Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Bottom
GALV-273-334-144-L

Torsion Spring .273 x 3-3/4" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-334-144-L

Torsion Spring .243 x 3-3/4" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 3-3/4"
  • Length: 12 ft
  • Galvanized Stenciled
OMJ-6112-M-N1-LH

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Monitored Circuit Board N1 Eyes Left Hand

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
K23-3001

LiftMaster On/Off Switch 125/277VAC 20A

  • Also known as: G233001 233001 23-3001
  • For use with various LiftMaster® Commercial Gate Operators
MGH-6536-M-N1-RH

Manaras 2 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K41-0156-000

LiftMaster Cable Tension Monitor Left Side

  • For use with various LiftMaster® MAXUM Series DC 700 lbs. to 2200 lbs. Standard-Duty and Extended-Duty Jackshaft Jackshaft Hoist and Trolley Commercial Door Operators
  • This service kit is compatible with the following MAXUM models: JDC JHDC and TDC.
  • NOTE: Refer to K41-0157-000 for Right-Side Cable Tension Monitor
XF208VAC12

LiftMaster 208V Transformer Kit 1200

INFLAT-DOCK-SHLTR

Inflatable Dock Shelter *** Made to Order Sold by Quote Only

  • Custom order item. Sold by quote only
BEA-10LIGHTBKT-TL

BEA Modular LED Signal Light Bracket

  • Bracket only for modular LED lights.
BEA-10LIGHT-TG

BEA Modular LED Signal Light Segment Green

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
2200-540

Linear Replacement Key for BG Snap Lock

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

  • This item is compatible with BRAKE011
2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

41184R

Genie Transformer

  • Works with Overhead Door Infinity 2000 9020 & 9120
  • Works with Genie 6070H 6070H-B 6170H 6170H-B 6172H 6172H-B 6072
  • Same as: 41184 41184R 41184R.S
V3564-PER-FOOT

Vinyl Seal 4" Bottom Bead End Grey Sold per Foot

  • Bead diameter 3/16" - 7/32" +/- tolerance
2400-501

Linear Retaining Ring

E/1929/066

Automatic Systems Balance Spring Ass'y 7.0 MM BL229

  • Used on the BL229 gate op.
SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

ADAPTER008

Manaras XPL-P16 Thread Bushing

SB257B2

NICE Filter Board w/T3.15A Fuse

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

  • Open/Close/Stop remote for 1 door
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

  • Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
  • DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Worm gear reducer 40:1 ratio for high-torque and long life
  • Solenoid Disk Brake Prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Optional Friction Clutch available
    • .......more details
CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
OPH-6533-M-N1-LH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
GEAR001

Manaras Bevel Gear GH/MGH 5/8" 20 Tooth

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

Q277

LiftMaster Wiring Harness Kit DC2000 K94-50262

  • Compatible with LiftMaster® Models SL3000 and CSW200 Perimeter Access Systems
FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

  • MOD073
2376.187*29.900

Whiting Torsion assembly .187 wire size 29" spring length 90" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
2200-968-UPS

Linear Sprocket 40B22 1" Oxided UPS

NINJA-001-BLACK

Rodent Ninja Garage Door Corner Guard Set

  • Blocks pests from entry
  • Fills in holes and gaps along garage door frame
  • Keeps insects mice and unwanted guests outdoors
  • Kit includes: (1) Right and (1) Left handed Garage Door Corner Guard (6) Self-tapping Screws
  • Made in the USA
E/BLOP/130

Automatic Systems Kit for Breakaway Arm BL229 Option ** Price by Quote Only

  • This is an option for the BL229 arm
GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
  • Galvanized
K23-11442

LiftMaster Limit Switch SPDT w/Roller and lever

  • Same as 23-11442
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-295-334-L

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Galvanized Blue Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
K20-8100M-DC

LiftMaster Motor 1HP 90VDC 1PH

  • K20-8100M-DC is a 1HP Motor Replacement Kit (90VDC BM CF). For use with various LiftMaster® 1HP 1-Phase Commercial Door Operators and Gate Operator Systems
PRO-GH-20053U-R

Micanan 2 HP 575V 3P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
GEAR014

Manaras Disconnect Bevel Gear 5/8" 20 Tooth OGH

OPH-6114-M-N1-RH

Manaras Opera-H 1 HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

  • Screw together window kit
  • Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
  • Cut-out size: 25-1/16" x 12-9/16"
  • Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
  • Different glass options and frame colours are available upon request
GAREX-PAINT-KAKI

Garex Touch-Up Paint Kaki

OHJ-6113-M-N1-RH

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 120V 1 Ph Monitored ECB w/N1 Photoeyes RH

  • 25 cycles per hour 100 cycles per day
  • An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
  • Specifically designed to motorize grills when a manual egress is required
  • Mechanical brake
  • Hoist on right standard
  • Full overload protection
    • .......more details
41832R.S

Genie Service Head 6070H/B 6170H/B

  • FOR REPLACEMENT OF JACKSHAFT OPERATOR SHAFT RELEASE OR MOTOR ASSEMBLIES
  • Head Service Kit for 6070H/6070HB and 6170H/6170HB
  • Special Order Price by Quote Only
  • This kit includes the complete motor but does not include the circuit boards transformer or cover for the 6070/6170 unit.
OSH-6213-M-N1-LH

Manaras Opera-SH 3/4 HP 240V 1 Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
301010

Whiting C-4 Anti Lozenge Bracket Curb Side ** Price by Quote Only

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

  • Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
  • 12" x 2.5" Mounting Face
  • Fasteners NOT Included
  • Carbon Steel Black Powder Coated
MC22-2WIRE-RH-BLK

Miller Edge MC22 2-Wire Non-Monitored Right Hand Black Includes Funny Flaps - Sold per Foot

  • Electromechanical sensing edge for use on Cornell doors. •The MC22 is manufactured to exact specifications. •The MC22 is completely flexible and will contour to curved surfaces. •Touch sensitive signaling allows immediate reversing or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Vertical or horizontal mount •One year warranty
Worksheet
2704.143_150

Whiting Roadside Torsion Spring for Cube Truck Roll-Up Doors 15" Long

  • Torsion spring for cube trucks with small roll-up doors
  • Specs: .143 x 2-3/16" x 15" Long
  • For Curbside order part # 2705.143*150
OGH-6115-M-N1-RH

Manaras 1-1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

  • Used on the BL229 gate op.
K76-34644

LiftMaster APS Encoder 24V

  • Compatible with various LiftMaster® Commercial Swing Gate Operators
110001-BULB-PER-FT

Janus T-Bulb Astragal Black Sold per Foot

  • Fits Janus mini storage doors M650
  • Bottom weather seal only no retainer
NO_HAR-11

EMX Detector Only No Wiring Harness Included

NO_REFLECTOR

Garlo Gavazzi No Reflector Required

TRANSF168

Manaras Transformer 480X600-240V 60HZ 1500VA Leads Rapido

  • 480X600-240V 60HZ 1500VA LEADS
2050Z

LiftMaster HD Roller Cage Bearing Hinge Bolt to Gate/Post Zinc Coated Sold Individually

  • Heavy Duty Roller Cage Bearing Hinge - Bolt to Gate Bolt to Post (Corrosion Protected Zinc Coated)
  • Heavy Duty Construction for Maximum Durability
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Convenient Bolt-On Model
    • .......more details
MOTOR481

Manaras Electric Motor 1 HP 600V 3PH TEFC Brake ** Special Order

LVB620-11/P1

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
BEARING058

Manaras Needle Roller Thrust Bearing 1" ID

  • 1-9/16" OD 5/64" Width
  • Replaces BEARING025
CRBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
OGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
K80-38735

LiftMaster Vent Plug Kit HCTDCU

OSH-6533-M-N1-RH

Manaras Opera-SH 3/4HP 600V 3Ph Monitored w/ N1 Eyes

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation brake and a floor level engaging device
  • Clearence: side room required 16"
RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
5001-12-BLACK

Residential Side & Top Weather-Strip 12' Long - Black

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
1104-18-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
2807.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 27" Long
  • For Roadside order part # 2806.177.270
CGT101L5

LiftMaster Heavy Industrial-Duty Trolley Op. 1 HP 115V w/Carwash Mod. N4

  • Suspended from the ceiling the operators are used on sectional overhead doors with a standard lift.
  • GT operators are directly attached to drive and control the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App.
  • High-starting torque continuous duty motor with overload protection
  • Door speed approx. 11-12 inches per second
    • .......more details
VKP1-LM

Special ends 2023-11-30

LiftMaster MyQ Video Keypad

  • Create unique PIN codes and schedule access for family guests and service providers
  • Visual Confirmation: Get peace of mind by seeing that loved ones have arrived home safe and sound
  • Receive real-time notifications and view history of when the garage has been accessed by members of the household
  • Easy Installation: Enjoy wireless setup with a rechargeable battery and integrated Bluetooth® for fast Wi-Fi® provisioning
  • Call Button: Unexpected visitors can initiate 2-way audio communication with the myQ account owner to request access
  • Compatible with LiftMaster Chamberlain Craftsman AccessMaster and Raynor garage door openers made after 1993
    • .......more details
PRO-JB-7553-U

Micanan 3/4HP 575V 3P Jackshaft with Brake Mon ECB N1 Eyes Universal Mount

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake included recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
DISCONNECT008

Manaras HDW Brake Release MTBH

2376.187*31.950

Whiting Torsion assembly .187 wire size 31" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
41A5507-6

LiftMaster Receiver Logic Board for 2500B/D (390 Mhz)

  • With end-panel
  • Also known as 41A5507-6C 41A5507-3
OSH-6112-M-N1-RH

Manaras Opera-SH 1/2HP 120V 1Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
J501L5

LiftMaster Industrial-Duty Jackshaft 1/2 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
OSH-6113-M-N1-RH

Manaras Opera-SH 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
PRO-4X_MOD-1PH

Micanan Nema 4X Modification 1/2HP- 1.5HP 1-Phase

  • This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
  • For options M & U Micanan N-4X photocells are supplied
  • 1/2HP to 1.5HP Motors
111854.0005

Overhead Logic Board 1/2HP 575V 3Ph RSX/RHX

  • For RSX/RHX commercial ops. 575V
K07-8063

LiftMaster Upper Crank BG790

  • Also known as: 07-8063 078063 G078063
K94-37695

LiftMaster Electric Motor 1/2HP

  • Replacement motor for SL585503U
K74-39295-2

LiftMaster E-Box UL325 SL585

  • K74-39295-2MC is a Electrical Box Replacement Kit with UL325 Safety Standards and Compliance Regulations
  • For models SL585503UL SL585103UL
IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • UL325-2018 compliant
  • Six (6) monitoring interfaces
  • 60 ft. operating range
  • Easy installation and set-up
    • .......more details
SMF5005K

Serco Holdown with Rack Bar ** Price by Quote Only

  • A brake band hold-down for a mechanical dock leveler includes a frictional brake that grabs the hold-down when the ramp is at the proper elevation.
  • If additional upward force (this can happen when trailers move up and down when trucks are loaded or unloaded) is applied to the ramp the frictional brake will give way just enough to accommodate the change.
  • This prevents the dock leveler ramp from being damaged.
  • For Serco mechanical dock levelers
P-9931R-4F

Pulsar MVP 1-Channel 4-Wire Gate Receiver 318 MHz P-111645

  • One channel
  • 4-wire operator connection
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
Programming instructions
P-8833TC-OCS

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

  • Allstar compatible
  • OPEN-CLOSE-STOP 3 doors
  • 8 dipswitches 318 MHz
Programming instructions
K41-0259-000

LiftMaster Chain Guard IHSL/ INSL24UL

MTS1

Linear 1-btn MegaCode Transmitter 318 MHz (DNT00091)

  • Activates one 318 MHz MegaCode receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming instructionsInstructions de programmation
16-2101

LiftMaster Vbelt 3L 25" 3L250 *** NLA

  • This is a replacement Belt (3L250).
  • Compatible with LiftMaster® Model SW470GL Swing Operators
  • Also know as: K16-2101 G162101 162101
4580-304-SLATE/GY

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Slate Grey 458-22

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
4580-304-CHOC/BRN

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Chocolate Brown 458-19

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
2376.162.18.870

Whiting Torsion assembly .162 wire size 18" spring length 87" shaft

SPR50B18X114

Sprocket 50B18 1-1/4" shaft 1/4" KW

  • 18 tooth sprocket for #50 chain
L504AL

LiftMaster Monitored Large Profile Resistive Edge w/ Aluminum Channel 4ft

4580-304-ALMOND

Adseal DWS Weatherseal Silicone Adhesive Sealant 304ML Almond 458-11

  • 304ml cartridge
  • Ideal for movement and perimeters joints
  • Meets ASTM C920 S NS Class 50 NT M GA O
  • Meets AAMA 802 and 805 standards
  • Can be used on aluminum glass masonry some plastics painted and unpainted metals & does not yellow
  • Excellent resistance to UVs for indoor and outdoor use
    • .......more details
2376.206.325.890

Whiting Torsion assembly .206 wire size 32-1/2" spring length 89" shaft

1-0316

Richard-Wilcox 22 x 31 Track Bracket Double Zinc Plated

  • 1/2" clearance needed between doors. Maximum door thickness of 2"
  • Weight: 3.5 lbs
  • Capacity: 400 lbs 500 lbs
  • Material: Formed Steel 3/16" thick