Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door Garage Door
T-931-S

FL-Heddolf 1-btn Transmitter 311 MHz

  • Also known as 311DEK31V2
Installation manual
BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
P220-2K

Heddolf 2-btn Transmitter 8-Dip Switch 318 MHz

  • Allstar compatible remote
HSC-600-B

Bench Swager 1/16" - 3/16"

  • Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
  • Wire rope cutting capacity 3/16”
  • Made in Japan
EXA-1000

Linear Omni-Directional Remote Antenna (AAE00198)

  • The EXA-1000 is a 1/2 wave center fed vertical antenna composed of three parts: an Antenna assembly with an F connector attachment; a Base Plate assembly with radial mounting provisions; and a five-foot 75-ohm coaxial cable.
  • The cable connects to the antenna base on one end and the receivers F connector on the other.
  • If the antenna must be mounted further than five feet from the receiver an extension cable of up to a maximum of 25 feet may be used instead of the five foot cable supplied.
  • Because of the cable resistance the performance of the EXA-1000 may be degraded by using longer than a 25 foot cable
  • Compatible with all Linear receivers with Type F antenna connector
  • Receives signals in 288 to 320 MHz range
    • .......more details
Installation manual
041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1
.273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Orange/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
19-5810

LiftMaster Trolley Chain Pack #48 for 10ft Door

  • Chain pack only
D525-54-HL-125

Cable Drum High Lift 54" 1-1/4" Bore Torque Force Pair

  • Maximum hi-lift: 54"
  • Capacity: 500 lbs per drum
  • Max. cable size: 3/16"
  • Cable length: Floor to shaft center 66" minus amount of Hi-Lift
  • Cross reference: DNS 54-125 OMI 54HL-125 M134-1375-125
CB5320500

Cable 5/32" 7x19 500' Galvanized

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
Comparison charts
ME00002

Micanan Clutch (Input) Shaft Only for Pro-H/HB

  • 3/4" x 16-3/8"
RS1311

Roller 3" Steel 11" stem Precision Bearing

  • Steel Roller Wheel diameter: 3" 11" stem length 7/16" stem dia
H11G08

Hinge #8 x 11 gauge

  • 11 gauge #8 hinge - 0.87 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
H14GHALF

Half Hinge #1 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 1-5/8" wide with slotted holes
MK-00719

Micanan Replacement Antenna for On-Board & External Receiver

  • Approx. 8" long
25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
25-42-120

Extension Spring 7' Door - 120 lbs Green

  • Double - Loop
  • 25" long 42" stretch 120 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
T2B-DS

Lynx 2-btn Transmitter Dip Switch 303 MHz

  • Ultra secure mid-size transmitter with 8 dip-switches for coding
  • 2-buttons provides control for 2 Lynx operators
  • Compatible with HomeLink in-vehicle remote control
  • Can be mounted on visor with saddle clip or carried on a keychain
  • Visor clip and 12V battery included
  • Will work with Lynx residential operators built from 2000 and up.
    • .......more details
Compatibility chart