Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Motion
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
TRACK-GUARD-60

Track Guard 60" Tall Safety Yellow With Base Sold as a Pair

  • Provides impact protection to vertical track
  • 45° angle flange adds strength protects from side impact.
  • 7-gauge steel construction powder coated safety yellow for high visibility.
  • 1/4” foot plate drilled with slotted holes for three 1/2” anchors.
  • Wall flange drilled with slotted holes for four 3/8” anchors
  • Includes: (right) and (left) sides
    • .......more details
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
LIMIT-SHFT-ASY-XP

Lynx Complete Limit Shaft Assembly for Explosion Proof Op.

  • Special order
  • Includes bearings cams and sprocket
50183

Doorlec Brake Assembly 575V

  • Brake assembly consists of solenoid drum shoes plate spring cover and fasteners
  • For all V-belt driven models that have brakes
16-8002

LiftMaster Cogged Vbelt 4L330

  • Fits BG790 barrier gate opener
CHK-991

Chain Hoist Keeper

  • Chain hoist keeper is not the same as the chain keeper
CAP-450-540-110V

Capacitor 450-540 MFD 110/125V with Resistor

  • Same as CP-CAP-COM-450-540
  • Motor start capacitor
CF-101-16

Commercial Side & Top Weather-Strip 16' Long Aluminum / Vinyl

  • Same as Garaga CF101
CF-101-10

Commercial Side & Top Weather-Strip 10' Long Aluminum / Vinyl

  • Same as Garaga CF101
785149

FAAC XP15B Photocells 15m Range 785103

  • Surface mounted security devices with 15 m range.
  • The kit contains: 1 transmitter and 1 receiver.
  • The photocell has a BUS system technology "2easy" for easy installation.
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
LITH-9V

Battery 9 Volt Lithium

42413

Pillow Block Bearing Housing Set GP-3

  • Can be fitted with bearing # 28301
37502

Doorlec DC-2000 Electronic Circuit Board for Constant Pressure Close

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • Programmed to work with constant pressure to close
PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
Installation manualSpecification sheet
2807.192.340

Whiting .192 x 2-3/16 x 34" Curbside with Cones

MI00001

Micanan Motor Pulley 5L 5/8" ID x 2" OD

7812

Whiting Bottom Seal Truss Door White 90" Long

  • Fits Fed-Ex truck doors
BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • Barrier equipped with control unit allowing operation perfectly adapted to every situation
  • Change of configuration or operation possible even after initial installation of the product
Bilingual parts catalogueTechnical manual
37558R

Genie Belt Drive Sprocket Assembly

  • Complete assembly for the belt sprocket on top of the machine.
  • Works with the following models: IntelliG 1200 and IntelliG 1000
HDC-123-208-C-R

Lynx Ind. Jackshaft with Hoist 1 Hp 208V 3ph Contactor Right Hand

  • 1/2 3/4 1HP 115-230-460 or 575V single or three phase motor capacitor start overload and under voltage protection.
  • Solid state circuit board Lynx-6000. Built in 1.5 second delay.
  • 5L V-belt primary reduction #50 drive chain and sprockets.
  • Adjustable friction clutch magnetic solenoid brake.
  • Precision pillow block bearings on output shaft.
  • Fully driven adjustable limit switches.
    • .......more details
.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

  • Spring only with loop ends
Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

  • Includes harness and 4 limit switches for Miracle One
ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
1058050002

Overhead Limit Cam Snap On for OHD Chain Model

  • For Overhead models #456 #551 #556 and the #65 series
  • Also called Limit Actuator
  • 105805-0002
G-21X13-134-W

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door White

  • For 1-3/4" thick door
720118

FAAC Latching Plastic Enclosure

  • Dimensions: 4.65" x 8.38" x 0.6"
02-409

LiftMaster Key Switch 2-Position Nema 4/12

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Tamperproof
  • Die cast metal enclosure with standard key cylinder
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only. Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Dimiensions: 3" x 3.2" x 4.2"
    • .......more details
41AC150-1M

LiftMaster Electronic Circuit Board Assembly 315 MHz *** NLA Repl by 41AC050-1M

  • For Sears / Craftsman garage door opener
7001-12-CHARCOL

Commercial Side & Top Weather-Strip 12' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
CABLE-NR-316-SS

Cable No Roll 3/16" 19x7 Stainless Steel 500ft

  • 19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
  • A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
PRO-HB-7511U-RH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
Installation manualSpecification sheet
WINDOW-21X13

Garaga Clear Thermo 21 x 13 White Frame 1-3/4" **** USE CODE G-21x13-134-W

MEA2

Nice Key Unlock System for Metro Gate Op.

  • For underground gate operator
CB116A0500

Cable 1/16" 7x7 500' Galvanized

  • Galvanized cable 1/16" 7x7 500ft spool.
2B737

LiftMaster Output Board EL25

  • Output board for models EL25 and EL2000 (041B0737)
MD-00006

Sprocket 41B10 x 3/4" NO KW 2SS 1/4

C16-32FHD

Bearing 1" x 2" Press Fit Heavy-Duty

  • Flanged ball solid steel bearing
  • Rating: 1 000 000 revolutions
  • Axial load: 150lb max
  • Radial load: 900lb max
C20-SR

Bearing Retainer for 1-1/4" (PFL6Z)

  • Same as PFL6Z. Bearing flangette only.
  • 1-1/4" press fit
PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

22210

Push Button Station 3 Oval Buttons O/C/S Flush Mount ** discontinued. To Extent of Inventory

  • Three button wall station Open/Close/Stop
  • NO contacts on the Open and Close buttons
  • NC contact on the Stop button
  • Stainless steel surface plate
  • Flush mount
MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

  • Designed for use on rolling sheet doors.
  • It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
  • Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
  • Floor level disconnect
  • 24V NEC Class 2
  • Wiring is factory present to C2 mode
    • .......more details
Installation manualSell sheet
FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

  • Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
  • 304L rust-resistant stainless steel
  • 12 gauge
K20-1050B2LPH24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 5

  • Standard 1/2 hp motor for new L5 operators
MD-00034

Micanan Connecting Link #410

ST-CLEAR-TUBE

Soft Touch Clear Tubing Sold per Foot

29202

Doorlec Transformer 550Vpr 120V sec. 35VA

CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

  • Flexible magnetic material with an embossed finish
  • 100 piece contains ten each of numbers 0-9
  • Priced per box
MALED17

LiftMaster LED Barrier Arm 17 ft

  • The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
  • Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
  • Ideal for use with the Mega Arm and Mega Arm Tower
  • Counterweight required part # MALEDCW
J751L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 115/230V 1Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Installation manualManuel d'installationSell sheetBrochure
15-19478

LiftMaster Sprocket Assembly

  • For model H (2005-present)
  • 48B32T with hub
420001

Linear Wireless Keypad Multi-Code 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • 4-digit access code
  • Backlit keys
  • Weather-resistant keyless entry station transmitter
  • Easy access to battery
  • Power: 9-volt battery
    • .......more details
JDMG-HOIST

GDI Axial Chain Hoist Kit Nema 4 for JDMG-LG

  • Can be added in the field
Sell sheet
D6375-164

Cable Drum High Lift 164" 1" Bore Torque Force Pair

  • Maximum hi-lift: 164"
  • Capacity: 800 lbs per drum
  • Cable length: Floor to shaft center 181" minus amount of Hi-Lift
  • Cross reference: DNS 410-164 OMI 164HL M162-4165
RESET007

Manaras Resettable Overload Fuse 10A 1 Phase

PRO-HHD-7511R-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft with Mechanical Contactor Left Hand (PRO HHDR)

  • 3/4 HP 115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Electro-Mechanical Control Circuit (non-circuit board model)
  • 3-btn open/stop/close (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
S2TR2641E1

Erone 1-Channel Mini Transmitter 433MHz

  • Open/Close remote for 1 door
  • Palm-size transmitters 83 x 48 x 16m (3.25 x 1.9 x 0.6in)
  • Learn button programming
  • Ergonomic stylish design Rugged & durable
  • Light grey base with yellow buttons
  • unobstructed range: 820 ft (250m)
    • .......more details
Sell SheetBrochure
SERVICE-6220

Industrial Duty Rolling Steel Non-Insulated Service Door

  • 22 gauge
  • Max size: 18'4" max std. width 20'4" max std. height
  • Slate type: Curved
  • Finishes: Gray White Tan Brown or Galvanized
  • RAL Powder coat option in 188 colors
1458W

Fasteners Self-Tapping Stainless Steel Hinge Screw with Washer 1/4" x 5/8"

  • 400 Series Stainless Steel
  • Self Threading
  • Washer Head with Rubber Seal
  • Use with Stainless Steel Garage Door Hinges
MK00108

Micanan Telemecanique Contactor 24V for Logic Board with Contactor Interface

  • LC2K1210B7 mini contactor
MH00009

Micanan Flange Bearing 1" ID x 2" OD

  • 2 required per operator
9372054125

Square Torsion Spring .343 x 5-1/4 x 41.25" with Cones LHW

  • 41.25" long = 160 coils
41ASWG-0119

LiftMaster Release Keys for LA400 & LA500 Qty: 2

K1D8052-1CC

LiftMaster Control Board for LA500DC LA400 LA412

  • 014D1270D
8030196

Marantec Belt Connector Kit

  • Works for all Marantec Belt Drive Openers
  • For models: Mac Lift M4500M4700Q7500Q7700 M4500e M4700e
  • Includes two connector pieces and four screws
  • Not for use on the heavy duty rails used by Q7900 & M4900e
SL18-ZP-COPPER

Zinc Plated Copper Sleeve 1/8" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST18COP. Stops are not zinc plated
41DS002-2

LiftMaster Electronic Circuit Board Screw Drive Models 3840 *Discontinued*

  • Logic Control Board 315 MHz
  • Compatible with 3840 Screw Drive Purple Learn Button
29-98200

W-Style Universal Drop In Door 98" x 100"

  • Shipped with hardware loose on each side
  • 98" W x 100" H
  • Made with 3/4" thick 7 ply exterior grade medium density plywood
  • Includes all hardware
  • Other sizes available
E041

Rolling Steel Bottom Bar Astragal 679 Sold per Foot

GH151-L5

LiftMaster Gearhead with Brake 1-1/2 HP 115/230V 1P L5

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
.283-3-3/4-LH-C

Torsion Spring .283 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
41A7276

LiftMaster Wear Pads 4/pkg Square Rail Only

  • Fits square trolley rail only
  • Same as 183A163
SOLID_SHAFT_16'

Solid Shaft 1" Keyed 16 ft Galvanized

  • Actual length is approx. 16'-1"
2200-030

Linear Limit Nut

  • Used on various Linear Gate operators
SPREADER003

Chain Tensioner for 1-1/4" / 1-1/4"

  • Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Installation instructions
OPH-6534-ECB

Manaras Opera-H 1 HP 600V 3 Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
37301

Reversing Contactor RM12 24VAC - ** NLA

  • No longer available.
  • Possible substitution # 37407
T101L5

LiftMaster 1 HP 115/230V 1P Commercial Trolley Operator Logic 5

  • Trolley low profile with brake
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Installation ManualManuel d'InstallationSell sheetBrochure
LEVER007

Manaras Disconnect Lever for old MJH

  • Works on model MJH - old units
20418R

Genie Limit Switch Lead Wire Brown

  • Brown - Used to connect down limit to sequensor
  • For Screw drive models
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
OMH-6112-ECB-RH

Manaras Opera-MH 1/2HP 120V 1Ph with Electronic Circuit Board

  • A medium-duty operator designed for use on standard high and vertical lift sectional doors and grills.
  • 14 cycles per hour 50 cycles per day
Installation ManualSell Sheet
860LM

LiftMaster Universal Weather Resistant Receiver

  • Weather-resistant for outdoor mounting requirements
  • Provides convenient access to gated communities industrial facilities and commercial sites all with a single transmitter solution
  • Three channels provide expanded remote control capacity: Channel 1 - 50 remotes Channel 2 - 20 remotes Channel 3 - 20 remotes
  • Multiple remote control options available to provide secure access from the safety and convenience of a vehicle
  • Compact design fits most gate and commercial door operators
  • Compatible with 811LM 813LM and all MAX remote controls
    • .......more details
Programming InstructionsInstructions de programmationSell Sheet
MK-00648

Micanan 1-Channel 24V Receiver with Antenna

  • Comes with antenna MK00719
  • Total of 20 regular remotes can be programmed or 200 of the block coded remotes MK-00660
Programming Instructions
778

Fasteners Hex Head Bolt Gr 5 5/16-18 x 1"1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 5
BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

  • For residential applications. Use CBS-338 for commercial / industrial applications
  • Zinc plated 11-guage steel
  • 1" bore bearing installed
  • Single clipped end
EBOX-HHD-7511-R

Complete Control Box for PRO-HHD-7511 with Mechanical Contactor and Timer to Close

RBH753L5-LH

LiftMaster 3/4 HP 208/230/460 VAC 3 PH Commercial Hoist Operator Logic 5

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
Installation ManualManuel d'InstallationSell sheet
370-3343

Stanley Magnet Assembly for Quiet Glide

CH501L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 115/230 VAC Logic 5 Left Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with CPS-UN4 photoeyes
Installation ManualManuel d'InstallationSell sheetBrochure
315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

  • Guardian model
PULLEY014

Manaras Motor Pulley Standard 2" x 5/8" 5L/B

480LM

LiftMaster Alternate Mounting / Extension Kit for 3800 3900 8900W 8500 8500W

  • Enables the opener to be lowered due to obstructed areas and low ceilings
  • lowers the operator by 6" requires 1-1/2" above the door shaft
  • Installs quickly and easily
  • Same as 480LMB
Installation ManualManuel d'Installation
TH827-12V

Erone 7-Day Timer 12V

  • 12V AC/DC input voltage with battery back-up
  • Form 'C' relay
  • Easy to read LCD Display
  • Manual override button
  • Ideal to keep a gate open during the day
Programming InstructionsInstructions de programmation
1010-PER-FOOT

Replacement Sweep for One-Piece Door Grey Vinyl

  • Fits into the bottom of one-piece 'Stanley' doors.
  • Sold per foot
  • 2" wide
M3-2312

Marantec 2-Button Transmitter 315 MHz 97243/122436

  • Same as part # 65892 97243 122436
  • Includes battery CR2032
Instructions
GITR-3

Genie Intellicode 3-Button Remote 37517S 390 MHz *** To extent of Inventory

  • Replaces Series II GIT-1 GIT-2 & GIT-3
  • Battery Instructions Visor Clip Included
  • Note: Only the far right of the three buttons (1 dot button) will operate those older Genie Intellicode units built from 1995 through 1997.
  • If you have a Genie unit built in 1995 1996 or 1997 this is the only remote that Genie presently makes to operate the Genie garage door openers built during these years.
  • In this special case the remotes can only be used as 1 button remotes and no other multi-button Genie remote is compatible.
Programming InstructionsInstructions de programmation