Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search White
TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • 10" x 24"
TB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6 3/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010-7FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 7ft SSR Rail (1607LM) ***Discontinued***

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LLB620-22

Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LB612-36

Laminated Bumper Standard Black 12" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-24

Laminated Bumper Standard Black 12" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LLB420-22

Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
  • This model has angles on both sides
    • .......more details
LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB406-36

Laminated Bumper Standard Black 6" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
AC636

Aluminium Threshold AC6 x 36" (3')

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft ** price by quote only

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
LB406-24

Laminated Bumper Standard Black 6" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

MK-00546

Micanan Heater Probe in Reducer Mod. (24V 20W 3/8" NPT)

44-60-280

Extension Spring 10' Door - 280 lbs Gold ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 280 lb load
34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

T007

Manaras Trolley Track 7ft for 1/2HP models *Actual length 114"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
T010

Manaras Trolley Track 10ft for 1/2HP models *Actual length 150"*

  • For models MLT/OTH/OTBH 1/2hp only with Chain #48 (#410)
PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manualSpecification sheet
MK-00229

Micanan Transformer 575V-24V-50VA Not Fingersafe

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

HINGE-911-PCG

Powdercoated Hinge #9 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #9 - 0.89 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-411-PCG

Powdercoated Hinge #4 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #4 - 0.74 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
HINGE-111-PCG

Powdercoated Hinge #1 x 11 gauge Grey ** To Extent of Inventory

  • Heavy Duty 11 gauge offset hinge #1 - 0.61 lbs
  • Powdercoated Grey
  • For use with 7/16" stem rollers
K32-8002

LiftMaster Gear Reducer

  • Also known as: 32-8000 G328001 32-8001 328002 328001 32-8002 G328002
8-11-1

Strut Clip Sold individually

  • Hole diameter: 0.260"
02-404

LiftMaster Key Switch Assembly On/Off Nema 4/12 **DISCONTINUED

  • Two Position Key Control Station
  • Outdoor Surface Mt. (NEMA 4/12)
  • Non-Tamperproof
  • OPEN/CLOSE spring return to center (OFF) key removable in center position only.
  • Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
  • Die cast metal enclosure
    • .......more details
PRO-PL-INV-200-23

Micanan Wall Mounted Control Panel with Variable Frequency Drive Mod. 2HP 230V 3 PH

  • Additional charges apply for adding PBS on cover or if panel is not ordered with an operator
90-B

Micanan Keyway 5/16" x 3" Long (Reducer BHC 80) for 2 3 HP

MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MG00018

Micanan Lock Washer 3/8"

  • PRO-GHC operator parts
  • 10 required per operator
MH00043

Micanan Flange Bearing 3/8" D

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

K74-18346

LiftMaster Limit Shaft Kit

2806.139*130

Whiting Spring Assby .139 x 2-3/16 x 13" L Roadside

  • Replacement torsion spring with cones
  • Specs: .139 x 2-3/16" x 13" Long
  • Roadside
  • For Curbside order part # 2807.139.130
MM-00035

Micanan Chain Keeper

SL585103U

LiftMaster Industrial Slide Gate Op.1 HP 208/230/460V 3 Phase - Heater NOT Incl.

  • POWER: 115/208/230 VAC. Single Phase
  • ACCESSORY POWER: 24VAC 500mA max.
  • MONITORED SAFETY INPUTS: 3 Main Board 3 Expansion Board.
  • TEMPERATURE SPECIFICATIONS: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater -40°F (-40°C) to 140°F (60°C).
  • Heater option: HTRNB or NTR460 for 460V operators
  • UL USAGE CLASSIFICATION I II III and IV.
    • .......more details
Installation manualManuel d'installationFirst step for installationPremière étape pour l'installationSell sheetBrochureWiring diagramSchéma câblage
OTBH-6232-AE06

Manaras Trolley Operator 1/2 HP 208V 3Ph with NM Elect. Circuit Board Apt. Model

  • The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
  • 100 cycles per day
  • It incorporates a drum-shoe type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • #41 full roller chain
MH00003

Micanan Oilite Flange Bushing 3/4 ID x 7/8" OD Sold Individually

  • 2 required per machine
3BLM

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
MIRF-Z2

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

  • Meets current UL325 standards for commercial door and gate operators*
  • Thru Beam technology minimizes false reflective signals
  • Travels with the door
  • Easy to Align
  • No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
  • Convenient - Assemble and install in the field
    • .......more details
.331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

  • Custom order to customer's needs
  • Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
  • Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door
R4022

Linear GTO Battery and Transformer

  • Base station not included
IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

  • Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Black powder-coated finish
  • Will NOT fit the new IRB-RET UL325-2018 units
MK-00013

Micanan Relay 120VAC coil DPDT (Flange Mount)

ME00037

Micanan Clutch Shaft Only for PRO-LH

110956.0001

Overhead Brake Band Kit for RMX

  • Brake band kit for the Overhead Door RMX commercial operator.
BOARD060R

Manaras Replacement Circuit Board (No Monitoring)

  • Control board for BOARD065
H503L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Left Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
2806.139*170

Whiting .139 x 2-3/16 x 17" L Roadside with Cones

  • For Curbside order part # 2807.139.170
2807.139*170

Whiting .139 x 2-3/16 x 17" L Curbside with Cones

  • For Roadside order part # 2806.139.170
50615

Splash Proof Cover EHJ / HDC

Drawing
40-3505

LiftMaster Gate Warning Sign Plastic English

PRO-HHD-5083U-LH

Micanan 1/2HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 1/2 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
PRO-HHD-5083U-RH

Micanan 1/2HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 1/2 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
BRACKET111

Manaras Hood Mount Angle Bracket

7-19-1

Lock Bar Guide Only

41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
DM18VL-T/FORCE

Cable Drum Vertical Lift 18' D1100-216-1 Pair Torque Force

  • 18' Vertical Lift aluminum die cast alloy cable drums.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
.207-3-8.25-RHW

Mini Storage Spring .207 x 3" x 8.25" long Right Hand

.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

MP-00002-575V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

  • Controlling action of two lights- sockets supplied on cover
PRO-HHD-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
27089A

Genie Washer

  • Drive shaft washer for PMX500
MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

  • The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply
CB380500

Cable 3/8" 7x19 500' Galvanized

  • Galvanized Cable 3/8" 7x19 500ft spool.
  • Cable break strength: 14000 lbs
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
CB-1.115

Whiting Stainless Steel Cable 115" L with Black Grommet 5/16" Eye

  • 7x7 stainless cable
PRO-HB-7511U-LH

Micanan 3/4HP 115V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake included
MM00024

Micanan Cam Plate for PRO-HHD

.393-514-R

Cut-to-Length Torsion Spring .393 x 5-1/4" Right Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
9006-10

Excalibur Threshold Kit 10'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
1104-8FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Green (R)

  • Green rigid vinyl retainer with green flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
5001-14-WHITE

Residential Side & Top Weather-Strip 14' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-10-WHITE

Residential Side & Top Weather-Strip 10' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

  • C-Flange TEFC electric motor
  • Fits models: GT GH GHC & GSD
K74-MODELH

LiftMaster Main Wire Harness L3

MV-00147

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Key Lock-out & Pilot Light 24V

K94-33961

LiftMaster Wire Harness Kit MT MJ MH

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
MB-15202

Micanan Electric Baldor Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC (Severe Duty)

19-41119M

LiftMaster Roller Chain #41 with Master Links 59-1/2" Long

  • Same as: 195105 19-41119MB 19-4119M 1941119M
MB-15204

Micanan Electric Motor Only 2 HP 575V 3PH C-Flange TEFC 145TC

  • Fits GT GH GHC & GSD
G-18

Molded Rubber Bumper Black 18" L x 10" W 4" Projection 4-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • 4-1/2" depth
  • Ideal for light traffic loading docks.
  • Molded bumpers are molded in one piece and will not warp rust rot or harden.
  • Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
    • .......more details
19-5112

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door

  • For 3/4 & 1 HP trolley operators
.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
6X35PO50

Devanco Loop 6' x 35' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep