Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Miller Edge
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
ME120-BLK-E-4FT

Miller Edge 2-Wire Black End Outlet 4 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
RLC-K72

Miller Edge Light Curtain Non- Monitored 6ft

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
Installation manualsell sheet
PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

  • Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
  • When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
  • Applications: rolling doors sectional doors and mass transit.
  • Electrical configuration: 3-wire SPDT
  • Temperature range: -20F to 158F
  • Max pressure: 20 PSI
    • .......more details
Installation Manual
MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
ME113-E

Miller Edge Black End Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

  • RBand is a monitored sensing edge transmitter/receiver system.
  • The receiver can be paired with up to three transmitters.
  • On board diagnosticsallows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
    • .......more details
MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
ME116-BLK-LH

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide-in edge for sectional doors.
  • With appropriate mounting channel this edge will fit nearly all doors from 1-1/2" to 2" thick. The ME116 has been designed to fit all CHI doors with double track bottom retainers.
  • ME116 is resistant to flame water and most common greases and oils
  • Soft ends
  • Temperature range -30F to 155F
  • Lead wire: 22 gauge universal
    • .......more details
MGR20-B-2U-PER-FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Sold Per Foot

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
  • Non-monitored edge
  • Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)
MGR20-Y-2U-04

Miller Edge Sensing Edge Round Yellow 2-Wire Universal Outlet 4ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates.
  • 3-sided activation allows for immediate stopping or reversing of motion
  • Contours to round or square posts.
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
    • .......more details
Installation ManualSell Sheet
MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.