Devanco Canada - Get The Right Garage Door Opener‎ and Parts

15-41B32LGH

Sprocket 32 Teeth 1" Bore 1/4" Keyway

Sprocket for #41 chain

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

MOUNTSHAFT001A

Manaras Clutch Shaft Kit for MJH

Input / clutch shaft kit for MJH built after 1999

Drawing

BRAKE011

Manaras Band Brake Assembly Kit

Does not include solenoid
Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
Will not work with Gear-Head operators

Installation Manual

SPREADER001

Chain Tensioner for 1" shafts

Chain spreader for installation with 1" operator shaft & 1" door shaft.
Includes 2 shaft collars and set screws.
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing

Installation instructions

RADIO-EM103SD

Manaras 3-btn transmitter configured as O/C/S 1 door Rolling Code 390 MHz

Open/Close/Stop remote for 1 door
Operates single door: O/C/S configuration
LED indicator CR2032 battery and visor clip included
Field Selectable: Jumper inside the remote can be positioned to Single Door (SD) or Multiple Door (MD)
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

RADIO-27

Manaras MT-1000 1-btn transmitter 313 MHz ** Replaced by RADIO-EM901 or RADIO-EM903

Open/Close remote for 1 door
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
Alternate part number: MN-100TI-A

Programming Instructions

DRQP

Linear 1-Channel Delta3 Gate Receiver 310 MHz ** Available to extent of inventory

1-Channel Gate Receiver
High-sensitivity short-range radio receiver
Operates in conjunction with the 9-inch local antenna (supplied).
Designed for use with automatic gate operators or systems where a remote antenna is needed.
Same as: DNR00013P

Installation Manual

DR4

Linear 4-Channel Delta3 Receiver 310 MHz

Activates four devices or UP DOWN STOP for one commercial device
310 MHz 8 dip switch
Power: 24 VAC/VDC
Dimensions: 4.9" W x 4.2" H x 1.3" D
Same as DNR00023A or DR4V

Programming Instructions

4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

2" Offset
For use with Light Brush or Vinyl Insert

1003-5"-YELLOW

Bottom U-Rubber 5" Yellow 150' Long

5" yellow vinyl insert 150ft spool.

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

25-10501

Truck Door Max Strength Steel Lock (only) for Todco Roll-Up Doors

Superior strength heavy-duty cast grade 30 steel Zinc plated finish
Pins are mechanically fastened in place for optimum strength
Extra thick padlock provision designed for greater security
Trapped handle cannot pull out to bypass keeper resulting in tamper-proof lock
Spring assisted lock eliminates door bounce
Cross Reference: T #69571 280000

.......more details

25-10101

Truck Door 2" Nylon Roller 3" Shaft for Whiting Roll-up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #3228 T #61424 T #70225
Box quantity: 25

EP2987

Exhaust Port 6" with latch long barrel

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

OPH-6112-CONT-R

Manaras Opera-H 1/2HP 120V 1Ph with Mechanical Contactor Right Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

CRBH751L5-RH

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

78LMC

LiftMaster Wall Control Panel

Wired multi-function control panel
Push-button is illuminated for convenience
Includes an adjustable light timer
For use with opener built January 1995+
Has a lock feature to cancel all radio control signals
Also known as: 945CB 41A6318 041A5273‑2 012381463183 41A5273‑14 041A6318

.......more details

Installation Manual Manuel d'Installation

R-831-P

FL-Allstar 1-Door O/C/S Receiver 107480-311 MHz***NLA

This receiver comes in a metal enclosure.
It has three isolated contacts to open close or stop the door. If your operator can be controlled by three button station then our R-831-P receiver and commercial remote controls will work with your operator.
Manufacturer's model number: 190-107480
Dimensions: 9 1/4" x 6 7/8" x 1 1/4".

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings
NEMA 7/9 O/C/S push-button station included

PRO-GH-10023U-R

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Right Hand

Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
External radio control terminal strip
Three button O/C/S control station Nema-1
Supplied with Nema-1 photocells
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

31369-114

Doorlec Sprocket 60B12 1-1/4" Bore

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

MP00107

Micanan Mechanical Load Sensing Mod Left hand

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

41176R

Genie Shaft Assembly Kit 6070/6170

41184R

Genie Transformer

Works with Overhead Door Infinity 2000 9020 & 9120
Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
Same as: 41184 41184R 41184R.S

EXT-HDWR-BOX-7/8

Installation Box for Extension Springs for 7' & 8' Doors

Installation Hardware includes 3" sheaves sheave strap cables safety cable fasteners

200R

Chain Hoist Wall Mount 3:1 200R-41B36-1" Torque Force (244687)

Ratio 3:1
Sprocket: 41B36 Bore: 1"
Includes: 26ft of hand chain 1/4" square key chain keeper and 3.6ft of #41 roller chain included with sprocket wheels.
Pull load hand chain: 35 lb max

K093A0763

LiftMaster Rear Housing KPW5 KPW250

This is a replacement Rear Housing KPW5 KPW250.
For use with various LiftMaster® Wireless Keypad Entry Systems

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

PHOTO-060

Manaras Non-Monitored Photoelectric Cells N4/12 & IP67 Retro-Reflective 39' Range incl 3" Reflector

Retro-Reflective photo cell

422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

BTM-VB-3.25

Devanco Bottom Vinyl U-Rubber 3.25" Black 250' spool

250ft spool of vinyl insert for sectional doors
low temp vinyl
perforations in the bottom to ensure that condensation escapes
Fits most standard bottom retainers

P-831RE

Pulsar 1-Door O/C/S Receiver 318 MHZ P-110554

Allstar compatible
Economy housing receiver
OPEN-CLOSE-STOP
24V AC/DC
8 dipswitches 318 MHz

Wiring-diagram

VBELT_4L270

VBelt 1/2" x 27" (4L270)

V-Belt not cogged

1016-ADHSVE-CAULK

Adhesive for Storm Shield Caulk Tubes 10.3oz

For use with 1016

RN0037-SS

Roller 3" Black Nylon 7" Stainless Steel Stem Precision Sealed Bearing 6203

A supreme precision sealed bearing roller that never requires lubrication
Ideal for high usage and high moisture areas ie..carwash
7/16" stainless steel shaft.
100 lb load 100000 cycles of a 12' door
Stem Length - 6.69" which does not include the shoulder Overall Length - 7.97"

GAREX-PAINT-BRN

Garex Touch-Up Paint Commercial Brown

202-0022

TNR Composite Bottom Bar Arm for HDXL

HAE00072

Linear WiFi Wall Station

This Wi-Fi wall station allows direct operation of the door operator and light using the buttons.
When connected to your local wireless access point you can check status get notifications open or close the door and manage user access from any location via the Linear Android or iOS app.
Requirements: To use with the app you will need:
a Wi-Fi network with internet connectivity
a strong Wi-Fi signal in the garage where you are installing the wall station
an Android or iOS smartphone or tablet

.......more details

TNR-HDXL-CUSTOM

TNR Doors Extra Large Rubber Door Price by Quote Only Made to Order

Suitable for applications up to 55 feet wide and 35 feet high
Self-supporting channel steel C10 & flatbar mounting assembly
Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
Frame mounted thru-beam photoelectric sensor
High-Efficiency Heligear Head (HG) Operator with multi-function PLC panel
Door speed of up to 12 inches per second

.......more details

RS-40

Roller Shutter Aluminum Model 40 Made to Order Pricing by Quote Only

The RS-40 is designed for use in window roller shutters door recesses and small shopfronts.
These profiles are of better technical performance and are thus more stable.
At the same time good coil diameters allow to use this profile in small-size boxes.
The foam filling ensures good heat and acoustic insulation.
Its low weight allows the use of manual drives spring- or electric control devices.
The RS-40 profile is available with or without perforation in a wide range of RAL-like colours.

.......more details

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

DEV-RSFD-7500

Devanco Rolling Steel Fire Shutter 7500 UL Rated **Made to Order

Model 7500 shutters can be up to 13 feet and 6 inches wide and 12 feet tall with UL labels Class A B or C while still being able to function as normal counter rolling shutters.
Oversized fire shutters can be manufactured up to 20 feet wide.
Along with UL labels that will automatically close the fire shutters for either 3 1½ or ¾ hours the fire shutters can also be manufactured with smoke protection.
Pricing varies according to size and options selected.
This is a Made to Order item

DEV-RSSD-3000

Devanco Rolling Steel Service Door 3000 20GA Non Insulated Galvanized Slats **Made to Order

Model 3000 roll up door is complete with a curtain hood guides counterbalance and option for operation such as chain hoist manual lift electric operator.
Pricing varies according to size and options selected.

O02R9502

AirLift Rebuild Kit Orig. Op. w/Brass Nut

33103

Overload 1.40 to 2.30A

Setting range 1.8-2.5A

RADIO-EM104

Manaras 4-btn 4-door Rolling Code transmitter SBC or O/C Function 390 MHz

2 operating sequences available: open/close or single button control (SBC).
Single button control (SBC) allows the user the possibility to open stop or close the door by using the one button.
Comes with LED indicator CR2032 battery and visor clip.
Compatible with Manaras operators manufactured after August 2013 with control board070E & board070M.

BCSI-PM31

Pivin Drapeau Disconnect Lever BCSI ** Price by Quote Only

For industrial slide gate operator

INTERFACE003

Manaras Y-Connect Signal Merging Module

N4 compatible with 2 x monitored entrapment protection devices
Compatible primary devices: PHOTO061/061A/065/070
Secondary devices: monitored photocells light curtains electric sensing edges and/or non-contact sensing edges

STD-SS-MINI

Janus Mini Storage Latch Stainless Steel

Standard Stainless Steel latch

89493

Marantec RPM Sensor with Wire Harness

For use on M-line/Q-line/EOS models

041D8227

LiftMaster Wiring Harness

For use with various LiftMaster® Chain Drive Garage Door Openers.

H4NA12

Richards-Wilcox Hinge 4NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
Ideal for pre-2010 installations not requiring a monitored solution.
Ability to span up to 32' wide
Universal mounting brackets included
IP67 waterproof housing

.......more details

Installation manual sell sheet

210135

Skylink Chain for 7ft Door

Replacement chain for chain rail

MOD065B

Manaras Trolley Hoist #41 Brake Release Kit Includes 12' Shaft

Chain hoist for manual hand operation of standard lift doors equipped with trolley operators.
The 1" cross-header shaft (12' long) drives the front idler of the drawbar
For use with operators with #41 chain
When applicable it incorporates an electric cut-out and brake release cable
Hand chain for 14' high door is standard
Hoist assembly width is only 8.5"

.......more details

108207

Fasteners Self Drill & Tap Tek Screw 5/16-12 x 1" 100/Bag

Indented Hex Washer Head
7/16" Head
Max RPM = 2000

PORT-ROYAL-R16

Garex Ready to Install Door Special Order

R16 Insulation - Overlay moldings positioned to create the Port Royal design - Moldings are factory white or can be factory painted to match door colour - Optional decorative hardware is available - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

D800-120-125

Cable Drum High Lift 800-120 1-1/4" HL Pair

Adjustable cable attachment with screw
Made of aluminum
High Lift capacity: 120" max
Flat capacity: 266" max
Rating: 2200 lb per door max
Keyway: 1 KW of 1/4" width

.......more details

106141

Marantec Shaft Adapter

Z9003-QUIET

Pusher Spring - 27" w/Sleeve 3" Tip Sold as a Pair

Quiet pusher spring 27" long with a large 3" tip and PVC sleeve over tube
11lbs of initial pushing strength per spring+ 3lbs per inch per spring
Sold as a pair. Pair includes 1 LH 226841 and 1 RH 226842

K20-3075M-5-H25

LiftMaster Electric Motor 3/4 HP 575V 3P L5

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5
This is a replacement Motor Kit (3/4 HP 575V 3PH L5). For use with various LiftMaster® Logic 5.0 Commercial Door Operators.
Will also work on L3 L4 operators

17350

Doorlec Cable 5ft with Antenna

CPT-223-K5

Miller Edge Non-Monitored End Plug Kit

For use with the CPT-223-50 bulk extrusion
Kit includes: 5 wired 5 Non-Monitored end plugs and 5 1/8oz tube of vinyl adhesive
One kit is enough to make 5 non-monitored edges

ATSW

LiftMaster Light-Duty Dual-Rated Trolley Operator

Wi-Fi enabled – completes the LiftMaster Light-Duty product family with Wi-Fi on board
Built-in Wi-Fi enables access to myQ® or myQ Business™
Security+ 2.0®
Dual-sided lighting with light lenses provides superior illumination
Electronic limit setting for easy installation/setup
Compatible with myQ Accessories (827LM Remote LED Light 825LM Remote Light Control 823LM Remote Light Switch 829LM Door Monitor

.......more details

41D3058

LiftMaster Electric Motor and Bracket Kit

Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
Also known as: 41D3058 41A2821 41A2820 41A3058

36045A

Genie Helical Gear 2040L

Helical gear assembly for the Genie #2040L garage door opener.
Same as: 36045AS 36045. 36045A 36045S
Includes: Helical and limit gear screws clips and small tube of grease.

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

PRO-GH-10081U-L

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

For 1/2 HP Micanan trolley operator PRO-APTC

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-N4

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

14219

Doorlec Disconnect Arm LJH

.393-6-L-C

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.306-334-R-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

218758

Torque Force Spring Failure Device 1-1/4" Shaft Left Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

2704.206_325

Whiting Roadside Torsion Spring 2-3/16" ID 32-1/2" Long

Torsion spring wire only
.206 wire size

K71-D1PH

LiftMaster Drum Brake Kit 1 Ph 115/230V (Late Model Logic 5 Shoe and Drum Models)

Internal Solenoid Drum Brake with Cable (120V Single Phase) Replacement Kit.
Compatible with LiftMaster® Logic 5.0 Model T SD J H and HJ Industrial-Duty Operators.
Complete service kit includes: Solenoid Cover Brake Solenoid Brake Drum Cable Mounting Plate and Installation Hardware.
Quiet preferred sound profile
Industry benchmark stopping performance with adjustability
Significantly reduced modes of failure

.......more details

Installation manual Manuel d'installation

MK-00428

Micanan Reversing Relay 24VAC Coil 3-Pole TPDT 11-Pin Flange Mount

For PRO-LTB LJ LH LHAB

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

SPRAY-562

Aluminum Touch Up Spray Paint 350g Commercial Brown / Brun Comm. #562/462

350g

ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 265
White #431 on reverse side

Colour chart

SPRAY-525

Aluminum Touch Up Spray Paint 350g Black / Noir #525

350g

PRO-APT-5023-U

Micanan 1/2HP 230V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7581-U

Micanan 3/4HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

R5212

Pulley 5" Zinc Plated Clevis Pulley with Strap ** To extent of inventory

LB1012-18

Laminated Bumper Standard Black 12" x 18" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

26CW14225-CUT

Truck Door Bottom Panel with Hardware (15" x Cut-To-Size) Painted White for Todco Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels are routed and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white
Comes with 18" pull strap assembly two bottom fixtures standard lift handle two cable anchor brackets seal and retainer.

.......more details