Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

773

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2-1/2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
7001-10-W/B

Commercial Side & Top Weather-Strip 10' Long - White/Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
798

Fasteners Cotter Pin 3/32" x 1" 100/Bag

MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

K204C0211

LiftMaster Torroid Transformer

  • Transformer replacement kit for use with various LiftMaster® Commercial Slide and Swing Gate Operators
109099

LiftMaster Flat Wall Plate Mounting Bracket

  • Heavy 1/4" steel plate bracket used for wall mounting of side-mount operators.
  • Slots in back allow for tensioning of drive chain.
  • Mouting studs match up with mounting holes of LiftMaster Models DJ DH J MGJ H and GH operators.
OTBH-6113-1-ECB

Manaras Trolley Operator 3/4HP 120V 1Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
97798

Marantec 2 Piece Logic Board with Terminal Strip for EOS Models

  • For use on Easy Operating System (EOS) units 4500E 4700E and M50.
  • Includes the terminal strip for direct replacement of boards that had a power surge or burned out.
  • The marantec old model number was 78914 it is now 97798.
MA022

LiftMaster Arm Bolt

  • For use on Mega-Arm gate operator
  • Sold individually
  • 5/16-18 x 29" hex head
29-10338

LiftMaster Capacitor 70uf 230V 60Hz

  • For models: MJ5011 MH5011 HMJ5011 MT5011 and BMT5011
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

BT505L5

LiftMaster 1/2 HP 575V 3p Commercial Trolley Operator with a Brake Logic 5

  • Low profile trolley operator with brake installed
  • Comes with #48 roller chain
766

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/2" 1000/Box

  • Full length thread
  • Max torque = 6
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
764

Fasteners Serrated Flange Nut 5/16-18 1000/Box

RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 *** To Extent of Inventory

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
  • .......more details
SSZP19-1

Solid Shaft 1" Keyed Zinc Plated 19'-1"

SSZP8-6

Solid Shaft 1" Keyed Zinc Plated 8'-6"

MK-00002

Micanan Timer Module (2 wire)

T501L5

LiftMaster 1/2HP 115/230 Volt 1Ph Commercial Trolley Operator

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
  • .......more details
K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

  • For Logic 5 commercial operators
  • 014D1279E
  • New part number K001D8397
751

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 1" (#2PT) 1000/Box

  • 7/16" Head
  • Indented hex washer head
  • Max RPM = 2000
CH505L5-RH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 575 VAC 3 Ph Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
RS1039-C

Roller 3" Steel 9" stem 10 ball Torque Force

  • Steel Roller Wheel diameter: 3"
  • Working length: 8.5"
  • Overall length: 9.64"
  • Box qty: 75
H751L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by the RBH751-RH

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
17-6014

LiftMaster Motor Pulley 5L 5/8" ID x 2" OD

  • Fits model H operator with Logic 5
  • 5/8" ID x 2" OD
K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

  • 230/460V PRIMARY 24V SECONDARY 20VA
K72-12515-1

LiftMaster Limit Switch Kit

  • For models T H Logic 5 and various L3 L4 commercial operators
  • Also known as: K75-12515-1 K75-12514
178B35

LiftMaster Curved / Bent Arm Kit (41B0035B)

  • Will work with most residential garage door openers
  • Also known as: 4178B0035B 178B32 41B0035B 4178B35 178B35 012385990357 178B35B
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
41C168

LiftMaster Transformer

  • For model 8500
  • 120V / 150 VA
  • 24VDC output voltage
7001-9-SANDSTNE

Commercial Side & Top Weather-Strip 9' Long - Sandstone (D)

  • Sandstone galvanized steel with sandstone dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Also known as Taupe
  • Full case quantity only (20)
GTS-16

Garaga Top Seal Single-Fin Black 16ft ** To Extent of Inventory

  • Thermoplastic resin weatherseal co-extruded.
  • For Commercial / Residential applications
  • Screws directly to the top of door no retainer required
T014

Manaras Trolley Track 14ft for 1/2HP models up-charge *Actual length 198"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
MOFT20-M14-8

Carlo Gavazzi Photoelectric Sensor Thru-Beam Transmitter

  • Maximum sensing distance is 20 meters
  • 11-pin
  • Waterproof for harsh environment i.e. water dust steam etc.
  • To be used with amplifier series S142.
  • Supplied with 15 m of shielded cable.
  • For receiver unit order part no. MOFR-M14-8.
  • .......more details
41AC075-2

LiftMaster Circuit Board Assembly for Dual Capacitor Models 315Mhz ** To extent of inventory

  • Assembly includes: End panel Logic board and Light socket
  • For chain drive units with two lights ie..3575 3585 3595 PD752D and PD758D
  • Also known as 41AB075-2 41AC075-2 041AC075-2A
CONSD24V

Reversing Contactor Struthers Dunn 24V

  • Struthers-Dunn # A275KXX90
02-410B

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button and BEST Cylinder

  • Outdoor Surface Mount Nema 4/12 station
  • Standard key cylinder is replaced with BEST cylinder
  • Open/Close spring return to center (off)
  • Key removable in center position only
  • With Stop button
110995

Allstar Classic 3-Btn Transmitter 318 MHz

  • Open/Close remote for 1 door
  • Quick code platform
  • Compatible with both MVP and traditional Allstar receivers
  • Replacement for 9921T 9931T 8822T 8832T 8833T 9921MT 9931MT 9921TK 9931TK 8832TK and 9931TK6
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
MV-00026

Micanan 24V Commercial Receiver CR32-24V

27-20112

Truck Door W-Style Spring Assembly Curbside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
G90-503000

LiftMaster Non-Resettable Counter 24VAC (50-12862)

  • Increases one number each time current is applied
  • Connects to the 24 volts of contactor coil
  • Simple 2-wire connection
  • Same as 50-12862
8FT-CHAIN-LDO

Linear 8ft Chain Rail for LD050/LS050/LDCO (HCT8C)

  • 8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits
7FT-BELT-LDO

Linear 7ft Belt Drive Rail for LD050/LS050/LDCO (HBT7C)

  • 7ft belt-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
  • Fully-assembled & pre-tensioned
  • Compatible with Model CHCR-7/8 carriage house I-rail conversion kit
DF084.1

Whiting Dry Freight Door 3/4" with Track Balancer and Standard Hardware

  • Standard features include: 2-cable balancer with independent springs
  • Balancer springs treated with rust preventative
  • All door hardware is E-coated
  • Spring loaded lock catch
  • Heavy-duty 2" 13-gauge track
  • Stainless steel aircraft cables
  • .......more details
BK000-B

Residential Top Roller Bracket Adjustable 2-Bolt Sold per Piece

  • Sold per piece - not sold as a pair
  • Meant for 2" hardware
13-3510*

LiftMaster Chain Guide ***NLA

  • This is NLA as a part by itself but may be purchased in a kit K75-18493
08-11013

LiftMaster Bevel Gear 3/4" ID

  • Fits the LiftMaster GH operator
SOLID_SHAFT_7FT

Solid Shaft 1" Keyed 7 ft Galvanized

  • Actual length is approx. 7'-1"
WKP250LM3

LiftMaster Wireless Keypad 250-Code ** Replaced by KPW250

  • Wireless access control keypad
  • 250 code capacity - 4-digit codes
  • Wireless control of up to 4 doors or gates with additional GCUs
  • Post or surface mount standard
  • 900MHz
  • Compatible with GCU and LiftMaster® 315MHz rolling code receivers
  • .......more details
MK-00493

Reversing Contactor Telemecanique 24V Coil (MK-01179)

  • Same as MK-01179
1013-1-1/4-9'

Rigid Vinyl Bottom Retainer L-Shaped. 9' Long

  • For door thickness: 1-1/4"
41C3196

LiftMaster Antenna for Co-Axial Receiver

  • Wire antenna kit same as what is supplied in a 312 / 412 HMC
CPS-3

LiftMaster Option Card with CPS-L Eyes

  • For applications requiring two sets of photoeyes ( CPS-III)
ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
  • .......more details
41A7756

LiftMaster End Panel with Light Socket for 8557

MU00001

Micanan Swivel Pulley

  • For models PRO-H / HB
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_532SS-500

Cable 5/32" 7x19 Stainless Steel 500ft

27-20004

Truck Door Dual-Spring Shaft 93" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
  • Cross Reference: W #2528
GREASE

Gear and Rail Grease 3/4 oz Tube *** No Longer Available

  • A low temperature lithium based grease
  • To avoid tooth wear premature failure and temperature rise caused by friction by promoting sliding between teeth
.218-2-L

Cut-to-Length Torsion Spring .218 x 2" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
109020

Linear 1-Channel Multi-Code Receiver 300 MHz

  • Three tabs for universal mounting
  • One "NO" relay
  • Compatible with 10 dip- swith 300 MHz Multi-code transmitters
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • .......more details
387LMC

LiftMaster Universal Wireless Keyless Entry

  • Universal Keyless Entry works with garage doors made by LiftMaster Genie Stanley Overhead Door Wayne-Dalton Craftsman Chamberlain and Linear/Moor-o-Matic.
  • Single manufacturer/single frequency design – you pick the manufacturer and frequency for the garage door you want to open
  • Wireless – powered by one 9V battery (included)
  • Weatherproof slide-up protective cover
  • Open or close the garage door without using a remote
  • Backlit keypad
  • .......more details
ER100

Carlo Gavazzi Reflector 4" (100mm) Square

  • High quality reflector for retro-reflective photoelectric switches
  • Dimensions: 100 mm x 100 mm 9.2 mm thick
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
41D794

LiftMaster Replacement Motor with Positioning Sensor

  • Electric motor for model 3850
K001A6424

LiftMaster Circuit Board Assembly Kit 2010 and later 315 MHz

  • UL325 Replacement circuit board for Medium-Duty Logic Commercial Operators
  • Used on models MJ MH MHS MT BMT and MGJ (UL325 compliant operators)
  • 315 MHz intergral radio receiver accepts 20 Sec+ remotes or unlimited dip switch
7FT-RAIL-BELT

LiftMaster 7' belt drive rail 2777BD - colour code: Grey

  • Price reflects cost if purchased with an opener
535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

  • Over 100 billion possible codes makes it impossible to duplicate the frequency
  • Jumper option for momentary or constant relay contact
  • Specifically for use with most 3-wire systems without a transformer
  • Accepts up tp 8 Security+ remote control codes and one keyless entry
  • Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
  • Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required
  • .......more details
.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.393_5-1/4"-LH

Torsion Spring .393 x 5-1/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_3-3/4"-LH

Torsion Spring .331 x 3-3/4" x 12ft LH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
972LMC*

LiftMaster 2-btn Security+ Transmitter 390 MHz ***Discontinued

  • Both buttons feature Security+ rolling code technology
  • Compatible with models manufactured from 2005
  • Second button can learn other shared Liftmaster radio-controlled devices.
  • Includes visor clip and Lithium battery CR2032
823LM

LiftMaster Remote Light Switch Sec+ 2.0 ** To Extent of Inventory

  • Controls lights remotely
  • Turn on lights in your garage yard or home with your garage door opener remote control
  • Use with LiftMaster Internet Gateway to control lights from smartphone or computer
  • Compatible only with Security+2.0 garage door openers and accessories enabled by MyQ technology
380LMC

LiftMaster Remote Work Light

  • For use exclusively with the LiftMaster Wall Mount Garage Door Opener (model 8500)
  • Provides 200 watts of light with adjustable light time delay
  • Lights are controlled by opener activation or control panel light button
  • Add as many lights as you wish – perfect for brightening up a dark garage or workspace
71-B120H

LiftMaster Interior Brake Kit with Cable 115V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
  • Works on mechanical operators as well as logic 2 3 4 and early logic 5 motors.
41A6095

LiftMaster Electric Motor and Bracket for 3800 / 8500

  • For models: 3800 3800P & 3800PLD
  • Also known as 002D1622
29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

  • C & D relay 3-phase only
41AC050-1M

LiftMaster Electronic Circuit Board Assembly

  • Assembly includes: circuit board end panel and light socket
  • For chain drive units with one light
  • Fits 3245 & 3255
  • Also known as 41AC050-1 041AC050-1M
41A4916

Gel Wire Connectors 19 to 26 AWG 100/ box

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
41A3489

LiftMaster Complete Trolley Assembly for chain drive

  • For chain drive models 1984 +
  • Compatible with Sears Chamberlain
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.273_2-5/8"-RH

Torsion Spring .273 x 2-5/8" x 12ft RH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
19-50ML

Master Link #50

  • For #50 chain
  • ANSI Standard Carbon Steel
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
CP-SW-AT

Lynx Single Limit Switch

RA-LPL-KEYPAD

Lynx Wireless Proline Keyless Entry 303 MHz

  • Illuminated keypad
  • Weather shutter protects keypad from elements
  • 1 to 6 digit codes for maximum security
  • Allows for access without remote or keys
  • Compatible with Lynx residential openers built from 2000+
  • Mounting screws and 9V battery included
  • .......more details
T3B-DS

Lynx 3-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 3-buttons provides control for 3 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
  • .......more details
PL-A03-OLD-BRD

Lynx Replacement Logic Board Old Version ** This item is no longer available (NLA) **

  • Old version board works on operators with a blue cover
  • Replacement logic board for Napoleon/Lynx Proline garage door opener
  • For openers built before 2008
  • This board has a transformer (the new board does not)
CP-SW-HOIST

Lynx Interlock Switch

SEA433

Erone Tuned Antenna 433MHz

  • Increase reception and/or range
  • 11.5ft (3.5m) coaxial cable (RG 58) included
  • L-Shaped bracket for wall-mounting
SEL2641R433-Z4

Erone 4-Relay Stand Alone Receiver 433MHz

  • Up to 85 transmitter keys
  • 2 NO relay + 2 NO/NC relay (24VA)
  • Self-learning memorization
  • Standard pulse output Relay number 4 can be setup to latched output
  • Can be used for O/S/C
  • Power requirements: 12/24Vac/dc
  • .......more details
OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"