Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Genie / Overhead
OCDFX1

Overhead Door 1-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX1.S GIDFX1.S
Programming Instructions
108135.0004

Overhead Serpentine V- Belt for JST 31"

  • Overhead Door commercial garage door opener serpentine belt 108135-0004
  • Type "J" 31"
36764A

Genie Chain and Belt Pulley (#39591A)

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Both for Chain and Belt Openers
  • Front Idler Pulley for Genie 4024
  • New part number #39591A
41181R.S

Genie Main Control Board Kit 6070H 6170HB

  • Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
  • DOES NOT include the Genie Aladdin Connect Control Board #41153R
39902R

Genie Wireless Wall Console GWWC-P

  • Completely Wireless Installation – No need to have an additional wired wall console -absolutely no wiring required for operation!
  • Works with all Genie Intellicode® openers since 2013. (Not compatible with Models 1022 1024 1042 2022 2024 2027 2042.)
  • Large buttons and attractive blue LED light makes the console easy to see in the dark.
  • The pulsating light has two optional speeds or can be turned off for maximum battery life.
  • Backlighting will turn red to notify the user of low battery.
  • Turn only the garage door opener light itself on at any time for steady light in the garage.
    • .......more details
37557R

Genie Chain Drive Bullet Assembly

  • This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
  • Works with chain model Genie garage door openers that have a C-Channel rail.
  • The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
  • Assembly contains: The 2 Bullet side white pieces and the four screws to install it
  • Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)
GIDFX3.S

Genie 3-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX3.S GIDFX3.S
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
39153R.S

Genie Optical Encoder AC Screw Drive Models

  • Compatible with models; 2562 2564 2568 PowerLift® GPower 900
  • Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
  • Single & Dual encoder
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
36773S

Genie Carriage Assembly for 8' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
36773R

Genie Carriage Assembly for 7' Door

  • Works on Genie IntelliG 1000 & 1200 Garage Door Openers
  • Includes: carriage emergency release rope and straight arm.
  • Carriage assembly connects to the shuttle assembly and in turn creates the manual release function for the garage door.
30257T

Genie Coupler Screw Drive Units

  • Used for attaching the screw of Genie screw drive rail to the motor head.
  • This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
  • If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
  • To check and replace that part remove the two screws holding the rail to the main power head
  • Mounts on rear of opener rail and fits in motor head.
36051R

Genie Replacement Carrage Assembly

  • For Genie belt drive garage door opener model 2040L
36196A

Genie Sprocket Saddle

  • Sprocket Saddle for Genie PMX Chain Drive Openers With T Rail
  • Uses # 27191A.S Sprocket ( Not Included)
27191A

Genie Opener Sprocket 10 Tooth

  • 10 Tooth Sprocket.
  • For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.
28018A-KIT

Genie Inner Slide Bullet and Retainer Kit Belt Drive

  • Kit includes part # 28018A and # 28019A
  • Fits Many Genie and Overhead Door Belt Drive Openers with C Rail
  • Includes 1 Belt Bullet and 2 Retainers
39438R

Genie Garage Door Opener LED Bulb LEDB1-R 1/Pkg

  • Unlike other LED and CFL bulbs this bulb will reduce or eliminate radio frequency interference
  • Uses 10 watts but equivalent to a 60-watt bulb
  • Works with almost all garage door openers
  • Lasts up to 25000 hours
  • Shatter-resistant vibration-resistant
  • Cold weather rated up to -30C
    • .......more details
38476R

Genie Master Belt Drive Rail Extension Kit for 8ft Doors

  • The Genie Master Belt Drive Extension Kit is an extension for C-channel and T-type rails to be used in addition to the 7 ft. (3-piece) rail to accommodate an 8 ft. high door.
  • The extension kit is designed specifically for Genie belt drive openers.
  • Belt and instructions included
  • Compatible Genie SilentMax 1200 SilentMax 1000 QuietLift 800 and BeltLift
19863R

Genie Clip and Collar Rail Connectors

  • For Genie screw drive units having split rails use a collar and spring clip to join the 3-piece screw.
  • Complete collar and clip set for one 3-piece rail.
  • Compatible with all screw drive Genie garage door openers
  • Set of 2 clips and 2 collars
  • Same as 19806A04 and 19807A04