You can replace the battery with a power supply by removing the SETMC1C9V battery adapter and connect the red (9V)
and black (0V) wire into power supply
Connect a door contact motion detector or any relay activated devices to the SETMC1C9V it will communicate their status wirelessly
The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.
The extension kit for C-channel chain drive garage door opener rails is to be used in addition to a 7' (3-piece) chain rail to accommodate an 8' high door
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
GH operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
MyQ Mobile App is a free download with no annual activation fee.
LiftMaster® IPAC (Internet Protocol Access Control) is the first Internet-enabled outdoor access control system with Voice-over Internet Protocol (VoIP).
By harnessing the power of a high-speed connection IPAC’s innovative technology allows you to work smarter and more efficiently and its contemporary design features a durable enclosure which enhances your property’s image.
Make updates 24/7 through an IP address (no software to install) so you never have to take IPAC offline.
Manage resident info from any browser on your LAN so you do not physically visit the unit.
VOIP technology eliminates long distance fees and will be replacing old analog phone lines.
50000-resident capacity so you’ll never run out of system memory.
19X7 SS 3/16” Rotation-Resistant Wire Rope was conceived for overhead cranes but manufactured specifically for high-performance garage doors.
A spin-resistant construction coupled with the corrosion-resistance of stainless steel is the perfect mix of resilience and performance for high-traffic areas.
The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
Controls 2 doors / 4 readers (entry/exit per reader port)
Add more A22Ks to expand your system up to 500 doors
Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core
Standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented roll-formed integral struts on each section making them the most rigid doors available
Thermospan® Model 125 is suitable for commercial and industrial applications.
Includes: access door with a hole for a standard or fire department padlock interior micro switch knock out for Knox key switch and standard cylinder lock
Two options for automatic gate access: 1) micro switch is activated when the padlock is removed and the front panel is opened or 2) via Knox key switch
NOTE: fire department padlock and Knox switch NOT provided
The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
R12 Insulation - Short Panel with vertical lines carriage style - Panel spacing to accomodate decorative hinges and handles - Available in steel white and black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
The product configuration provides four laser-based curtains offering a three dimensional safety zone each capable of 360 in x 360 in (30 ft x 30 ft)
Designed for the detection of people and vehicles in both indoor and outdoor environments
The detection accuracy makes this sensor ideal for high performance industrial doors vehicle flow safety perimeter protection and a variety of applications. Detects objects as small as 2 inches at 30 feet away
IP65
Operating temperature: -22 to 140F
Three visible LED spots provide accurate reference points when adjusting the tilt angle.
This is a Current Sense Harness (230/460/575V) Replacement Kit.
Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; manufactured after February 2016.
Complete replacement kit includes: (2) current sense harnesses of different lengths to accommodate all models.
Models manufactured before February 2016 DO NOT feature current sense technology.
We highly recommend replacing the existing boards with an updated Logic 5.0 system that utilizes current sense technology
Refer to the following replacement boards for compatible upgrades:
K001D8395 1PH/3PH Logic Board for all L5 models
K001D8397 3PH/L5 Power Board 230/460V
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.