Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

MOUNTSHAFT010

Manaras Hoist Shaft Kit for MJH (pre-1998)

BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
EQ2722

SkyLink 3/4 HP Garage Door Opener with 2 2-Btn Keychain Remotes ** Discontinued

  • The DC motor offers additional benefits with very quiet operation and much less vibration.
  • It is ideal for garage doors that are below a living room or bedroom.
  • The DC motor also offers the soft start soft stop features which reduces the vibration and wear and tear of all the mechanical parts
  • Features: Rolling Code Technology Soft Start Soft Stop Optimal Force Learnings and Safety Beam Sensors.
  • Available in either Belt or Chain drive
  • Includes two 2-btn keychain remotes # MK318-2
  • .......more details
R5995

Shaft Collar 1-1/4" Double Split

26-942255

Truck Door Bottom Panel with Hardware (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Primer Finish
  • Comes with 18" pull strap assembly two bottom roller shaft covers and stud plates standard lift handle two u-bolts flexible PVC bottom seal and aluminum seal retainer.
  • .......more details
K72-19975

LiftMaster Clutch Shaft and Sprocket Assembly

  • Assembly includes: Clutch shaft 1" keyed flange bearings Dual sprcket 32/14 Splined core sprocket E-ring Compression spring Pulley assembly Washers Thrust bearing Retaining ring Slined hub and roll pin
OPH-6232-CONT-L

Manaras Opera-H 1/2HP 208V 3Ph Contactor Left Hand

CONTACTOR008

Reversing Contactor Struthers Dunn 115VAC

33106

Overload 5.50 to 8.50A

9150000622

5/32" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
9150000621

1/8" Sleeve ONLY 100/pkg

  • Sleeves only 100 per pack
.250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
K20-1050B-2P

LiftMaster Electric Motor 1/2 HP 115/230V 1P Base Mount

  • Replacement motor for BG770 BG790
  • Same as 20-1050B-2
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
7001-WG-8-MO

Residential Wood Grain Side & Top W/S Medium Oak 8' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
7001-WG-9-MO

Residential Wood Grain Side & Top W/S Medium Oak 9' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
7001-WG-10-DO

Residential Wood Grain Side & Top W/S Dark Oak 10' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
7001-WG-7-MO

Residential Wood Grain Side & Top W/S Medium Oak 7' Long - Painted Screws to Match

  • Medium Oak retainer with Medium Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
7001-WG-10-CO

Residential Wood Grain Side & Top W/S Cherry Oak 10' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
  • .......more details
2'6X6SC50

Devanco Loop 2'6" x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
97799

Marantec Shark Tooth Position Reference Tab Belt Rail (96834)

  • Same as part number 96834
  • For belt rail
39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

111420.001.S

Overhead Cut-Off Switch for RSX Operator

  • Interlock switch for Overhead model RSX
MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-18

Top Cap 1-3/4" 18 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-14

Top Cap 1-3/4" 14 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
71-B3PH

LiftMaster Internal Brake Kit w/Solenoid 208V/230V 3PH for L5 Operators

  • Works with Logic 5 commercial operators and SL585/SL595 U and UL gate operators
MK-00098

Micanan Boot for Cut-Out Switch

UNI-100-162

Uni-Size Bottom Weather Seal 16'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
UNI-100-82

Uni-Size Bottom Weather Seal 8'2" Long *To extent of inventory*

  • Fits most standard doors 1-3/8" thru 2" thick
  • Pliable in all temperatures
  • Accepts pneumatic or electrical edge
  • 15 pieces per box
.295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
.295-134-L

Cut-to-Length Torsion Spring .295 x 1-3/4" Left Hand Wound Blue

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MD-00003

Sprocket 41B36 x 1" Bore 1/4" Keyway

  • 2 set screw 5/16
K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

  • Reset switch and Harness
K20-1050B-2LP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph L3 L4

  • Standard 1/2 hp motor
T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
5001-10-CHARCOA

Residential Side & Top Weather-Strip 10' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
  • Sold by full case quantity (20)
1104-ASFT-8FT

Elton Aluminum Stiffener for 1104 8ft

  • Prevents the 1104 from buckling in the hot sun
25-4002-5K

LiftMaster 1.6-2.5 Amp Overload Fuse

  • For models: SL585-100-53 SL595-100-53 SL575-100-53
25-2006

LiftMaster 6 Amp Overload Fuse

  • For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81
T012

Manaras Trolley Track 12ft for 1/2HP models *Actual length 174"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

26-40045

Truck Door Offset Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Co-extruded using rigid PVC backing with flexible PVC seal.
  • To be used with the offset U-channel retainer only (26-40037 or 26-40039)
26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
MAW123-BLK-RH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.
HSCC112

Hinge Combination Hinge Clopay Style 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
VBELT_4L370

Manaras VBelt 4L 37"

  • Used on MJH models from 1980 - 2000
HSCFV112

Hinge Full Vision Hinge Clopay Style "B" 12-ga Stainless Steel

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Use on Clopay Brand Full Vision Products
MK00488-NM

Micanan Electronic Circuit Board Non-Monitored

  • Replacement board for PRO-LH (50-11)
  • Board does NOT have terminals P1 & P2
  • Up to 20 transmitters can be programmed
MA117

LiftMaster Counterweight for Arms 15ft & Up

MA116

LiftMaster 17 ft Aluminum Arm Round Yellow/Black Stripes ***NLA Repl. by MA116RDOT

  • Used on Mega Arm gate operators
  • Requires counterweight model MA117 - sold separately.
  • Size: 17 feet long x 3" round
  • Arm opening area: 14ft (end of cabinet to arm tip)
  • Replaced by MA116RDOT
308911

Linear 1-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
  • .......more details
MK00737

Micanan Feature Circuit Board with Contactor Interface Non-Monitored 575V **use MK00642-NM

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
  • Non-Monitored
412001

Linear 2-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
  • .......more details
97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

  • For angle application
  • For use with Light Brush or Vinyl Insert.
  • For applications that require both brush and vinyl
4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

  • For angle application - 90 degree
  • For use with Light Brush or Vinyl Insert.
  • For applications that require both brush and vinyl
GH4416-07-L

Green Hinge #7 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-07-R

Green Hinge #7 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-05-R

Green Hinge #5 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-04-L

Green Hinge #4 12-ga Left Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-03-R

Green Hinge #3 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-L

Green Hinge #1 12-ga Left Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
K23-19380

LiftMaster Reset Switch for LA400

IG2-P1

Miller Edge Pair of Pedestal Mounts for IG2 Eyes

  • Flexible spring loaded pedestal stand
  • 30 degree of flex
  • 27" high from bottom base to photoeye
RS10311

Roller 3" Steel 11" stem 10 ball

  • Steel Roller Wheel diameter: 3"
18FT-TROLLEY-SET

LiftMaster 18ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs) *Actual length 251"*

  • Double Angle Rails for doors up to 18' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-48-320

Extension Spring 8' Door - 320 lbs Green

  • Single - Loop
  • 27" long 48" stretch 320 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-240

Extension Spring 8' Door - 240 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 240 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-200

Extension Spring 8' Door - 200 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 200 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-180

Extension Spring 8' Door - 180 lbs Gold

  • Loop ends
  • 27" long 48" stretch 180 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-170

Extension Spring 8' Door - 170 lbs Orange

  • Single - Loop
  • 27" long 48" stretch 170 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-140

Extension Spring 8' Door - 140 lbs Blue

  • Single - Loop
  • 27" long 48" stretch 140 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
H12G09-SS

Hinge #9 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
502-0022

Reversing Edge BEP 100C Air Tube 4" from End Edge Length 93.5"

H12G06-SS

Hinge #6 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G05-SS

Hinge #5 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
H12G03-SS

Hinge #3 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
KSWG-0623

LiftMaster Rear Connector with Pin for LA500DC

Z9967

Roller Chain Puller *** To Extent of Inventory

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
42-8116-1

LiftMaster Terminal Block 16-Position

ME120-BLK-E-6FT

Miller Edge 2-Wire Black End Outlet 6 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
MP00015

Micanan Up-Charge Track and #410 (#48) chain for 16' h Door *Actual length 222"*

  • For 1/3 HP and 1/2 HP operators only
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
MP-00044

Micanan, Drive Chain #40 Modification for Trolley Operators, 18' High Door, In Lieu of #41

  • Chain modification when purchased with any of the following operators; PRO-T, TB, APT and GT
4X3PO50

Devanco Loop 4' x 3' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep