Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1005-2-14

Aluminum Bottom Retainer U-Shaped 14' Long**Actual Length 14'2"***

For door thickness 2"

G50-FL120-24

LiftMaster Flexible Red Rope Light 24VAC/DC 10ft ** Discontinued

Flex Red Light Strip for BG770 & BG790 Barrier Gate Operators
24VAC/VDC
10' Long

41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 8 foot high garage doors
T rail assemblies ONLY.

7812

Whiting Bottom Seal Truss Door White 90" Long

Fits Fed-Ex truck doors

MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

41A5658

LiftMaster Gear & Sprocket Assembly for 2595 3595

Dual sprocket assembly for 3/4 HP chain drive operators.
Kit includes: Spring and thrust washer retaining ring bearing plate (2) roll pins dual drive and worm gear helical gear (with retainer) and grease.
For use Chamberlain Liftmaster chain drive models: 2595/3595/3595S

GRC390/315-3

Heddolf Genie Compatible 390 or 315 MHz 3-btn Transmitter

390 or 315 MHz rolling code compatible 3-Button 3-Channel remote transmitter
Works with Genie and Overhead Door openers that utilize a ROLLING CODE 315 or 390 MHz
Compatible with Genie model GIC-3 GIT90-3 GIT-3 GIT-3BL G2T-3 G2T-3BL GICT390-3BL ACSGT ACSCTG Type 1 ACSGT Type 1 TBSTG Type 1 Series II Electronics Compatible Remote and B8QACSC

4007-14FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
die # A-25060

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

DC motors

34030308

Polyester Lifting Sling Type 3 Eye / Eye 3" x 8'

2-ply
Minimum tensile strength of 9800 lbs per inch of width

MB-03204

Micanan Electric Motor Only 1 HP 575V 3PH C-Flange TEFC 56C

Fits GT GH GHC & GSD

SL332COP

Copper Sleeve 3/32" 100 Sleeves per Pkg ** Price on request

Oval sleeves ONLY
Stops sold separately part # ST332COP

HDC-123-208-C-R

Lynx Ind. Jackshaft with Hoist 1 Hp 208V 3ph Contactor Right Hand

1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
Solid state circuit board Lynx-6000. Built in 1.5 second delay.
5L V-belt primary reduction #50 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Precision pillow block bearings on output shaft.
Fully driven adjustable limit switches.

.......more details

CABLE_532SS5000

Cable 5/32" 7x19 5000' Stainless Steel ** Price on request

92-00005

Truck Door Hex Nut 5/16"-18

Cross ref: W #10.1033.2 for both #2376 & #7176 balancers

JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

Brushless DC high reliability high efficiency and low maintenance motor
No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
Soft start soft stop
Includes cycle counter timer-to-close 10ft motor wire harness
Battery backup optional (sold separately)

Sell sheet Technical document

41C4842

LiftMaster Universal Replacement Motor and Bracket Assembly

Same as 41A4842
Replacement for 3280 1/2 hp motor

6X18PO50

Devanco Loop 6' x 18' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

Reinforcement bar 3"

MG020-B-2E-05

Miller Edge Sensing Edge Black 2-Wire End Outlet 5ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

GD-STEND-24D

End Cap Steel 18G 24" Double 1-3/4"

SP20W12V

LiftMaster Solar Panel Kit 12V 20 Watt

Includes mounting bracket and hardware with 10' cable

Installation guide Guide d'installation

3011-1-25

Aluminum Flat Slat Adapter 25 ft

41A7920-2

LiftMaster Hardware Kit

K001A5859

LiftMaster Elite Dual Motor Circuit Board Q171 ** NLA

Old style fits SL3000 CSW 200 with Q019 boards only
This board has been discontinued and no replacement available

R5220

Sheave Strap 3"

Sheave strap also known as fork only
Same as part number 302

R5221

Sheave Strap 4"

Sheave strap also known as fork only

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

790919

FAAC Control Board 115V for 455D

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

226-9313

Lithium AA 3.6V Battery

Used in various types of photo eyes

PG-K-R50

Prime Guard Monitored Thru-Beam Photoeye Kit 50 ft Range Relay Output

Prime Guard's rugged housing is suitable for both indoor and outdoor installations.
Dimensions: 5.1" H x 2.8" L x 1.8" W
Weight (Em): 12.2 oz. (Em)
Weight (Rx): 11.2 oz. (Rx)
Aluminum enclosure
Mounting options: Wall floor post

.......more details

Sell sheet

2650-112-05

Linear Cold Weather Package 230V SLC gate Op. Only

Cold weather package includes: Arctic oil Heater Cogged V-belt

TILT-5

Tilt Detector

State of the art technology senses as little as a 5 degree tilt in the motion of electrically operated doors and will automatically stop the motor
Safeguards against rolling steel door failure where conventional devices miss
Automatically stops the operator to keep door within safe parameters

Sell sheet

2650-112-06

Linear Cold Weather Package 230V SLR gate Op. Only

Cold weather package includes: Arctic oil Heater Cogged V-belt

CP-ARM-NEW

Lynx Auto Re-Connect Carriage Arms Only New Style 14-1/2"

Arms only for CP-CRG-NEW

LVB1020-11

Laminated Bumper Black 10" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

Bars are sold separately.
Hardware bag for doors 12' and under

Assembly Manual

37314

Doorlec Relay Mini 120V

For overrun pre-wired 25 Amp

K72-13057

LiftMaster Clutch Shaft Kit APT

Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.

1104-8FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 8' Long - Light Bronze (F)

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

510.7302.07

Whiting Stainless Steel Interior Hdwr Pkg DEH Steel 7-Panel Door Up-grade Option

Double end hinge option

41D8181

LiftMaster Cover

41D7570

LiftMaster Light Lens (41D7572)

Also known as 041D7572 41D7571 41D7570 41D7572 041D7571 041D7570 041-0144

744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

8 x 3/4 Pan Socket Tek Zinc

.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

Spring wire only. Cones and Filler extra

.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

Spring wire only. Cones and Filler extra

PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

E/BLOP/128

Double Channel Loop Detector- factory installed on logic

SA1906/031

AS1320 Logic with Top Cover Assembly BL3X SAV

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-7FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 7' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

053158

Rotating Beacon 4" Amber 12-110V DC

IP Protection: IP56
-30 degree celsius to + 50 degree celsius extreme temperature reliability
small format only 2.5" wide

PPLV1

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Block coded

.......more details

Programming instructions Instructions de programmation Sell sheet Brochure

28-03090

Truck Door 1" Vert. Track and Right Angle Assbly Curbside (RH) 96.5" Todco Style**To extent of inventory

For Todco style doors
Galvanized steel 14-gauge construction
Includes right angle frame 1" track and operator bracket
Fits doors 72" - 90" high

28-00290

Truck Door 1" Std Vert. Track and Angle Assbly Roadside (LH) 96.5" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
For door opening less than 90" high
Fits door sizes 72 - 90" high
Cross ref: T #49014-2 T #41034-2 & W #4045

.......more details

COUPLING019

Manaras Manual Hoist Coupling

For Opera-SH

POCKETWHEEL005

Manaras Pocketwheel Opera

POCKETWHEEL007

Manaras Pocketwheel Assembly with rollers and clips (Hoist-A-Matic)

Includes POCKETWHEEL005 CAM012 and CLIP020

54-440

Limit Switch Snap Action Standard Short Hinge Roller Lever S54

SPDT

ACT-34D

Linear 4-Channel Block Coded MegaCode Key Ring Trans Prox Transmitter 318 MHz

Compatible with all Linear access receivers and controllers
Built-in 26-bit Wiegand proximity tag
Eliminates need for separate proximity card or tags and transmitter
Supplied with quick-disconnect key ring
Same facility and ID codes for transmitter and proximity tag
Sold in lots of 10

.......more details

2B639

LiftMaster Speaker for EL25 (41B0639)

1B0639

27-20003

Truck Door Dual-Spring Shaft 87" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes drilled in one end only for cotter pins the other end is not drilled for flexibility
Cross Reference: W #2528

PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

Surface mount
Metal enclosure
Dimensions: 7" H x 2-3/4" W x 3-1/2" D

Sell sheet

27-24402

Truck Door Dual Torsion Spring Assembly 87/35 for Whiting Roll-Up Doors

Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
Springs are treated with rust preventative
Roadside cable drum is color coded RED
Specs: Shaft Length: 87" Spring Length: 35" Wire diameter: .187 -
Winding cone color: White

12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

Fits model LJ / LJH

16094

Whiting Premium Plate Bottom Channel 96"

With end hole removed - replacement for serial # 165462

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

36451A

Genie Front Idler Assembly 36451A.S *** NLA

Works on ReliaG 800 2022 2024 2042 ReliaG 600 ChainLift BeltLift 1022 1024 and 1042 Series Units

WASHER008

Manaras Type A Plain Washer 5/16" Zinc Plated

Used on old MJH

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

Used on old MJH

CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

6X16SC50

Devanco Loop 6' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection