Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.218-3-144-RH

Torsion Spring Mini Storage .218 x 3" x 12ft Right Hand

2376.206.35.930

Whiting Torsion assembly .206 wire size 35" spring length 93" shaft

R4257

Linear Power Supply

For SW100 and SL100 gate operators

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

MT-2B

Linear 2-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

LEVER051

Manaras Brake Lever MGH C-1 Galvanized

LB412-12

Laminated Bumper Standard Black 12" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

SPR41B36X1.5

Sprocket 41B36 1.5" Bore 3/8"x3/16" keyway

TRACK-SET-2"LH

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion

VBELT_4L290

VBelt 1/2" x 29" (4L290)

V-Belt not cogged

JY-10

Devanco Solvent & Degreaser 400g

General purpose solvent and degreaser
Contains natural citrus oils. Cleans oily greasy and dirty surfaces.
Dries quickly and leaves no residue.
Approved by CFIA.

Safety data sheet Fiche de données de sécurité

.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

ALUM-571

Aluminum 24" x 100' Spool Brownstone / Beige Antique # 571

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 571
Reverse side is #431 Bright White

Colour chart

5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

R5221

Sheave Strap 4"

Sheave strap also known as fork only

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

ALUM-508

Aluminum 24" x 100' Spool Sandalwood / Sable # 508

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 508
Reverse side is #431 Bright White

Colour chart

PEDALU72

Aluminum Pedestal Post 72"

Pedestal post with hood
High quality aluminum
72 inches
Dual face-plate allows for easy wire connections

Shop drawing

BEA-10-FALCON

BEA Falcon Motion Detector Mount over 11'5"

Motion sensor with microwave activationsolution for industrial indoor and outdoor use.
Ideal for automatic industrial doors vehicle gates and detection and loading docks.
Sensor also has the ability to differentiate between pedstrians and vehicles
Can be set vertically from 0 to 180 degrees
Mounting height between 11.5' and 23'
12/24V AC/DC

.......more details

Installation manual Manuel d'installation Sell sheet Cut sheet

ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

Misc. code for all special order items

TL-36ML-BLUE

LOCTITE Threadlocker Blue 36ML

Medium strength
This product cures fully in 24 hours and can be dissembled with hand tools.
This product is an anaerobic adhesive applied by drops to the threads of fasteners. It then cures to a hard thermoset plastic that locks the threads together.
For metal to metal applications only

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

PRO-LH-5011R-RH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Right Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

PBTL-3-100

Key ONLY for PBTL-3 Z100 Sold per Key

Cut Key # Z100
Price for 1 key

PG-K-R50

Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output

Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
Dimensions: 5.1" H x 2.8" L x 1.8" W
Weight (Em): 12.2 oz. (Em)
Weight (Rx): 11.2 oz. (Rx)
Aluminum enclosure
Mounting options: Wall floor post

.......more details

Sell sheet

SLR-221

Linear Residential Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

39165R

Genie Series II Wall Console

Three-function wall console with backlit panel that is easy to locate in the dark.
Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
Same as GBWCSL2-BX

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

345

Cable Clamps Galvanized 1/8" 100/pkg

Galvanized malleable cable clip

3BXLT

Control Station Exterior Surface Mount O/C/S N4 with Lockout Non-Metallic

Double pole contacts
Stations are randomly shipped with key numbers betwwen K001-K005 unless a specific key number is specified
Comes with 2 keys
H=7" W=2-3/4" D=2-3/4"

1104-9FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 9' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

K12-8034

LiftMaster Female Rod End LH

Upper rod end for BG770 BG790
Same as part # 12-8034

TRANSF037

Manaras Transformer 240/208-24VAC 40VA

Transformer 240-208V Primary 24VAC Secondary 40VA

41D8181

LiftMaster Cover

SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

Required when ordering pre-cut torsion assemblies with cones

Q085

LiftMaster Dolly Cover HCT K09-50756

Same as K09-50756

OTBH-6233-1-CON

Manaras Trolley Operator 3/4 HP 208V 3 Ph Contactor Model

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation manual Sell sheet

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

801-300-002-00

Equinoxe Long Range Receiver 1-Door Industrial Enclosure 433 MHz Pre-2016

1000 ft range
Old generation - prior to 2016

Programming Instructions Instructions de programmation

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MOUNTSHAFT016A

Manaras Clutch & Hoist Shaft Kit for Opera-SH Nema 4/12 (OSHW)

Input / clutch shaft kit for Manaras Opera-SH N4/12

BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

Maximum cable diameter: 3/16"
Maximum door weight: 1300 lbs Zinc
Plated Steel
Sold as a pair

Installation manual

PMR10RGT

Carlo Gavazzi Retro-Reflective Sensor

PMR series sensors have a sensing range up to 32.81 feet and a fixed sensitivity.
Immune to ambient light Selectable output function.
The plastic housing is IP 67 rated and allows cable or screw terminal connections.
Optional timing features include: Delay on operate delay on release or one shot (triggered on leading or trailing edge).
24-240 VAC or 12~240 VDC
5 Wire

.......more details

K75-12870

LiftMaster Complete Door Arm Kit for Trolley Operators

Kit includes: Curved Arm Straight Arm Door Bracket and Hardware
For All LiftMaster Trolley Operators except HCT and APT

KPX-100

EMX Access Control Keypad

Stainless steel face with metal backlit keys
Anodized and powder coated steel outer housing that is vandal and weather resistant to IP66 (all weather)
Dual relay outputs
Over 100 Million 4-8 digit codes
12-24V AC/DC operation
100 user codes on Relay 1; 10 users relay 2

.......more details

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

2594

Whiting Bearing Retainer

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

71-MLSBC

LiftMaster Single Button Control Mod. Field Kit Mod. Logic

Field service mod. for adding single button feature to medium duty logic operators

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

French description: Ensemble ressort 06/04
For model BL27 gate operator

28020020-500

Cable Stainless 5/16" 1x19 500' Inox ** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

TAOS141W

Stainless Hinge Tek Screw 1/4" x 1" Self-Driller with Washer

Priced per each

2B735

LiftMaster Main Board EL25 (041B0735)

Same as 041B0735

CHI-SPECIAL

C.H.I. Special Order Door

Special order as per customer's requirements

PULLEY007

Manaras Clutch Pulley 8" x 1" bore

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

19-5116

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door

For 3/4 & 1 HP trolley operators

21-7115-1

LiftMaster Transformer 115/230V 1Ph

745266

Strobe Low Profile Amber LED Warning Light 12-24VDC

Fully encapsulated electronic circuitry ensures a lifetime of trouble-free operation.
Installer can select the flash pattern of each high intensity strobe by wiring the unit according to the flash rate preferred.
4 7/8" X 5 7/8" Rubber base Surface mount 12-24VDC

19-48047MN

LiftMaster Roller Chain #48 x 47 Nickel Plated

#48 x 47 pitch with master link

37030A

Genie Motor Assembly DC

Works with Genie ReliaG 800 2022 2024 and 2042
Replacement powerhead motor assembly

MGS20-B-2U-06

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 6ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

HBS3U

Stainless Steel Bottom Fixture 3" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 3" Doors
Fits 2" or 3" Track
Single End Stile
Pins and Cotters

.......more details

IRB-MON

EMX Industries Nema 4 Through-Beam Photocells with Gold Hoods New UL325-2018 *** No Longer Available

Type B1 non-contact sensor
UL325-2018 compliant
Lens-less design
Simple 2-wire connection
Relay contacts available
NEMA 4X enclosure

.......more details

Installation Manual Sell Sheet

104255

Allstar Clip only for 8833TC

Clip only

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

ST-ENDCAP

Soft Touch End Caps Sold Individually

VBELT_5L340

VBelt 5L 34"

Fits Lynx HDC operator

RA-AD-WWS-MULTI

Lynx Wireless Wall Station AD455 372 MHz

Wireless for easy installation anywhere
Controls door open-close light on-off
Programmable pet opening (Opens to a pre-selected height of 6"-30")
Vacation Slide-Lock: Disables remote transmitters keyless entries and wall stations.
10-second closing safety delay
Transmitter program button

.......more details

Programming Instructions Compatibility chart

RA-AD-T3

Lynx 3-btn Transmitter AD455 372 MHz

UL325
Works on the new Lynx operators
For 3 doors

Programming Instructions Compatibility chart

CP-LX740

Lynx 3-btn Transmitter 372 MHz for Commercial Op. with UL325 Board

UL325
Works on the new Lynx commercial operators
For 3 doors
Not compatible with the new 372HMz residential operators

Compatibility chart

DF104.2

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

Standard features include: 2-cable balancer with independent springs
Balancer springs treated with rust preventative
All door hardware is E-coated
Spring loaded lock catch
Heavy-duty 2" 13-gauge track
Stainless steel aircraft cables

.......more details

MT-1B

Linear 1-btn MegaCode Block Coded Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Operate LED
Visor clip included
Sold in lots of 10
Power: 9-volt battery

.......more details

MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

PRO-GH-10011-U

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

K72-33841

LiftMaster Shaft-Sprocket Assembly Clutch MH

Kit includes: Compression spring Cotter pins and Bearing

H101L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 115/230 VAC Logic 5 Left Hand W/Brake ***No Longer Available

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

PRO-APT-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection