The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Comes with carwash modification and tracks/chain for doors up to 12ft
The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for
110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to
accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
The Nice Apollo PS224 is a battery back-up for the L-Bar and M-Bar Barrier Gate Operators allowing the gate opener to use it's no blackout feature so you can have emergency power when the power goes out
Front of Hood Mount for Rolling Steel Doors and Grilles.
Variable speed up to 12”/sec with smooth start/stop feature.
Floor level controls with intuitive menu driven interface.
Accepts: (30) 3-Button Remote Controls or (90) 1-Button Remote Controls
Accepts an additional 30 Wireless keypads and Unlimited Dip Switch remotes
Includes: 1 x Powerhead (with 16.5 ft. Integrated Hoist Chain) 1 x Controller 1 x Powerhead Mounting Bracket with Hardware 1 x VFD Cable (22 ft. Standard) 1 x Encoder Cable (22 ft. Standard) 1 x #50 Drive Chain 1 x 40-Tooth Sprocket 1 x LiftMaster Monitored Entrapment Protection (CPS-U Standard
Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
J operators are attached to the door jackshaft to indirectly drive the door
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
Electromechanical small profile edge for rolling steel foor applicaton.
•Touch sensitive signaling allows for immediate stopping or reversing of motion.
•The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip.
•Lead wire: 22 gauge universal
•Sensitivity: nominal 6-8 PSI
•2 wire NO configuration
•Horizontal mount
•ANSI/UL325 recognized component
•One year warranty
Compatible with various LiftMaster® DC Swing and Slide Gate Operators; manufactured after 2016.
This board is backwards compatible for older second generation units but will require UL325 Entrapment Protection System and Photoelectric Sensors or Edge Sensors.
Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.