Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search rbh501l5
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
  • Same as: ACP00872
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00018

Linear Inner Slide Assembly - Chain (HCT)

  • For LSO50 LDO33 & LDO50
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
1003-6.5"-100FT

Bottom U-Rubber 6.5" Black 100' Long

  • 100ft spool of vinyl insert.
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
371LMC Manual
DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

  • Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
  • Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
  • 8-dip switch 64 selectable codes
  • Same as: DNT00027B or DT4A
  • 310 MHz frequency
Programming Instructions
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

  • Aluminum retainer with black dual fin vinyl
25-42-240

Extension Spring 7' Door - 240 lbs Blue w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
973LMC*

LiftMaster 3-btn Security+ Transmitter 390MHz - DISCONTINUED

  • 390 MHz Secruty+ three button visor tranmsitter
  • Compatible with Security+ systems including Chamberlain Sears Craftsman and Raynor Openers (Safety Signal) manufactured 1997-2005
  • Visor clip and battery included (part # CR2032)
  • Same as 973LM 96LM 953CB 956CB
  • Discontinued 12/31/13 - Replacement options 375LMC 890MAX 893MAX 892LT 894LT
27-24400

Truck Door Dual Torsion Spring Assembly 87/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 87" Spring Length: 33" Wire diameter: .182 - Winding cone color: Green
DM54

Cable Drum High Lift 54" 5250-54 Pair

  • 54" High Lift aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH.
  • Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
  • Rated lift per drum: 500 lbs 1000 lbs per door max
  • Maximum cable diameter: 3/16"
    • .......more details
27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

  • Cast aluminum construction
  • Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
  • Angle of cable slot determines left or right drum.
  • Holds up to 130" door cable
  • Cross Reference: T #59033-1 T #59129-1 W #4013 330100
DM518

Cable Drum Standard Lift 18' 5250-18 Pair

  • 18' standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH.
  • Color coded: Red=LH and Black=RH
  • Max. Door Height: 18'-1" Rated Lift per Drum: 750 lbs.
  • Max. Cable Diameter: 3/16". Mounting: 1" solid shaft with 1/4" keyway
  • Cross Reference: D525-216-1 DNS 5-18 OMI 2200
    • .......more details
HD8460-200

T-Handle Cable Lock System 2"

  • Complete cable locking system for a 2" door.
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
Z9403

Coupler 1" Bore Adjustable

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
SF200

Spring Fitting 2" Pair

  • Unviversal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding and (1) stationary.
  • Maximum wire size diameter: .3065".
  • Set screw installed: 3/8"-16 x 1" (2).
  • Mounting: 1" tube or solid shaft
  • Winding bar hole 1/2"
    • .......more details
R5110

Bearing 1" Commercial

  • 1" inside diameter 2" outside diameter
  • 1" steel bearing allows the shaft to rotate securely on a garage door assembly
  • Same as part number 235
  • C16-32F*4
HD3120

Commercial Inside Slide Lock for 2" or 3" track

  • Track use: 2" or 3"
  • Throw: 2-11/16"
  • Offset from inside face of door to lockbar: 1/2"
  • Bright zinc plated steel with spring actuated lock bar.
  • Same as part number 270
41C4220A

LiftMaster Chain Drive Gear & Sprocket Assembly

Installation ManualManuel d'Installation
25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

  • Zinc plated Hardened shaft and raceways
  • Seven roller ball design
  • Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
  • Box quantity: 25
6X12SC50

Devanco Loop 6' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP. Stops are not zinc plated
SLT4-18

Rolling Steel 3" Crowned Slat 18-ga Galvanized

639T

Allstar 3-btn 9-Door O/C/S Transmitter 107476 318 MHz ***Replaced by P-639T

  • Open/Close/Stop remote for 9 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MK-01179

Micanan Telemecanique Contactor Kit 24V **use code MK-00493

  • LC2K1210B7 mini contactor
CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

  • One Piece Solid Rubber
  • Integral Handle
  • Long Lasting 80 Durometer rubber
  • Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high
009145

Allstar Rear Idler Sprocket *** No Longer Available

  • Allstar Allister Rear Idler Sprocket new # 009145 replaces X145
  • for Allstar/Allister models including ARD-II A Access 200/250 Access 2000/2500 Access 3000/3500 PDQ and Allister Century Series 310/510/710
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
RADIO-EM901

Manaras 1-btn Mini Transmitter 313 MHz

  • Open/Close mini remote for 1 door
  • Comes with LED battery life indicator
  • Mini 12V battery included
  • Key chain holder included
  • Replaces RADIO-28
  • 10-dip switches
    • .......more details
5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 525
  • Reverse side is #431 Bright White
Colour chart
G5MC-B

Skylink 1-Button Universal Keychain Remote with Bracket Black ***Discontinued

  • Operates most national brand garage door openers up to 2010 (see compatibility chart).
  • Small enough for carrying in a pocket or purse.
  • Fits in any new car remote housing compartment.
  • Ideal for convertibles motorcycles and bicycles.
  • Operating range of 100 feet and more.
  • 12-volt alkaline battery included.
    • .......more details
Programming InstructionsCompatibility Chart
MGS20-Y-2U-06

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 6ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
PS324

Nice Battery Backup

  • Kit of 24 V batteries complete with battery charger for powering automations for automatic gates and doors in the event of a mains power failure
  • Ambient Operating Temperature: from - 20 to + 55°C (battery efficiency is reduced in proportion to a decrease in temperature at -10°C efficiency is 30%; the battery lifetime decreases on an increase in temperature; at 40°C lifetime may be reduced to 2 years)
1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black dual-fin vinyl
15055

Doorlec Electronic Thermostat 330V B1 Metal

K001D8397-1

LiftMaster Power Board 3ph 575V L5

  • This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense
T-832-M-H

FL-Heddolf 2-btn Mini Transmitter P219-2K-311 MHz (T-832-M-S)

  • Open/Close mini remote for 2 doors
  • Keychain and 12V battery included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P219-2K
R5201

Cast Iron Pulley 3"

  • Bored for 3/8" diameter bolt
  • Cable diameter: 1/8"
  • Cast iron pulley mounted on two pressed sealed bearings.
  • Radial Load: 400lb
TRACK-GUARD-24

Track Guard 24" Tall Safety Yellow With Base Sold as a Pair *** NLA

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: 60-5090 (right) and 60-5091 (left) sides
    • .......more details
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
    • .......more details
Installation manualSell sheet
ATV320U15M2C

Pivin Drapeau Telemecanique Variable Speed Controller 200/240V 1PH 2HP

GALV-306-6-144-R

Torsion Spring .306 x 6" x 12ft RH Galvanized Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-306-6-144-L

Torsion Spring .306 x 6" x 12ft LH Galvanized Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
K41-0252-000

LiftMaster Gear Reducer IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators
CP-SH-34-MC3-65

Lynx Complete Limit Shaft Assembly #65 Chain

  • For trolley operator
5001-8-CREAM

Residential Side & Top Weather-Strip 8' Long - Cream

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
IP-MONB

CDVI PoE Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
  • IP system connects through PoE and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Also available in white: IP-MON
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
    • .......more details
S504AL

LiftMaster Monitored Small Profile Resistive Edge w/Aluminum Channel 4ft

  • Meets 2016 UL 325 requirements Edge sends signal to stop and/or reverse operation when sensing obstructions
  • Fast easy to install mounts vertically or horizontally
  • Compatible with Wireless edge kit LMWEKITU Transmitter LMWETXU and LiftMaster Gate Operators with Monitored Safety Inputs
RCB-DCB2-PRO

Pro Cut Handheld Chain Break #50 Chain Max

  • Heavy duty; max capacity of #50 chain
  • Smooth and easy to use
  • Includes 2 extra replacement pins with purchase
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
HARNESS116

Manaras Opera ECB070 and Drive

BCSI-PM07

Pivin Drapeau Lock Washer 3/8" *** Price by Quote Only

086565.1013.S

Overhead Door Chain RLR #25 x 62P Loop

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

10-LHB

BEA LZR Housing Bracket

  • Housing bracket for the LZR-H100 sensor
BEA-35-1242

BEA 30' Harness 8-Conductor LZR

  • Power cable LZR-I100
B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

  • 3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
SPR50B42X114-3/8

Sprocket 50B42 1-1/4" shaft 3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

  • Power Supply: 12-24 Volts AC/DC
  • Current Consumption: < 9 mA
  • Operating Temp: -40°F to 180°F
  • Surge Protection: Zener Diode /MOV
  • Output Relays (2): 1Amp 30 VDC
  • Loop Input: Transformer isolation lightning and transient protection (1)
    • .......more details
Manual - LP-D-TEKSpec Sheet - LP-D-TEK
NEW-HAMP-XL

Garex Ready to Install Country Style Special Order

  • Insulated garage door designed to be energy efficient with R-16 thermal resistance value
  • With 11 vertical lines featured in the embossing adding a more contemporary touch
  • Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
BOARD076R

Manaras Replacement Power Board

  • Used on all Manaras circuit board type operators
GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

  • Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
  • 4L V-belt primary reduction #41 drive chain and sprockets.
  • Adjustable friction clutch Inherent Mechanical Brake included
  • Solenoid brake optional **
  • Fully driven adjustable limit switches.
  • Heavy duty 3 button wall station (Open Close Stop).
    • .......more details
GALV-375-334-L

Cut-to-Length Torsion Spring .375 x 3-3/4" Left Hand Wound Galvanized Yellow/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
  • Galvanized
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
2807.177*290

Whiting Spring Assby .177 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 29" Long
  • For Roadside order part # 2806.177.290
GALV-273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
3228.3

Whiting 2" Nylon Roller 3" Stainless Steel Shaft

  • This is a Whiting original roller
210339

Skylink Belt Gear with Holder LQ-803

Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

  • Compatible with various LiftMaster® Swing Gate Perimeter Access Systems
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

  • 10ft length
CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

  • For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

  • 21" panel = 4 grooves 24" panel= 5 grooves
  • COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
  • Minimize the heat transfer between the inside and outside of your garage.
  • LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
  • WOOD END BLOCKS Suitable to receive steel end caps
  • HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor
    • .......more details
SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

K41-0388-000

LiftMaster Main Board w/BBU 700/1200 JHDC

8087.207.320

Whiting .207 x 2-5/8 IN x 32" Curbside with Cones

  • An original Whiting assembly
FOHMODDC

LiftMaster Front Of Hood Mount Bracket Kit

  • For use with various LiftMaster® DC JDC and JHDC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
  • This mounting bracket kit is utilized for front of the hood installation.
  • Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.
GALV-393-6-144-R

Torsion Spring .393 x 6" x 12ft RH Galvanized Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized Stenciled
WA7102

MBAR Security Key for Manual Over-Ride (1 Key)

MD-00033

Roller Chain #60 10' per Pack

31111-114

Doorlec Sprocket 50B70 1-14" Bore KW/SS

XF600VAC12

LiftMaster 600V Transformer Kit 1200

  • For use with various LiftMaster® MAXUM Series DC 1200 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
  • will supply a maximum of 12.5 amps on 120volts
K005-KEY

Replacement Key for 3BXLT Key #5

  • Replacement key only for key #K005
SPR410B12X5/8

Sprocket 410B12 x 5/8 K3/16 2S1/4-20

MA035RDOT

LiftMaster 9ft Square PVC Barrier Arm Only (Articulating Hardware NOT included)

  • 9' Square Arm
  • PVC
  • Red & White Retro-Reflectorized DOT Tape
  • Hardware NOT included
2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

  • Fits HSLG GSLG-A Ups
OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
XF600VAC7

LiftMaster 600V Transformer Kit 700

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. Standard-Duty and Industrial-Duty Commercial Door Operators
041-0347-000

LiftMaster Camera Replacement Kit

  • Compatible with models featuring a yellow learn button and Secure View™ Video Camera; manufactured after 2021 only.
6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 7.04" Overall Length 5.96" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
K41-0157-000

LiftMaster Cable Tension Monitor Right Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0156-000 for Left-Side Cable Tension Monitor