Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door Garage Door
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1212-14

Laminated Bumper Standard Black 12" L x 14" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
CB31605000-KOR

Cable 3/16" 7x19 5000' Galvanized Supreme ** Price on request

  • Galvanized cable 3/16" 7x19 5000ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Stainless Steel Cable Specifications
6200-2-4-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 3.48" Short Stem

  • 2" diameter white nylon tire
  • 6200 sealed precision bearing
  • Zinc plated 4.56" Overall length 3.48" stem
  • Rating: 100lb; 100000 cycles of a 12′ door
CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
  • This end cap will also work on the CPT223 extrusion
V3563-00-W-200

Vinyl Seal 3" Bottom Bead End 198" Bead Grey 200' Spool

  • Bead diameter 3/16"-7/32" +/- tolerance
MK01245

Micanan Fuse 3A 250V Sold Individually

  • For Micanan circuit boards
  • Sold per fuse
HD-15

Reflector Hood for 3" Round Reflector

  • Black/Charcoal
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

MM00008

Micanan Frame GHC MSI0034

TRACK-2"-RAW-9

Raw Vertical Track 2" 9'-0" Sold per Piece

V3564-00-W-200

Vinyl Seal 4" Bottom Bead End Grey 200' Spool

  • Bead diameter 3/16" - 7/32" +/- tolerance
.319_2-5/8"-LH

Torsion Spring .319 x 2-5/8" x 12ft LH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.343_2-5/8"-RH

Torsion Spring .343 x 2-5/8" x 12ft RH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.319_2-5/8"-RH

Torsion Spring .319 x 2-5/8" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 2-5/8"
  • Length: 12 ft
RELAY068

Manaras Relay SPST 24VDC

CDJH-34-115-ECB

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V with ECB Right Hand UL325

  • 3 Button station (NEMA 1)
  • 1650 RPM high starting torque motor with overload protection
  • Inherent Mechanical Brake (I.M.B)
  • B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
  • On board Open Close & Stop for ease of setting limits
  • Pre-wired to accept sensing devices
    • .......more details
MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details