Devanco Canada - Get The Right Garage Door Opener‎ and Parts

HSLG-111

Linear Commercial Slide Gate Operator 1 HP 115V 1 Ph - Heater not Included

Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station
AC and DC power available for access control accessories
All accessory connections 24 VDC
Solenoid disc brake
Duplex receptacle
Built-in master/slave capability using 3-wire shielded cable
Heavy-duty steel chassis
Adjustable torque limiter
#40 roller chain and sprockets
Efficient double V-belt drive
Max gate size: 55 ft 1700 lbs
Max duty cycle: Continuous
Opening Speed: 10" per second
Optional thermostatically-controlled strip heater Sold separately

K94-36408-2

LiftMaster Reset Switch LA400 with ID Resistor

For use with LiftMaster LA400 Series swing gate operators
Includes ID resistor kit
Includes LA400 product ID

MINI-218-3-10-RH-W

Mini Storage Spring .218 x 3" x 10" RH Wagner End ***Price on Request

Special Order. Price valid on in stock springs only

2376.156.145.550

Whiting Torsion assembly .156 wire size 14-1/2" spring length 55" shaft

BEARING007

Manaras Flange Bearing ID 1"

Flange bearing for 1" shaft

BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

1-9/16" OD 5/64" Width
Replaces BEARING025

CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

10-8055

LiftMaster Counterweight Clamp for BG790

Also known as: G108055

DM54-COATED

Special ends 2023-07-31

Cable Drum High Lift 54" 5250-54 Specialty Coated Pair

54" High Lift aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH.
Maximum High Lift: 54" Maximum Door Height: 180" + High Lift
Rated lift per drum: 500 lbs
Maximum cable diameter: 3/16"

.......more details

BCT751L5CS

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator w/ Brake Carwash and Roller Bearing Mods

New Logic 5
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.

.......more details

MV00164

Nice AB 42GRL 9000-THRU-BEAM PHOTO Emitter 24V

K80-38735

LiftMaster Vent Plug Kit HCTDCU

OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

041-0180-000

LiftMaster Wiring Harness Camera/LED Pod Dual Lens

This replacement kit is compatible with the follwoing models: 84501 84602 85702 85702 87504 87802 B4603T B4603TC B6713T B6713TCH B6753T B6753TCH

2376.162_20.780

Whiting Torsion assembly .162 wire size 20" spring length 78" shaft

WHITING-RT

Whiting Reversed Track Assembly Option Dry Freight Door

This is an option when ordering a door

C12/5-BLADE

Felco Replacement Blade FC12/5 Single Blade

Single balde only for FC12 cutter

C12B

Felco C12B Cable Cutter Bench Mounted 3/8" Capacity* Special-Order Item Sold by Quote Only

** Capacity of 3/8 inch diameter or smaller on stainless steel cable.
The unique triangular jaws never leave a frayed end.
The C12B bench-mounted wire rope cutter mounts easily to your workbench and can be single hand-operated
Length: 19 inches
Weight: 3 lbs.

1104-18-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

345.000

Whiting Tongue & Groove Bottom Panel Assembly with Seal/Channel Made to Order. Price on Request

15-1/2" x 96" standard size panel.
Extra wide panels will carry an additional charge
Primer only

2807.162.220

Whiting .162 x 2-3/16 x 22" Curbside with Cones

GDI-HB330

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1" Shaft Non Monitored

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

GDI-LG940

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 Non Monitored

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

GDI-LG930

GDI Jackshaft & Trolley JDMG-LG-2030 Nema 1 Non Monitored

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

PRO-JB-7553-U

Micanan 3/4HP 575V 3P Jackshaft with Brake Mon ECB N1 Eyes Universal Mount

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake included recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

DISCONNECT008

Manaras HDW Brake Release MTBH

PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

41A5507-6

LiftMaster Receiver Logic Board for 2500B/D (390 Mhz)

With end-panel
Also known as 41A5507-6C 41A5507-3

GHW-353-2-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 2 HP 575V 3P Right Hand

With DC2000 logic board
Worm-Gear Jackshaft type Industrial operator NEMA 4/12

OSH-6532-M-RH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored No Photoeyes

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

7601351

FAAC Capacitor 8MF for 220V

80352.4200

Todco Nut Hex 1/4"-20 PLTD

2000D

Chain Hoist Direct Drive Assembly 2000 D

Sectional door Direct drive - 1" shaft
Requires keyed shaft
Includes: 2 shaft collars Chain Keeper 1/4" Square Key 2x set screws 5/16-18
Fits 5-1/4" min. offset
Includes 26' of chain

OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

P-8866TC-OCS

Pulsar 6-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 6 doors
8 dipswitches 318 MHz

Programming instructions

K11-8061

LiftMaster Main Shaft (1)

Also known as: 11-8061 118061 G118061
For use with various LiftMaster® Commercial Gate and Barrier Gate Operators

K07-8063

LiftMaster Upper Crank BG790

Also known as: 07-8063 078063 G078063

K41-0245-000

LiftMaster BLDC Power/Motor Drive Board IHSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

SF375-S

Spring Fitting 3-3/4" Stationary Side Only Long Ear 1" Bore

Universal thread for use in either LH or RH wound springs.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

BCS-PM26

Pivin Drapeau disconnect spacer BCSI Gate Operator ** Price by Quote Only

IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

Kit includes photoeye with hood reflector with hood and mounting bracket
Retroreflective configuration
UL325-2018 compliant
Six (6) monitoring interfaces
60 ft. operating range
Easy installation and set-up

.......more details

BCSI-PM11

Pivin Drapeau Clutch Bushing ** Price by Quote Only

Friction Plate

3-4734

Serco Bell Crank ** Price by Quote Only

For Serco loading docks

SMF5005K

Serco Holdown with Rack Bar ** Price by Quote Only

A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
This prevents the dock leveler ramp from being damaged.
For Serco mechanical dock levelers

P-733T

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
Wall mount
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

P-9931T

Pulsar 1-btn Transmitter 318 MHz

Allstar compatible
Single channel transmitter
8 dipswitches 318 MHz

Programming instructions

2528.084

Whiting Dual-Spring Shaft 84" for Whiting Roll-Up Doors

Constructed of 1" outside diameter heavy-duty steel tubing
Holes pre-drilled
Cross Reference: For Whiting # 2376 balancer

50304

Doorlec Hoist Shaft Kit w/Disconnect Coupler

For models LJH LJHW

K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

K41-0257-000

LiftMaster Harness Repl. Kit IHSL/ INSL24UL

Harness Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial Heavy Duty Slide and Industrial Lite Duty Slide Gate Operators

MP00224

Micanan Track and #41 Waterproof Chain for 7' h Door

For 3/4 & 1 HP Micanan trolley operators

4580-304-SLATE/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Slate Grey 458-22

304ml cartridge
Ideal for movement and perimeters joints
Meets ASTM C920 S NS Class 50 NT M GA O
Meets AAMA 802 and 805 standards
Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
Excellent resistance to UVs for indoor and outdoor use

.......more details

41C5498

LiftMaster Wiring Harness Kit Low Voltage

For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001

R1P

Erone Radium + Paradox 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

DECO-FASTNR-HNDL

Decorative Handle (Carriage-Style) Fastener 3/4" Stainless Steel Black 100/pkg

Self drilling metal screw
Stainless Steel all black

DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
Black crinkle head
Ideal for decorative (carriage style) hinges

K32-11010

LiftMaster Gear Reducer 44:1 1-1/2-2 HP

Replacement Kit. Compatible with 1HP 1/2HP & 2HP LiftMaster® GH Model Commercial Door Operators
Also known as: 32-11010 3211010

MB-01303

Micanan Electric Motor Only 3/4HP 110V 1PH 3-Wire Base Mount FR56

Base Mount motor O.D.P. FR56
Used on Micanan's T TB APT J EJ H EHJ HHD & SD

HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

100 key pack numbered 00 thru 99

2376.206.325.890

Whiting Torsion assembly .206 wire size 32-1/2" spring length 89" shaft

C-20X14-134-W-OLD

Thermal Window 20" x 14" for 1-3/4" Cedo Original White Old Style

For 1-3/4" thick door
Old style with round screw heads
Glass Dimensions: 17-3/4" x 12-11/32"
Hole Size: 18-3/4" x 13-3/8"
Exterior Frame: 19-3/4" x 14-3/8"

K41-0247-000

LiftMaster Limit System INSL24UL/IHSL24UL

Compatible with the following models: IHSL24UL INSL24UL

K41-0244-000

LiftMaster BLDC Power/Motor Drive Board INSL24UL

Replacement Brushless DC Power/Motor Drive Board Service Kit
Compatible with the following models: INSL24UL INSL24ULMC

K41-0073-000

LiftMaster HD Main Control Board

Compatible with the following models: HDSL24UL HDSL24ULMC HDSW24UL HDSW24ULMC

41181R.S

Genie Main Control Board Kit 6070H 6170HB

Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
DOES NOT include the Genie Aladdin Connect Control Board #41153R

2376.182.275.930

Whiting Torsion assembly .182 wire size 27-1/2" spring length 93" shaft ** price by quote only

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

CBC316-SMALL

Thimble 3/16" - 100 per pkg (Size Small)

12-1004

PVC Strip 8" x .080 Standard Clear Smooth for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

041-0191-000

LiftMaster Cover Light Silver

LiftMaster® "Light Silver" Replacement Cover
For use with various LiftMaster® Belt Drive Garage Door Openers featuring myQ® technology and Bluetooth® capability; manufactured after 2021 only
This replacement part is compatible with the following models: 84501 84501-267 84602

041-0192-000

LiftMaster Control Door Panel

Control Door Panel Replacement Kit
For use with various LiftMaster® Garage Door Openers featuring myQ® technology and Secure View™ Video Camera; manufactured after 2021 only

2705.156_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Roadside order part # 2704.156*180

2704.156_180

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .156 x 2-3/16" x 18" Long
For Curbside order part # 2705.156*180

CA-107-412

Continuous Angle 1-1/2" x 4-1/2" x 107" L Sold per Piece

1-0241

RW Stay Roller 66 Black/Grey 2" Dia

Special order item
For use inside doors and can be fastened to concrete with expansion bolts.
Steel frame with a black enamel finish and a grey iron wheel.
2-inch diameter roller

HAE00077

Linear LDCO Control Board BBU Compatible

DC motors
Replaces HAE00061

BCSI-PM203

Pivin Drapeau Chain/Spring Tensioner BCSI Gate Operator ** Price by Quote Only

OSH-6534-ECB-LH

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

69987.3072

Todco Original Bottom Seal Reefer Cut to Size ** Special Order Item Price by Quote Only

Fits Serial #30662431-1

39902R

Genie Wireless Wall Console GWWC-P

Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
Large buttons and attractive blue LED light makes the console easy to see in the dark.
The pulsating light has two optional speeds or can be turned off for maximum battery life.
Backlighting will turn red to notify the user of low battery.
Turn only the garage door opener light itself on at any time for steady light in the garage.

.......more details

210-0040

TNR Doors CurtainLok Assembly Kit Grey 5/ Kit (10 pcs) ** Price by Quote Only

5 complete curtain locks with fasteners per kit

MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

MD-00146

Sprocket 410B18 3/8" Bore NO KW 2SS

K001D8116-1

LiftMaster Power Board 3ph 230/460/575V L5 N4/4X

Complete kit includes: 3PH power board and standoffs required for installation

O02R9201

AirLift Bottom Cap Complete w/Seals

O02R9211

AirLift Metering Screw

O02R2011

AirLift Chain WP 11" with Turnbuckle *** By Quote Only

202-0022

TNR Composite Bottom Bar Arm for HDXL *** Price by Quote Only

GAREX-PAINT-BRN

Garex Touch-Up Paint Commercial Brown

GAREX-PAINT-BLK

Garex Touch-Up Paint Black

0.5 OZ

D029

ODCC Fire Door Adjusting Wheel

10.1002.9

Truck Door Rivet Mild Steel 1/4 x 1-5/16 - 1/2 HD Sold per Unit

Standard rivet used for installing #77 lock
5 rivets are required to install the handle Sold separately

K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
Complete replacement kit includes: logic board adapter harness and installation hardware.