Devanco Canada - Get The Right Garage Door Opener‎ and Parts

26-94525

Truck Door Intermediate Panel (15" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

HD8460-138

T-Handle Cable Lock System 1-3/8" ***Use HD8460-200 instead***

Complete cable locking system for 1-3/8" door.
System Includes: Auto Latch Striker Keeper T-Handle keyed with 4" shaft Inside Release Handle 3/32" cable and all required hardware.

CBB18

Stop & Sleeve 1/8" 100 pair

Includes 100 stops and 100 oval sleeves

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

R5209

Cast Iron Pulley 4"

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

R5210

Pulley 4" Zinc Plated Steel with Sheave Strap

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race
Includes fork

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

75LMC

LiftMaster Illumintaed Wall Button 2 wire Universal ** To Extent of Inventory

2 wire wall button for all openers that will activate by connecting the two wires together.

25-10275

Truck Door Universal End Hinge Flush Mount

Steel construction Zinc plated finish
Eliminates routing of panels for easier installation.
Removable cover allows roller change without hinge removal
Includes: Hinge roller cover & kep nuts
Cross Reference: H-325716

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

4X33PO50

Devanco Loop 4' x 33' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

Activates one device
Wire lead antenna
Mounting bracket supplied
Memory: storage for up to 10 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

K23-19380-2

LiftMaster Reset Switch Kit for Miracle-One

Reset switch and Harness

50690

Doorlec Clutch Assembly for ETBH

.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

.306-2-5/8-LH-C

Torsion Spring .306 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .306 ID: 2-5/8" Length: 12 ft

.306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

32-48-110

Extension Spring 8' Door - 110 lbs White ** Replaced by 27-48-110

Double - Loop
32" long 48" stretch 110 lb load
Springs sold individually

Spec Sheet

SPRING027

Manaras Spring for Floor Level Disconnect Lever

spring for DISCONNECT001

3X6SC50

Devanco Loop 3' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

MB-05507

Micanan Electric Motor Only 1 HP 230/460V 3PH Base Mount TEFC FR56

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

ET1820-1

Carlo Gavazzi Through Beam Emitter 20M Plug

High power through-beam photoelectric switch.
Range up to 20 m.
Easily adjustable sensitivity with 270° potentiometer.
LED output indication.
Precise detection through narrow beam.
Short M 18 metal housing for heavy duty applications. IP 67.

.......more details

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

H755L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 575 VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

8069-080

DoorKing MicroPlus 1-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

PRO-H-5038-U-RH

Micanan 1/2HP 380V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

5001-18-BLACK

Residential Side & Top Weather-Strip 18' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

T103L5

LiftMaster 1 HP 208/230/460V 3P Commercial Trolley Operator Logic 5

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

CBB125

Stop & Sleeve 1/4" 100 pair

Includes 100 stops and 100 oval sleeves

GH-343-3/4

Doorlec Industrial Jackshaft Door Operator 3/4 HP 460V 3-Phase

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

.283-2-R-C

Cut-to-Length Torsion Spring .283 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

Wire thickness: .182
Spring length: 33 inches long (assembled length)
Inside diameter: 1.188
Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

RSH-6214-MON-RH

Manaras Rapido Jackshaft Operator 1 HP 240V 1PH W/ Elect. Board N4X Thru Beam Eyes RH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

1104-9FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 9' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

41A5266-1

LiftMaster Brackets for Snappy Sensors (41A5266-3) *** Discontinued

For units from 1993- present equipped with safety sensors
Same as 41A5266-3
For use with with 41A5281
New Gen (2021+) snappy beam sensors 041-0136 are compatible with these brackets and the new 041-0155 brackets
The new brackets (041-0155) are not backwards compatible

20104

Doorlec Coupling Spring 5/8" LJH

76-G0537

LiftMaster Alarm Assembly Kit for SL540/580

Installation Manual

OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

OSH-6114-ECB-LH

Manaras Opera-SH 1HP 120V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

H11G12

Hinge #12 x 11 gauge

11 gauge # 12 hinge - 1.00 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

8-pin

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

ETB-311-1/2HP

Doorlec 1/2HP 115V Contactor Model Trolley Door Opener

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

Designed for use on commercial / industrial sliding doors or sliding fire doors
External radio control terminal strip
3-btn O/C/S control station Nema 1
#41 roller chain & sprockets on all internal drives
Heavy duty 5L v-belt
Solenoid brake standard

.......more details

158176

Set Screw 3/8-16-1 Cup Point Zinc Plated Red Head

K002-KEY

Replacement Key for 3BXLT Key #2

Replacement key only for key #K002

2110-643-UPS

Linear Snap Lock Assembly with Keys (2)

Fits HSLG GSLG-A Ups

CEDO-SPEC-ORDER

Cedo Special Order ** non-stocking items

specify size color details when ordering
Please call for pricing

MG00020

Micanan Flat Washer 1-1/16" ID x 1-3/4" OD

OPH-6214-M-N1-RH

Manaras Opera-H 1 HP 240V 1Ph with Monitored Board and N1 Photoeyes

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

GALV-295-258-L

Cut-to-Length Torsion Spring .295 x 2-5/8" Left Hand Wound Galvanized Blue Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

TDC7-10

Liftmaster Commercial 10FT Trolley Angle set (10-5810-P) and #48 chain pack (TDC48-10) ***Actual length 155"***

Double Angle Rails for doors up to 10'6" high
Includes #48 chain pack

HW0777

Low Headroom Quick Close Device 3" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'

K177A0112

LiftMaster Trolley Spring

Also known as: 177A112 62274 177A0112 062274 132C2180 177A78

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB

041D0190

LiftMaster Power Cord RJO

Replacement 6' AC Power Cord
For use with various LiftMaster® and Chamberlain® RJO Series Wall Mounted Garage Door Openers and Light Duty Commercial Door Operators

GALV-375-334-144-R

Torsion Spring .375 x 3-3/4" x 12ft RH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-343-334-144-R

Torsion Spring .343 x 3-3/4" x 12ft RH Galvanized Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-343-334-144-L

Torsion Spring .343 x 3-3/4" x 12ft LH Galvanized Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized

GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

GALV-250-334-144-L

Torsion Spring .250 x 3-3/4" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

MGH-6536-M-N1-LH

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Q520

LiftMaster Wiring Harness Kit CSW Motor K94-50286

Compatible with LiftMaster® Model CSW200UL Swing Gate Operators

CAMPLATE019

Manaras Cam Plate Opera C-Box

MOTOR271-WIRED

Manaras Electric Motor1/2HP 208/460V 3PH

This item is compatible with BRAKE011

2200-886

Linear Sprocket 50B20 1" Bore

2100-1622

Linear Jam Nut 1"-14W 5/16 Tap Hole

2300-390

Linear Friction Disc 5.5 x 2.06 x .18 pair

2200-015-UPS

Linear Collar Set 1B 9/16 LTB

SHAFT064

Manaras Limit Shaft 5/8"-24x12.5

T120

Manaras Trolley Track 20ft for 3/4HP & ALL APT models up-charge

For models MGT/OTH/OTBH/RTBH 3/4 hp only with Chain #41

SB257B2

NICE Filter Board w/T3.15A Fuse

DC2000

LiftMaster Controller DC2000

DC2000 Controller with battery backup
BackUp Commercial Vehicular Gate Operator
12VDC - 30 Amps Max.
125 lbs. Max. pull @ CSW-200 Units
105 lbs. Max. pull @ SL-3000 Units

15470

Doorlec Heater Strip 250 W 120 V

GH-353-3

Doorlec Industrial Gearhead Door Operator 3HP 575V 3-Phase

Extra Deavy-Duty Gearhead Industrial Operator or large Sectional or Rolling Steel Doors
DC-2000 Logic Board with adjustable Timer To Close Delay On Reverse and Traffic Light Control
Worm gear reducer 40:1 ratio for high-torque and long life
Solenoid Disk Brake Prevents coasting and secures the door when closed
TEFC (sealed) continuous-duty electric motor with overload protection
Optional Friction Clutch available

.......more details

OPH-6533-M-N1-LH

Manaras Opera-H 3/4HP 600V 3Ph with Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

CGH755L5-LH

LiftMaster Gearhead with Brake and Carwash Mod 3/4HP 575V 3P L5 Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MOD021AA

Manaras Safepack 24V Control Circuit

This is an option when purchased with an operator

FRONTIDLER006

Manaras Front Idler Assembly #41 Very Heavy Duty

MOD073

LB710-14

Laminated Bumper Standard Black 10" x 14" 7" Projection Horizontal Installation ** Special Order

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

GALV-312-334-R

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Galvanized Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED
Galvanized

GALV-375-6-144-LH

Torsion Spring .375 x 6" x 12ft LH Galvanized Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft
Galvanized

PRO-EHJ-7583U-RH

Micanan 3/4 HP 208V 3PH Cont. Duty Jackshaft N1 Eyes Monitored ECB Right Hand

Comm / Ind Continuous Duty Belt Drive with Emergency Chain Hoist
24V class 2 control circuit with 40VA transformer to protect against short circuit
On board receiver with antenna
External radio control terminal strip
Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly •Three button open-close-stop control station Nema-1
Continuous duty industrial motor with overload protection

.......more details