BEARING007:Manaras Flange Bearing ID 1"

MGH-6236-1M00

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OTBH-6533-AM05

Manaras Trolley Operator 3/4 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)
Additional charge for doors over 12ft

OTBH-6532-AM05

Manaras Trolley Operator 1/2 HP 600V 3Ph Monitored Board w/N4 Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)
Additional charge for doors over 12ft

MGH-6533-M-N1-RH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OSH-6433-M-N1-RH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

OSH-6433-M-N1-LH

Manaras Opera-SH 3/4HP 480V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

OSH-6813-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 1 Ph Monitored ECB w/N1 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

OGH-6114-M-N1-RH

Manaras 1 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

CAPACITOR037R

Manaras Capacitor 340-408uf 165VAC incl. Bleeder Resistor

Replacement for capacitor037 on MOTOR256

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

OPH-6232-M-N1-LH

Manaras Opera-H 1/2HP 208V 3Ph with Monitored Board and N1 Photoeyes Left Hand

Monitored version with Nema 1 photoeyes

MOTOR318

Manaras Electric Motor 1 HP 120/240V 1Ph

Continuous duty C-flange TEFC 60Hz

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

SUPPORT008

Manaras Board Support 1" ** Special Order Only

SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

SUPPORT014

Manaras Board Snap Locking Support 7/16" ** Special Order Only

PULLEY015

Manaras Double Pulley

MOD151

Manaras 1-1/4" Output Reducer OGH 1/2 to 1HP

Add-on to a OGH operator

OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake
Includes PHOTO-061 Nema4

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake
Includes PHOTO-061 Nema4

OSH-6232-M-N1-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

MOTOR257

Manaras Electric Motor TEFC for N4/12 1/2HP 120/240V 1PH

Continuous-duty base mount TEFC 60Hz
For N4/12 type operators

REDUCER012

Manaras Reducer DSM 70 44:1 FR56C

OGH-6232-M-N1-RH

Manaras 1/2 HP 208V 3Ph Gear Head Operator w/Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

OPJ-6433-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake
#50 roller chain and sprocket on final drive
Full overload protection

OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)
Additional charge for doors over 12ft

HARNESS116

Manaras Opera ECB070 and Drive

OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

An industrial operator designed for use on standard high and vertical lift sectional doors
Can also be used on rolling doors and grills
It incorporates a floor level disconnect mechanism for manual operation
25 cycles per hour 100 cycles per day
Continuous-duty single phase capacitor start or 3 phase motor open drip proof
Mechanical brake
#50 roller chain and sprocket on final drive
Full overload protection

SHAFT048

Manaras Trolley Output Shaft

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

OGH-6535-M-N1-RH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

OGH-6214-M-N1-RH

Manaras 1 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting
1-1/4" output shaft with 1/4" keyway on 1-1/2HP and 2HP models

MGH-6534-M-N1-LH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OSH-6234-M-N1-LH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

Installation Manual

BOARD076R

Manaras Replacement Power Board

Used on all Manaras circuit board type operators

OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

Installation Manual

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

OSH-6532-M-N1-LH

Manaras Opera-SH 1/2HP 600V 3Ph Monitored w/ N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation brake and a floor level engaging device
Clearence: side room required 16"

SCREW002

Manaras 1/4"-28 x 1/4" Set Screw

BEARING048

Manaras Flange 2-Bolt Flange Bearing ID 3/4" Black

Replaces BEARING044

RGH-6214-MON-RH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Right Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to RGH ops

OTBH-6534-M-N1

Manaras Trolley Operator 1 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

OSH-6114-M-N1-LH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

Installation Manual

OSH-6114-M-N1-RH

Manaras Opera-SH 1 HP 120V 1 Ph Monitored w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

Installation Manual

OTBH-6212-M-N1

Manaras Trolley Operator 1/2HP 240V 1Ph Monitored w/N1 Photoeyes

The OTBH is a heavy-duty low headroom trolley operator
Designed for use on industrial standard lift sectional doors
It incorporates a drum-band type solenoid brake
25 cycles per hour 80 cycles per day
1/2 HP operators come with # 48 (410) roller chain
Includes PHOTO-070

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

MODKIT027 for field install simply plugs into the control board
Controls several auxiliary devices such as Strobe horn fan lights etc
Works with BOARD060
Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login

Manaras Flange Bearing ID 1"

DETAILS