right hand wound
Quick and easy counterbalance spring adjustment with easy calibration to door size and weight for effortless operation.
Springs treated with rust preventative
Heavy .243 dia. spring wire

.......more details

PS324

Nice Battery Backup

Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)

39142R

Genie Aladdin Connect

Aladdin Connect™ controls and monitors your garage door opener with your smartphone
Compatible with smartphone iPad(R) & tablet devices
Easy installation & setup
Operates up to 3 doors with 1 system
Able to program timed closed functions
Wi-Fi communication Retro-fit capable Works with all brands

.......more details

Quick set-up guide Guide d'installation rapide

Z9207

Sensor Guards Sold as a Pair

Made to fit over garage door sensors
Will fit over most popular sensor brands
Protects sensors from coming out of alignment
Helps protect against water corrosion
Easily installs to the door track or the the wood door frame
Sold by the pair

.......more details

Z9205

Door Scale Arm

Counter balance lever arm and a common bathroom scale will allow you to weigh a door up to 1250lbs
Set door on shaft and multiply scale reading times 5 to give you the door weight
Bathroom scale not included

Drawing

MALEDCW

LiftMaster Counterweight for 17ft LED Arm

For use with MALED17 17 ft. LED Arm for MA/MAT

41A5021-1G

LiftMaster Receiver Logic Board (41A5021-1I) **to extent of inventory

This circuit board works with Security+ openers with no light socket.
Same as 41A5021-1I 41a5021-3E 41A2021-1 41A5021-1B 41A5021-1C 41A5021-1D 41A5021-1E 41A5021-1F 041A5021-1G 41A5021-1H

111854.0001

Overhead Logic Board for RSX 1/2 Hp 115/208/230V 1PH *** By quote only

Description: KITPCB1PH1/2HPSX/HXUL10
For RSX ad RHX models 1/2 Hp Single phase operators

Replacement Instructions

79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

Same as K79-16088

41D7675

LiftMaster Receiver Logic Board 2.0

Also known as: 45ACT

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

The DC motor offers additional benefits with very quiet operation and much less vibration.
It is ideal for garage doors that are below a living room or bedroom.
The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
Available in either Belt or Chain drive
Includes two 2-btn keychain remotes # MK318-2

.......more details

Installation Manual Sell Sheet

R5995

Shaft Collar 1-1/4" Double Split

GD-LITE-1224134

Lynx Thermo Window 12" x 24" x 1-3/4" White

BIG-METRO-1PKG

NICE Big-Metro Single Arm Kit

For swing gates with leaves up to 5 m
Underground installation.
BM5024 Motor: Irreversible 24 Vdc with magnetic encoder complete with connecting lever and mechanical stop for the closing manoeuvre.
Compatible with 2 foundation metro boxes externally chamfered with mechanical stop on opening: in stainless steel (BMBOXI) ideal for use in extreme conditions and with the new cataphoresis paint finish (BMBOX) highly resistant to corrosion.
Maximum freedom of choice: release from inside or outside two key or lever operated models freely combinable and easy to operate with just one hand.
Recommended control unit: Moonclever MC824H Features: Simple programming by means of a single key;

.......more details

1007-1-5/8-8

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

For door thickness of 1-5/8" to 1-3/4"

97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

Same as part number 96834
For belt rail

Replacement Instructions

RS10295

Roller 2" Steel 9-1/2" stem 10 ball Hurricane Roller

High strength steel roller designed for hurricane applications
Wheel Diameter: 2"
Steel tire Stem made from alloy steel
Rated: 15000 cycles for a 12'h door
Load rating: 75 lb
Box qty: 100 Box weight: 62 lbs (2-9-1/2-10 steel)

.......more details

22-460

Brake Solenoid 440-460V

Used on all brands of commercial door and gate operators
same as MK-00028

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

Compatible with 300 MHz Multi-Code receivers
Supplied with visor clip
Easy access to battery and coding switches
Power: 9-volt battery
Codes: 512 codes for each channel (set by dip switches)
RF frequency: 300 MHz

.......more details

Installation Manual

Z9965

Bearing Blaster

Fast and easy way to remove and re-seat bearings into bearing plates
Works for both 1" and 1-1/4" bearings
Instructions included

Instructions

16FT-TROLLEY-SET

LiftMaster 16ft Double Angle Rail Set for Comm. Trolley Ops 10-5816-P (2 pcs) *Actual length 227"*

Double Angle Rails for doors up to 16' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
Actual Length 18' 11"

39-10167

LiftMaster Clutch Disc for MH

EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are both ends of every slat.
Rivets included with endlocks

2G-RIGHT

Rolling Steel 2" Curved Stamped Endlock Right Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlocks

BK101/PR

Spring Anchor Bracket USA 8-Gauge sold as a pair

Universal spring anchor brackets - Residential/Commercial
Centerline adjustment: 3-5/16" to 6-3/4"
Bright zinc plated 8 gauge steel
No bearing
Bearing R5110 sold separately

RN0029-SS

Roller 2" White Nylon 9" Stainless Steel Stem Double Sealed Bearing

A supreme double sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
200 lb load 50000 cycles

PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

Wand only
Requires CS101 (Carsense-101)

BK308

Jamb bracket J-08 #8 12 gauge

Sold by the piece
Height 4.00" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

801-300-001-01

Equinoxe Long Range Receiver 1-Door 433 MHz New Generation

1000 ft range
2016 +
This receiver will accept 8 equinoxe O/C/S remotes

Programming Instructions Instructions de programmation

CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

SSNT-1

Super Sneaky Low Headroom Garage Door Hinge No Tabs Sold as a Pair

SSNT version designed to accommodate top panel struts. Eliminates troublesome & costly double track kits.
No tab design for doors with built-in or requiring a top panel strut
100% effective in 6" headroom
Provides maximum headroom clearance & smooth operation
Self positioning easy install & works on all residential doors
Works with all draw bar type automatic operators

.......more details

T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CLUTCHPAD007

Manaras Clutch Pad 1-3/4" ID 5" OD

PPK3M

LiftMaster Passport MAX 3-Button Keychain Remote

Provides total control with one remote for gated communities and commercial properties.
Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)

Programming Instructions Instructions de programmation Sell Sheet

20418R

Genie Limit Switch Lead Wire Brown

Brown - Used to connect down limit to sequensor
For Screw drive models

Z9200

Cable Snubbers Sold as a Pair

Prevents slack from forming in cables
Sold in pairs

Installation Instructions

7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

MD00017

Micanan Drive Sprocket 50B23 x 1" Bore 1/4" KW

MK-00648

Micanan 1-Channel 24V Receiver with Antenna

Comes with antenna MK00719
Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660

Programming Instructions

7001-9-BLACK

Commercial Side & Top Weather-Strip 9' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

23-2016

LiftMaster Limit Switch

Limit Switch for the VSL595

764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Brake standard on all RBH operators
#48 chain #50 output sprocket chain
Comes with CPS-U photoeyes and 02-103 O/C/S push button

.......more details

Installation Manual Manuel d'Installation Sell sheet

41A5389-1E

LiftMaster Receiver Logic Board

For low profile screw drive models with one light
Fits models 2110 2220

Replacement Instructions

SSZP24

Solid Shaft 1" Keyed Zinc Plated 24'

751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

7/16" Head
Indented hex washer head
Max RPM = 2000

36-RWB-PAIR

Winding Bars Round 36" Set of 2

Cold rolled hardened steel.
Machined to 1/2" at one end with 5/8" outside dia. on the other.
Sold as a pair.

61LM

LiftMaster 1 Button Transmitter Dip Switch 390MHz *** To Extent of Inventory use 811Lmx instead

For openers manufactured from 1984 - 1989
Liftmaster models: 1040 1045 1046 1050 1055 1056 1060
Wayne Dalton models: 100WD 200WD 300WD
Chamberlain models: 140 150 240 350 450 550
Sears Craftsman & Master Mechanic models (see paragraph below on the manufacture date)
For openers manufactured from 1990-1992

.......more details

Programming Instructions Instructions de programmation

178B34

LiftMaster Straight Door Arm

Will work with most residential garage door openers
Also known as: 012385041783 178B33 178B34 4178B0034B

ETB-311-1/2HP

Doorlec 1/2HP 115V Trolley Door Opener TEFC Motor

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
DC2000 Logic Controller
Comes with standard O/C/S push button station

75-10170

LiftMaster Trolley-Slider Assembly (08-10169)

For LiftMaster trolley models MT T GT
Also known as: 307085008 75-10170 08-10169 085008 7510170

165-B

Fusible Link For Loads 1 to 10 lbs

Length is 1.4328" width is .563"
Distance between center is .938"
Priced per each
Fire rated at 165 degrees Fahrenheit

3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

Brake assembly does NOT include the solenoid

AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

To be used with metal case part # AIRSWITCH008

D111904

Mitto B RCB02 2-Channel Transmitter

Compatible with Lux 2B gate operator

HOMELINK-REPTR

LiftMaster HomeLink Repeater Kit ** same as 855LM

All 2006 or older vehicles require a repeater kit installation
In 2007 and newer if the HomeLink does not program with opener install a repeater
The remote supplied in the repeater kit must be kept for future programming and is NOT to be used as a garage door opener remote

Programming Instructions

CPS-RN4

LiftMaster Retro-Reflective Commercial Protector System with Nema 4 Enclosure ** DISCONTINUED

Utilizes a sending/receiving retro-reflective photo-eye and a specially designed polarized reflector that increases obstruction detection reliability
Polarized photo-eye design for a safe retro-reflective photo-eye system
Designed as a normal open circuit but not a self-monitoring system (does not incorporate industrial code technology)
Range up to 30 ft - indoor use only
24VAC operation
Color: Yellow

.......more details

Installation Manual

LA500-SLR-PKG

LiftMaster Solar Package for LA500 Gate Operator

Solar package includes: 2 - 33AH batteries 2 - solar panels (SOLPNL20W12V) battery harness (LA500SLRHARN) and the battery tray (K10-36183).
Must be used with the LA500-1PKG-XLM
Solar option NOT compatible with LiftMaster Internet Gateway
Solar option not recommended in certain areas - please call before ordering

Installation manual Manuel d'installation Sell sheet Brochure

MV-00023

Micanan 1-Door O/C/S Transmitter CT-1 313 MHz

Programming Instructions

MV-00026

Micanan 24V Commercial Receiver CR32-24V

Programming Instructions

G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

Increases one number each time current is applied
Connects to the 24 volts of contactor coil
Simple 2-wire connection
Same as 50-12862

8FT-BELT-LDO

Linear 8ft Belt Drive Rail for LD050/LS050/LDCO (HBT8C)

8ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

7FT-CHAIN-LDO

Linear 7ft Chain Rail for LD050/LS050/LDCO (HCT7C)

7ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 carriage house I-rail conversion kit

25-10301

Truck Door Heavy-Duty Cable Anchor Bracket Black for Whiting Roll-Up Doors

Steel construction
Allows proper rotation of cable head
Cross ref: Whiting 5803

41D7742-7

LiftMaster Travel Module

Fits models 8165 8355 & 8155W

11-3602_SHAFT

LiftMaster Idler Shaft (1)

Fits SL595
Two are required per operator

SELWR433

Erone Wiegand Receiver 433 MHz

26 bit
12-24V AC/DC input voltage

Wireless System Chart

BOARD075E

Manaras Replacement Board Kit (No Monitoring)

Replacement kit that includes BOARD070E (control board) & BOARD066R (power board)
BOARD070E is for standard operators without the monitoring function
For all Manaras operators built after October 2010
On-board 390MHz radio receiver accepts 50 remote controls
For older models built before October 2010 use BOARD060 or replacement kit BOARD065