Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Pivin
MK-00696

Micanan 4-Pole Terminal Strip

MK-00046

Micanan Overload Reset 1-Phase 20 Amps

MK-01155

Micanan Transformer 460V-24V-50VA

MV-00214

Micanan Tele 8" Wand (For Utility Switch)

MP-00076

Micanan Heavy Duty Front Idler (Trolley End Bracket) #41

MP-00075

Micanan Heavy Duty Front Idler (Trolley End Bracket) #410

MM-00327

Micanan L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00931

Micanan Single Btn Mini Transmitter ** Discontinued

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

  • In closing cycle door will stop for 0.5 seconds and reverse to fully open
MP-00081

Micanan Double V-Belt Mod. for PRO-J H HHD

  • Provides added strength to the belt drive system
MV-00018

Micanan Key Switch ON/OFF Nema 4 Surface Mount

MV-00304

Micanan Wireless Key Switch

MV-00015

Micanan Key Switch O/C/S Btn Tamper Proof Nema 4 Surface Mount

MV-00011

Micanan 3-btn O/C/S w/Key Lock-Out Nema-4 Pushbutton Control Station

  • Surface mount
MV-00004

Micanan 2-btn O/C Nema-1 Pushbutton Control Station

  • Flush mount
MV-00172

Micanan LCE-3 Nema-1 Pushbutton Control Station

  • Flush mount
MK-00522

Micanan Relay 24 VAC 8-Pin Plug-In

SD105L5-RH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Right Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-514-L

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.306-2-L

Cut-to-Length Torsion Spring .306 x 2" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-200-INSTALLED
PRO-J-7523-U-LH

Micanan 3/4HP 230V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
BOLLARD_4'

Bollard 6" Dia. x 1/4" x 48" High Capped (w) Base Yellow Powder Coat

  • 6" Diameter 1/4" Steel Wall 48" High Base Plate is 10" x 10" x 1/4" Thick 5/8" Holes for Mounting Powder Coated Yellow
2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
PRO-J-7583-U-RH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
PRO-J-5053-U-LH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10011-U

Micanan 1HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5011-U

Micanan 1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

  • On-Board receiver holds up to 20 transmitters
ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 265
  • White #431 on reverse side
Colour chart
SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

  • 140g
ALUM-507

Aluminum 24" x 100' Spool Tan / Tan # 507

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 507
  • Reverse side is #431 Bright White
Colour chart
ALUM-5P6

Aluminum 24" x 100' Spool Iron Ore / Minerai de Fer # 5P6

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 5P6
  • Reverse side is #431 Bright White
Colour chart
.393-334-R

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-APTB-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

  • Low clearance design for APT applications (9.5")
  • Door speed: 12" per second
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10023-U

Micanan 1 HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 & 1 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7523-U

Micanan 3/4HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-7511-U

Micanan 3/4HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-T-5025-U

Micanan 1/2HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-5011-U

Micanan 1/2HP 115V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
SC-6

Wheel Chock SC-6 Aluminum

  • Excellent Surface Grip on Tire and Ground
  • Lightweight Aluminum
  • Size: 6" wide x 6-1/2" long x 6" high
68-9U

Wheel Chock 68-9U Pyramid Rubber with U Handle

  • Handles for chain fastening
  • Long Lasting 80 Durometer rubber
  • Size: 8" wide x 9" long x 6" high
BG770-50-11

LiftMaster Industrial-Duty Barrier Gate Operator 1/2 HP 115V 1 Ph *Discontinued Replaced by MATDCBB3*

  • A reliable gear-driven barrier gate operator that is perfect for industrial applications.
  • This barrier gate supports arm lengths of up to 15 ft.and arms weighing up to 25 LBS
  • 2-btn control station Open/Close
  • Fully adjustable limit system
  • Pad mount
  • Security+ 2.0 technology
    • .......more details
31337

Doorlec Idler Sprocket with Oilite bushing 50B12 for a 1" Shaft

RELAY039

Manaras Relay 3-Pole 24VAC

BPPB1759

Garex Bottom PVC Moulding for 1 3/4" Door White U shaped 108"(9')

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
2200-926

Linear Gear Reducer 60:1 Models SWR SWD

DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

  • 120" High Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x 2" hardened cup point set screws installed with red heads.
  • Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
  • Maximum high lift: 120".
  • Maximum door height: 144" + High Lift.
  • Rated lift per drum: 500 lbs.
    • .......more details
CAPXL

LiftMaster Connected Access Portal High Capacity

  • Connected Access Portal High Capacity Cloud-based access control for residential communities.
  • Capacities: 4 Controlled Gates/Doors
  • Wireless Link for up to 8 LiftMaster® Operators
  • 4 to 8 Digit Entry Codes
  • 4 to 6 Digit Directory Codes
  • 50000 Local Resident Capacity
    • .......more details
MM00021

Micanan Disconnect Lever MSI0012

RATCHET_BAR

Rachet Bar for Holdown Assembly

HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
E/1929/031

Automatic Systems Installation Plate Ass'y BL229

  • Used on the BL229 gate op.
15480

Doorlec Heater Strip 175 W 575 V

T

Molded Rubber Bumper Black 22" L x 10" W x 12" W 3" Projection Centered Reflector 3-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
  • Bumper comes with 3 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
    • .......more details
LB1210-36

Laminated Bumper Standard Black 10" x 36" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1210-24

Laminated Bumper Standard Black 10" x 24" 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB1024-11

Laminated Bumper Black 10" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1010-36

Laminated Bumper Standard Black 10" x 36" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB924-11

Laminated Bumper Black 9" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
Q080

LiftMaster Dolly Latch Kit K75-50138

  • For Liftmaster trolley operator HCT
K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

LLB620-22SF

Steel Faced Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
    • .......more details
LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB624-11

Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-14

Laminated Bumper Standard Black 12" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
PRO-GHC-30053

Micanan 3 HP 575V 3P Gearhead Operator No Controls

Specification sheet
65_52091-12

LiftMaster Manual Hoist Mod. M8 #41 Chain for 12ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
34115

Doorlec Awning Pulley 194 x 1"

  • Used on model LDJ & LDJ-3
R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

  • Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
  • The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
  • A special algorithm allows to keep synchronized transmitter and receiver.
  • Range up to 250 m (820 ft)
  • Ergonomic rugged & durable
  • Battery: Two 3V lithium battery (CR2016)
    • .......more details
K10-36183

LiftMaster Battery Tray for 33AH Batteries

  • For use with LA500
Z9211-3

Stationary Cone Tool 3-3/4"

  • Easily dislodges the cone from the torsion spring
LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
PRO-X_MOD-1HP

Micanan Explosion-Proof Modification N-7/N-9 for 1/2HP - 1HP

  • Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.
MOD027B

Manaras Auxiliary Output Module Modification

CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

  • Limit cam / limit nut
BINS-SANDSTONE

Utility Bin Heavy-Duty Stackable Sandstone *** No Longer Available

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

  • Comes with keyway and 2 set screws
  • Used on PRO-GHCW
MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

  • Used on PRO-GHC
  • 4 required per operator
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

A8833-PB

Allstar Replacement Square Push Button Only White Sold Individually

  • Square white button fits Allstar remotes # 8833 8833TC 8833T-OCS
COLLAR004

Manaras Collar 5/8"

.363-334-R

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
TRACK-SET-2LH-138

2" Tracks Set 7'-0" Low Headroom Torsion 1-3/8" Door Clips for Wood Frame 12" Radius *** By quote only

VWS-34-SANDSTONE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Sandstone

  • Pan head
  • S point
STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA