Devanco Canada - Get The Right Garage Door Opener‎ and Parts

25-10250

Truck Door Bottom Fixture for Todco Roll-Up Doors

Steel construction Zinc plated finish
Cross Reference: T #69249 T #61352 W #4003 230000

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

IRB-4X

EMX Industries Nema 4 Through-Beam Photocells with Hoods *** No longer available

Outdoor and carwash through beam Commercial Photocells.
Up to 115' sensing distance
Electronic sunlight filter
Automatic compensation for temperature changes
12 to 24VAC/DC input voltage
one form C relay (NO and NC output)

.......more details

Installation Manual Sell Sheet

6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

971LMC

LiftMaster 1-btn Security+ Transmitter 390MHz

390 MHz Security+ single button visor remote
Compatible with Security+ systems with Amber learn button including Chamberlain Sears Craftsman and Raynor code rolling residential openers (Safety Signal) manuifactured 1997-2005
Visor clip and Lithium battery included (part #CR2032)
Same as 971LM 91LM 950CB 950CD

Programming Instructions

25-60407

Truck Door Rear Frame Conversion Bulk Kit with 7" Header 2" Wide

Converts swing doors to roll-up doors by removing the old swing doors and weld conversion corner post and header in its place
Vehicle is now ready for roll-up door installation
Corner post has added lip length to allow easier weld during installation
Steel construction .125 thick
Each bulk kit includes two (2) corner posts and one (1) header
Plain finish

.......more details

GK-BX

Genie Dual Frequency Wireless Keypad 37224R

Temporary PIN codes to allow for one time special access needs
Able to operate up to three Genie Intellicode garage door openers
Auto-seek dual frequency technology automatically transmits in both 315 and 390 MHz
Compatible with Intellicode 1 and Code Dodger series

Programming Instructions

880LM

LiftMaster Smart Control Panel Sec+ 2.0 ***Discontinued replaced by 880LMW***

Menu-driven panel gives you complete control of the garage door opener; easily view inside garage temperature time and system diagnostics
Equipped with the Maintenance Alert System
On-board programming capability makes it easy to program remote controls and MyQ enabled accessories and adjust settings
Timer-to-Close automatically closes the garage door in 1 5 or 10 minutes; custom setting from 1-99 minutes
Displays Fahrenheit or Celsuis
Motion detector automatically turns on garage door lights when movement is sensed

.......more details

Installation Manual Manuel d'Installation

7001-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black (Code B)

Black galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

.343-6-L

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

17310

Doorlec DC-3000T2 2-btn Transmitter 313 MHz

One block of 10 dip-switches for programming
Will activate 2 Doorlec 17307 receivers (DC-3000R)
Includes visor clip and 9V battery

Programming Instructions

FMB01DW24

Timer Multifunction 11-Pin

Carlo Gavazzi multi-function timer
Time range 0.05 s to 300 h
Knob selection of time range
Knob adjustable time setting
Knob selection of operating mode (6 functions): A - delay on operate B - symmetrical recycler OFF first B2 - symmetrical recycler ON first C - signal ON/OFF delay D - delay on release E - interval
Manual start

.......more details

71B120G

LiftMaster Brake Kit 115V with Solenoid Field Install SL585 and SL595

Instruction Manual

.250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

29-NP712

Lead Acid Battery 12V 7A

same as MBAT and K74-307622

1104-16FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 16' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

733

Fasteners Flat Washer 5/16" Zinc 1000/Box

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

32-34792

LiftMaster Gear Reducer Nema 56C 30:1

Compatible with LiftMaster® Model SL585 Slide Gate Operators
Same as K32-34792

UTIL013

Utility Switch Roller Lever Arm

Telemecanique # ZCKY-41

230404

Linear Motor Control Board 5 Relay (w/Brake)

For commercial door operator

60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like Bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Steel
Size: 8" wide x10-1/2" long x 9-1/4" high

MX00140-NEW

Micanan Brake Assembly for PRO-TB/APTB NO Solenoid - New Model

1001-12-GREY

Commercial Side & Top Weather-Strip 12' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1003-4"-PER-FT

Bottom U-Rubber 4" Black Sold per Foot

PRO-GH-7583U-R

Micanan 3/4HP 208V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

.312_3-3/4"-RH

Torsion Spring .312 x 3-3/4" x 12ft RHW Yellow

Wire size: .312
Inside diameter: 3-3/4"
Length: 12 ft

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

LD-11B

EMX Base Socket 11-Pin DIN Rail Mountable Black Block Style

For use with D-TEK detectors
Special Order Only
Narrow profile

K41-0253-000

LiftMaster Electric Motor INSL24UL

Compatible with LiftMaster® INSL24UL Series Industrial Lite-Duty Slide Gate Operators

CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

Electric motor only with instant reverse

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

3B4X-SS

Control Station Exterior Stainless Steel Enclosure Surface Mount O/C/S N4X

OPEN-CLOSE-STOP Push Button
Stainless Steel Enclosure
Buttons aligned vertically
Dimensions: H=6-3/4"” W=3-1/2"” D=3-1/2"”

GALV-393-6-144-R

Torsion Spring .393 x 6" x 12ft RH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

5001-10-BRONZE

Residential Side & Top Weather-Strip 10' Long - Bronze (FF)

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

BEA-10ULTIMO

BEA Automatic Sliding Door Sensor

Dual technology sensor for sliding doors: the microwave motion field activates as people/objects approach as the infrared curtains ensure the safety of pedestrians passing through the door opening.
Provides uniform sensitivity across the curtain.
Ideal for high-traffice environments such as hospitals hotels airports or retail facilities.
Mounting height: 6'6 to 11'6 •Operating temperature: -13 to 131F
IP54

44-60-160

Extension Spring 10' Door - 160 lbs

Clipped ends
44" long 60" stretch 160 lb load

CA-129-512

Continuous Angle 1-1/2" x 5-1/2" x 129" L Sold as a PAIR

OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

5-30-4

3" Vertical Track 12-GA 9'-3" (10' door) Sold per Pair

Punched track .102 x 112"

E/1929/023

Automatic Systems Balance Spring Ass'y 5.5 MM BL229

Used on the BL229 gate op.

10TD900TR

Transmitter 900mhz Touchless Wireless Converter

Allows wireless door activation without the need to run additional wires to easily change existing door configurations from hardwired push plates to touchless door actuators.
Microwave doppler technology allows for consistent and reliable detection.
For automatic door apllications.
Compatible with 10RD900 and 10BR2900 receivers.
IP65
Nema 4

.......more details

LPEXP

LiftMaster CAPXL Loop Detector Input Board

Automatically trigger a phone call to a guard or office when a guest arrives
Mounts inside of CAPXL
Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
Operating Temperature -20°F to 130°F (-29°C to 54°C)
Dimensions: 2.8” x 2.3”

CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
Pre-Wiring included for postal lock device (not included).
Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
Dimensions: 14” x 6.5” x 1.4”

E14500D

Cable Tie KSPEC STD 50 LB Black 14" Nylon 500/pkg

Length: 15" Width: 5.0MM (0.187")
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

15-50B50QGH

Sprocket Kit 50B50 1.25" Bore x 1/4" Key w/ SS

WHITING-ST

Whiting Strap Mounted Inside Door Option

This is an add-on option when ordering a Whiting door

5-38-10

2" Horizontal Track Set 8'6" (7ft Door) 10" Radius 16ga 2-pcs

Left/Right hand horizontal track set 10" radius
Garage Door Residential usage

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

ME00048

Micanan Keyway 1/4 SQ x 3/4" Long

OPH-6214-M-N1-LH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

K001A6407-1

LiftMaster Logic Board Absolute Encoder

Compatible with LiftMaster® Models RSW12V and RSW12VH Swing Gate Operators

ZAP-8800-3-PB

Zap Control Box Assembly for ZAP8800

2705.177_13.5

Whiting Curbside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

2704.177_13.5

Whiting Roadside Torsion Spring 2-3/16" ID 13-1/2" Long

Torsion spring wire only
.177 wire size

S50E-PAIR

LiftMaster Small Profile end kit for one edge only 8.2KOhm resistance

Fast easy to install and cost effective system no glue is required
One end for output wire other end with resistor for monitoring
Compatible with S50 Small Profile Edge
Includes: (1) set enough for one edge
p/n 1804-1463

2376.162.19.770

Whiting Torsion assembly .162 wire size 19" spring length 77" shaft

OSH-6214-M-N1-LH

Manaras Opera-SH 1 HP 240V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

SB258100-PAIR

Garex End Bearing Plate Reinforced 2-5/8" - 1" Residential Sold as a Pair

TDC7-14

Liftmaster Comm. 14FT Trolley Angle set (10-5814-P x 2) and #48 chain pack (TDC48-14) ***Actual length 203"***

Double Angle Rails for doors up to 14'6" high
Includes #48 chain pack

343

Cable Clamps Galvanized 3/8" Sold per piece

Galvanized malleable cable clip

IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
Thru beam configuration
UL325 compliant
Four (4) monitoring interfaces
115 ft. operating range
Easy installation and set-up

.......more details

70598.000

Todco 1" Nylon WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

70600.000

Todco 2" Nylon Sealed WondeRoller

Special Order Item
Perfect for dry freight applications this roller has been tested to last 5 - 10x longer than a standard roller.
A fully sealed bearing to keep dust and debris out
2 Inch Track WonderRoller is a nylon-coated-stem track roller for larger application panel truck doors
Polymer vinyl roller head couples with this stem to suit the constant up-and-down and roadway jostling on a freight or other large truck
Roller prevents build up in bearings with a sealed external washer

.......more details

GALV-295-6-144-R

Torsion Spring .295 x 6" x 12ft RH Galvanized Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

OGH-6534-M-N1-LH

Manaras 1 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

CGH205L5-LH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

GALV-319-334-144-L

Torsion Spring .319 x 3-3/4" x 12ft LH Galvanized Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

Wire size: .243
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

Designed for use on standard high and vertical lift sectional doors
Can also be used on small rolling doors and grills
Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
Mechanical brake
Floor level disconnect mechanism which must be engaged for manual push-up operation
14 cycles per hour 50 cycles per day

.......more details

K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

Also known as: G233001 233001 23-3001
For use with various LiftMaster® Commercial Gate Operators

MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K41-0156-000

LiftMaster Cable Tension Monitor Left Side

For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor

XF208VAC12

LiftMaster 208V Transformer Kit 1200

INFLAT-DOCK-SHLTR

Inflatable Dock Shelter *** Made to Order Sold by Quote Only

Custom order item. Sold by quote only

BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

Bracket only for modular LED lights.

2200-540

Linear Replacement Key for BG Snap Lock

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

This item is compatible with BRAKE011

2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

Bead diameter 3/16" - 7/32" +/- tolerance

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

2400-501

Linear Retaining Ring

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

Used on the BL229 gate op.

SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

ADAPTER008

Manaras XPL-P16 Thread Bushing

SB257B2

NICE Filter Board w/T3.15A Fuse

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details